Jump to content

Recommended Posts

Posted

 

2 inch fabtec level, tinted tail lights, 285/70/17s sub and amp, and muffler delete

20151101_090431_zpsrczq2nfn.jpg

 

What brand of rubber did you go with? I can't quite tell by the pictures? I like the look of the 17's and I'm thinking about going with 285's for my next set of tires.

Posted

 

What brand of rubber did you go with? I can't quite tell by the pictures? I like the look of the 17's and I'm thinking about going with 285's for my next set of tires.

I ended up using the Mastercraft Wildcat A/T 2s I had on my 2008 sierra. over all a very good tire. great on snow, mud, gravel, and pavement. Still havnt gotten around to painting wheel lips to match my new truck lol. But I am very happy with my tire choice, and for a cheaper tire they have done very well. If I don't go to a mud terrain, I will be putting these back on.

 

<a href="http://s482.photobucket.com/user/levi59912/media/Mobile%20Uploads/FB_IMG_1451425549033_zpsfwrfv4za.jpg.html" target="_blank"><img src="http://i482.photobucket.com/albums/rr183/levi59912/Mobile%20Uploads/FB_IMG_1451425549033_zpsfwrfv4za.jpg" border="0" alt=" photo FB_IMG_1451425549033_zpsfwrfv4za.jpg"/></a>

 

 

as you can see, the only downside is they aren't very aggressive looking

 

<a href="http://s482.photobucket.com/user/levi59912/media/Mobile%20Uploads/20151229_143045_zps1r1fmqvy.jpg.html" target="_blank"><img src="http://i482.photobucket.com/albums/rr183/levi59912/Mobile%20Uploads/20151229_143045_zps1r1fmqvy.jpg" border="0" alt=" photo 20151229_143045_zps1r1fmqvy.jpg"/></a>

 

don't mind the dirt, its a little too cold to wash the truck this week haha

Posted

I ended up using the Mastercraft Wildcat A/T 2s I had on my 2008 sierra. over all a very good tire. great on snow, mud, gravel, and pavement. Still havnt gotten around to painting wheel lips to match my new truck lol. But I am very happy with my tire choice, and for a cheaper tire they have done very well. If I don't go to a mud terrain, I will be putting these back on.

 

FB_IMG_1451425549033_zpsfwrfv4za.jpg

 

 

as you can see, the only downside is they aren't very aggressive looking

 

20151229_143045_zps1r1fmqvy.jpg

 

don't mind the dirt, its a little too cold to wash the truck this week haha

sorry those links didn't work, I will try these ones

  • Like 1
Posted

here is an unedited pic after I debadged it.

 

20151106_132322_zpswnijewba.jpg

 

 

Really nice looking truck!

 

New to the site but I have a 2015 tungsten and I'm putting the 2" RC level on next week, thinking about going with the ProComp 32 Series 17x9 with 285/75/17 Nitto Trail Grapplers

Posted

Any quick recommendations for which particular brand or size of leveling kit I should go with on my new 2016 Sierra Denali?

 

I'm still unsure of any drawbacks to a leveling kit due to the magnetic suspension. Is this a concern? I just want the front brought up to where the rear is... flat and level. Thanks!!

 

I am in the same boat with my 2015 Denali. I am hearing Suspension Maxx is the only kit right now specifically made for the magnetic ride? I am wanting about 2" of lift so that I still have a little rake.

Posted

No clearance issues. No power issues, but I also added a CAI, exhaust, and a Diablo Tuner. My highway MPG with the BFGs and level was still at about 20mpg after the other additions. I actually no longer have these tires because the two rear ones got cut pretty badly (rocks on a trail I assume). For my new set, I chose to go with Nitto G2 285/75r18 (much better warranty with this size of tire), still have the stock wheels. For my next set, I will go wider as I liked the way the wider tires looked.

 

The Nitto G2 285/75r18 is almost a 35" tire! I don't think I have come across anyone running that size with a level. Do you have any pictures of your truck with that tire on it?

  • Like 1
Posted

Who do you all recommend installing the leveling kit? I imagine the dealer is going to overcharge. I'm going with the RC 2.5" and will be having 285/65/18's put on at the same time so I'm looking for an alignment and headlight adjustment as well.

DIY the level, it's easy enough.

  • Like 1
Posted

 

The Nitto G2 285/75r18 is almost a 35" tire! I don't think I have come across anyone running that size with a level. Do you have any pictures of your truck with that tire on it?

I put the the Bilstein adjustables on in addition to the level and set the Bilsteins on the highest setting and added a 3" rear block (as opposed to the 1.25" rear block). So I have about 3.75" of lift up front and 1.75" in the rear. I'll put some pics up once I get home from work.

Posted

Posted in a different post but came across this thread so I thought I'd post here as well

 

I have a 2014 Silverado 1500 4x4 with the V6. Love the truck but it looks like a 2x4. I am planning on installing the RC 2" leveling kit and putting Nitto Terra Grappler G2 p285/70/17 on it soon.

 

The truck came with 255/70/17. I'm wondering if this is a good choice. I'm not going to do a lot of off road stuff (maybe some hunting/fishing/camping trips where 4x4 is needed) but mainly wanting to give it a beefier look.

 

With the 2" level kit will I have any issues with rubbbing? Will that tire fit my factory rims? I'd love to have new rims but can't spring for everything all at once

 

Thanks

Posted (edited)

Ok I'm sure it's been beat to death but I have a 15 GMC all terrain and want to add the 2.5 RC leveling kit. But I'm having a problem with the size of tires I want. Thinking of the KO2s but unsure of the size. Option 1- ko2s 275-65-20s or option 2- the 285-65-20s? liking the 275-65-20s but would like them a little wider. Would I have a clearance issues or rubbing issues with the 285s? From what I understand is the 275s are 34.1 and 10.8 wide and the 285s are 34.6 and 11.2 wide. Any and all advice much appreciated. (On stock AT wheels) any and all pics would be great as well Thanks again

Edited by Steeks
Posted

This has been discussed at least 1,000 times. Look in the tire/wheel section of the forum, everything you need to know about tire & wheel combinations and fitment will be there.

 

 

Sent from my crappy iPhone 6

using Tapatalk

  • Like 1
Posted

Ok I'm sure it's been beat to death but I have a 15 GMC all terrain and want to add the 2.5 RC leveling kit. But I'm having a problem with the size of tires I want. Thinking of the KO2s but unsure of the size. Option 1- ko2s 275-65-20s or option 2- the 285-65-20s? liking the 275-65-20s but would like them a little wider. Would I have a clearance issues or rubbing issues with the 285s? From what I understand is the 275s are 34.1 and 10.8 wide and the 285s are 34.6 and 11.2 wide. Any and all advice much appreciated. (On stock AT wheels) any and all pics would be great as well Thanks again

 

I don't run 20s, so I can't help you, but there are hundreds of posts about those exact sizes. Look up the KO2 thread.

  • Like 1
Posted

Who do you all recommend installing the leveling kit? I imagine the dealer is going to overcharge. I'm going with the RC 2.5" and will be having 285/65/18's put on at the same time so I'm looking for an alignment and headlight adjustment as well.

 

I would not recommend going to the dealer. I happen to have a local shop that will do my RC 2" install for about a buck 50 including the alignment. I would just recommend doing a little research in your area. But if you have the time you can always DIY, from what I understand its a pretty straight forward install.

  • Like 1
Posted

Anyone recommend any shops in south Louisiana to install lifts?

 

How far south?

 

I'm in BR. Actually called two places yesterday asking for some estimates to level my truck.

AMR Automotive and Kirks.

Both are around $350 for parts, install, and tire alignment. For what it's worth, I will probably be going in the next week or so to one of these to get it done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I know; crap pictures.   Anyway, as a finale of sorts to this thread, I had replaced both differential covers and since they had the capability of adding temperature probes, I did that. These are MaxTow analog/digital gauges with stepper motors. They'll flutter around like crazy for a moment and start at a nominal 100 degrees Fahrenheit.   I drove a 30-mile loop to the grocery store, averaging 70 MPH (as much as 80 to see if there was a quick spike in temperature. The air temperature is 102 (ambient ?). but the first pic is 7 miles into the trip. The second is getting back into the truck after leaving the store; differential temperatures dropped about three to four degrees in 15 minutes. The third pic in on the road to my house, about a mile away.   In that run, I saw a high of 150F on the rear differential, and 121F on the front. I'm sure a longer drive or towing will see higher than that, and when that happens, I can update the observations. 
    • You don't want to become predictable now, do you? 😏
    • Fully warm, coolant temp >194, closed loop.   Run time can be anywhere from just reached operating temperature to having driven 30+ miles.   The O2 chart (which is a feature I just discovered after reading) for the bad idle seems to be "most" of the time. For the little time I've been watching it (scanning and driving! watchout!) I can't seem to isolate any cause or condition yet.   It definitely idles rougher sometimes than others and so far what I've seen is the rougher idles are always rich. But not enough to set a CEL.   In other news I replaced the starter solenoid. Everything on this truck is such a PITA. Starter "snout" is mangled up with the torque converter inspection cover which is tangled up with hard cooling lines and the driveshaft. But I got 'er done without too much swearing...I just go into everything now knowing it's going to be a frustrating mess.   The starter solenoid replacement kicks off the next round of work: AC, injector rebuild, cat, exhaust. I'm just going to do it all. But first:   I don't know what my fuel pressures are. I can't definitively say the issue is the injector without first verifying fuel pressures and any leakdown. I "rented" a test kit ($199.99 at O'Really's ...intentional misspelling). They don't "rent" tools anymore, they charge you for the tool and then you return it when you're done. No joke. It is listed as a rental on the receipt but the guy told me there's no difference between renting and buying  now, you just return it when you're done and they refund the credit card. Mmmkay, whatever.   I will rule out fuel pressure issues (too much), and any leaking (that's how I'll know the problem is inside the intake). I think someone said the return line could be plugged or not flowing and that could cause high fuel pressure (and too much fuel being pushed through injectors). I'll cross that bridge if I get high readings.   As of now I'm ready to tear off the intake cover, extract the injector, and have it sent off to be rebuilt just so I can rule that out.
    • What are the conditions of this rich idle? Warm or cold engine? Run time? Does every idle look like this or only sometimes?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...