Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

Jibroussard New Member

Jibroussard

Posted
Posted

49.99 free shipping on ebay with u bolts

post-153946-0-91490600-1454521340_thumb.png

post-153946-0-38913500-1454521369_thumb.png

post-153946-0-91490600-1454521340_thumb.png

post-153946-0-38913500-1454521369_thumb.png

post-153946-0-91490600-1454521340_thumb.png

post-153946-0-38913500-1454521369_thumb.png

post-153946-0-91490600-1454521340_thumb.png

post-153946-0-38913500-1454521369_thumb.png

  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

Abcman Enthusiast

Abcman

Posted
Posted

Truck looks sharp!!!

I think i will be getting toyo MTs when i do my lift.... Only on 33s right now with a level.

I need the white handles and mirrors!!!

Sent from my Note 4 on Tapashit

Thanks. I love the Toyos so far, and the white mirrors and handles definitely add a nice finishing touch to these trucks.
Col 10 Enthusiast

Col 10

Posted
Posted (edited)

2.5 moto fab spacer stock rear blocks on 275/60r20 toyo at2's

 

FDD7724C-E4C0-4A42-917A-3E705D2EBBF7_zps

424CF2D8-1F90-4F4B-B139-73BD7AD35CE3_zps

Edited by Col 10
  • Like 2
SlavO Enthusiast

SlavO

Posted
Posted

Had some 295/60r20 Toyo MT put on my truck this weekend. Zip tied the liner back and no rubbing besides on the sway bar at full lock. I only have a 2.5" Traxda leveling kit on the front.

BBB2E350-B994-4349-A064-87B59E63F165_zps

Looks nice.... can i see a pick from the front or back
Boogie651 Enthusiast

Boogie651

Posted
Posted (edited)

So I am contemplating getting some 17x8.5 0 offset Method NVs wrapped in either 285/70r17 BFG KO2 or 295/70r17 Nitto Terra Grap G2s.

 

I am aware that the 295s might rub but I'm confused on where. Sway bar, liner or metal?

any input would be appreciated!

 

Will be running a 2.5" RC level as well.

Edited by Boogie651
bcbz71 Enthusiast

bcbz71

Posted
Posted

Had some 295/60r20 Toyo MT put on my truck this weekend. Zip tied the liner back and no rubbing besides on the sway bar at full lock. I only have a 2.5" Traxda leveling kit on the front.

BBB2E350-B994-4349-A064-87B59E63F165_zps

 

Toyo says that's a 34.2x11.8 tire. Impressive that you fit that on stockers with a 2.5. I'm real interested in more pictures of the clearances in all the left and right lock position. Also, the actual height and width with them mounted and the truck weight on them.

 

Awesome truck!

Txjose Senior Enthusiast

Txjose

Posted
Posted

 

Toyo says that's a 34.2x11.8 tire. Impressive that you fit that on stockers with a 2.5. I'm real interested in more pictures of the clearances in all the left and right lock position. Also, the actual height and width with them mounted and the truck weight on them.

 

Awesome truck!

Same here....

 

I have 305 55 20s and they rub.... I can imagine 295/60s.....

 

Mine is a 33x12.50x20

 

Sent from my Note 4 on Tapashit

Abcman Enthusiast

Abcman

Posted
Posted

Looks nice.... can i see a pick from the front or back

I'll have to take one. I haven't had the chance to take many pics yet.

 

Toyo says that's a 34.2x11.8 tire. Impressive that you fit that on stockers with a 2.5. I'm real interested in more pictures of the clearances in all the left and right lock position. Also, the actual height and width with them mounted and the truck weight on them.

 

Awesome truck!

Well they "fit" with a little help. I had to zip tie the liner back, but the tire gets very close to the plastic piece on the bottom of the fender beside the door. I'll get some pictures of the clearance with the liner pulled back.

sandy.vallee Enthusiast

sandy.vallee

Posted
Posted

Ive got a 2015 GMC sierra All terrain and am running 275/65R20 Nitto Trails with a 2.5"RC level. I rub the fender liner when turning probably 80% of the time. Also rub the sway bar at full lock every time.

I also put 295/60R20 Nitto Trails before this set. The 295 rubs like hell. Rubs on sway bar significantly, rubs on liner, rubs on metal behind liner. For those who say they do not rub, Y'all must be crazy. Truck also looked too small for the tires that big with only a level.

My buddy has a 3.5" RC lift and he is running the 295/60R20 Nitto trails. HE even rubs too, including sway bar and fender liner.

Clocked92 Enthusiast

Clocked92

Posted
Posted

Here's a pic of my 2014 Sierra AT on 275/60R20 KO2's and Bilstein 5100's in the front set on max height. No block in the back.

post-131252-0-69786300-1454620783_thumb.jpg

post-131252-0-69786300-1454620783_thumb.jpg

post-131252-0-69786300-1454620783_thumb.jpg

post-131252-0-69786300-1454620783_thumb.jpg

  • Like 2
Cjb3435 New Member

Cjb3435

Posted
Posted

2016 slt z71 2.5 rc level. I'm running 275/65/20 ko2. The only rubbing I had was full lock to the right on the liner which I zip tied. Now I have zero issues.

Abcman Enthusiast

Abcman

Posted
Posted

Here's some pics a few members asked for

1454626784_zpssmw9hhya.jpg

 

Here's a picture with the wheel being held at full lock. The tire is probably within an 1/8" of the liner but it isn't touching. I'm sure if I flexed the suspension some it would rub.

1454626656_zpsduk6gm3a.jpg

 

Ive got a 2015 GMC sierra All terrain and am running 275/65R20 Nitto Trails with a 2.5"RC level. I rub the fender liner when turning probably 80% of the time. Also rub the sway bar at full lock every time.

I also put 295/60R20 Nitto Trails before this set. The 295 rubs like hell. Rubs on sway bar significantly, rubs on liner, rubs on metal behind liner. For those who say they do not rub, Y'all must be crazy. Truck also looked too small for the tires that big with only a level.

My buddy has a 3.5" RC lift and he is running the 295/60R20 Nitto trails. HE even rubs too, including sway bar and fender liner.

 

That's strange that the same size rubbed so bad on your truck. Where did it rub on metal at? I wouldn't recommend the 295/60r20 for somebody that just wants to throw on a big tire and not touch anything. A 295/55r20 would be better for that. I just wanted a little more meat.
  • Like 2
AgDoctor Senior Enthusiast

AgDoctor

Posted
Posted

Mine are Not to Terra G2s in LT275/65R20 and mine rubbed before a zip tie on each side, but not anymore.

 

Sent from my SM-N910V using Tapatalk

Txjose Senior Enthusiast

Txjose

Posted
Posted

Mine are 305 55 20s and rub just a little bit on the sway bar i think it is.

 

Zip tied the liner on the driver sode as well....

 

Sent from my Note 4 on Tapashit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Cold start Miss, oil in cylinder

      By newdude · Posted

      Its coolant disguised as oil.   TSB 20-NA-166 -  20-NA-166 1..3   "To inspect for this concern, add coolant dye to the system, run the engine through warm up, pressurize the cooling system after warming the engine to operating temperature (let the engine cool overnight) and inspect the suspect cylinder with a borescope for coolant dye evidence. At times it may be necessary to remove the head for inspection. If the head casting line is the concern, the intake port will be wet with a coolant oil mix"
    • asilverblazer
      Cold start Miss, oil in cylinder

      By asilverblazer · Posted

      Can you sample the pooled liquid, enough to confirm it is oil?   ...That its not fuel or coolant.   Also, make sure combustion gases aren't entering the cooling system.   Simply put, either oil being pushed up past the rings (this really isn't possible), oil leaking past the head gasket, oil leaking past the valve, oil entering through the intake air path. If none of this is likely - it may not be oil.   What could be likely is the fuel injector leaking down. A puddle of gas would still smoke and rough idle. (Same cylinder has the same problem after injector replacement?)   What is the crank time first thing in the morning, when the puddle would be present? Does it seem like the high pressure fuel pump needs an extra second or two to rebuild the pressure that injector 8 may have let bleed off? Check the fuel pressure via a scanner prior to starting the engine.    
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      Good information!  I didn't know about the dementia aspect and asked for a general for my second knee. I'd heard that recovery room time is usually shorter with a general.   The anesthesiologist talked me out of it and I had the spinal.  Inconvenience and/or discomfort is a small price to pay for reduced risk!
    • garagerog
      Navigating senior years.

      By garagerog · Posted

      This is for those over 70 years of age contemplating joint replacement surgery involving general anesthesia. Even some 55 yrs. ago when I took my pharmacology class the dangers of developing dementia in the elderly that had general anesthesia were beginning to be recognized. Over the years there has been some refinement in the cautionary warnings, avoid general anesthesia if possible if you've had close to 10 priors, especially over the age of 70 and/or a family history of dementia. I'm not including the twilight anesthesia induced by propofol often used in cytoscopies or colonscopies. Seriously think about seeing a neurologist and undergo cognitive testing before proceeding if any of those criteria apply to you. Spinal anesthesia may be an option in some cases. I'm in the above camp and although I could use a new right knee, I get fidgety according to a prior orthopedic surgeon when the bone saw spools up or maybe it was the smell of saw blade meeting bone, anyhow I may have one general anesthesia left in me which I will pocket for now and I'm choosing mind over mobility, anyway where did I leave my damn cane!
    • GMCustomerService
      July 2026 upgrade push issues

      By GMCustomerService · Posted

      We understand your frustrations with your auto start/stop, fuel gauge and cruise control concerns since your latest update, @LarT-26. You mentioned getting repairs completed, however, have your concerns been resolved? If not, we would like to learn more so we may explore the best path of assistance moving forward alongside your local dealership. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...