Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

ChrisTronyxYocum Enthusiast

ChrisTronyxYocum

Posted
Posted

I have a 2016 and I'm not sure whether I'd need the aluminum or steel version of the RC 2.5" kit. Is this just a preference or does it matter on what your truck is actually using for the stock control arms? Sorry if this is a noobie question, but I just got the truck and am still learning.

  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

Aldila Enthusiast

Aldila

Posted
Posted

I have a 2016 and I'm not sure whether I'd need the aluminum or steel version of the RC 2.5" kit. Is this just a preference or does it matter on what your truck is actually using for the stock control arms? Sorry if this is a noobie question, but I just got the truck and am still learning.

It's important. You use the kit that matches which controls arms your truck is equipped with, steel or aluminum.

  • Like 1
ChrisTronyxYocum Enthusiast

ChrisTronyxYocum

Posted
Posted

It's important. You use the kit that matches which controls arms your truck is equipped with, steel or aluminum.

 

That's what I thought, but wasn't entirely sure, thanks. Unless someone can tell me, I guess I'll grab a magnet and climb under the truck.

Aldila Enthusiast

Aldila

Posted
Posted

That's what I thought, but wasn't entirely sure, thanks. Unless someone can tell me, I guess I'll grab a magnet and climb under the truck.

I've had a 14, 15, and now a 16. The black arms have been steel and silver were aluminum from my experience.

  • Like 1
wheezy Enthusiast

wheezy

Posted
Posted

anyone know what the 2015 1500 high country has for control arms, id go look but im deployed ;( and id like to order the kit prior to being home

ChrisTronyxYocum Enthusiast

ChrisTronyxYocum

Posted
Posted

I've had a 14, 15, and now a 16. The black arms have been steel and silver were aluminum from my experience.

 

Awesome, thanks!

Big Whiskey Senior Enthusiast

Big Whiskey

Posted
Posted

 

That's what I thought, but wasn't entirely sure, thanks. Unless someone can tell me, I guess I'll grab a magnet and climb under the truck.

Yep, the magnet test is pretty full-proof, haha.

  • Like 1
Perseus Enthusiast

Perseus

Posted
Posted

Not the best, but at least it's not in the driveway. I love the final product.

 

9b33d60907503869567497bb2c315723.jpg

 

Sent from my Nexus 5 using Tapatalk

820.jpeg

  • Like 2
Frecks10 Enthusiast

Frecks10

Posted
Posted

anyone here running a Toyo 33x12.5/20r open country m/t with just a 2.25 level? I ordered my rims recently and trying to size the biggest tire i can squeeze on. Rims have a +20 offset so pretty close to stock.

Lgetz Senior Enthusiast

Lgetz

Posted
Posted

anyone here running a Toyo 33x12.5/20r open country m/t with just a 2.25 level? I ordered my rims recently and trying to size the biggest tire i can squeeze on. Rims have a +20 offset so pretty close to stock.

 

Haven't put on tires on the 15 yet but have seen trucks with a 2 inch level running 33's on stock wheels. I think you should be fine with that offset with a 9 inch wide wheel on your truck.

Frecks10 Enthusiast

Frecks10

Posted
Posted

Haven't put on tires on the 15 yet but have seen trucks with a 2 inch level running 33's on stock wheels. I think you should be fine with that offset with a 9 inch wide wheel on your truck.

I thought so to as the level kit states you can run a 33" but says a 11.5 max, I want to avoid rubbing at all cost.

A.J._Langholff Enthusiast

A.J._Langholff

Posted
Posted

I just put on a 2 inch RC level on my 15 crew cab happy with it so far about 500 miles on it. For those guys who have 2014 & have had them on for a while is there any negative impact that come directly from having it leveled? Just curious if I should be worried?

 

Sent from my SM-N920R4 using Tapatalk

VinnyZ17 Enthusiast

VinnyZ17

Posted
Posted

anyone here running a Toyo 33x12.5/20r open country m/t with just a 2.25 level? I ordered my rims recently and trying to size the biggest tire i can squeeze on. Rims have a +20 offset so pretty close to stock.

Haven't put on tires on the 15 yet but have seen trucks with a 2 inch level running 33's on stock wheels. I think you should be fine with that offset with a 9 inch wide wheel on your truck.

I thought so to as the level kit states you can run a 33" but says a 11.5 max, I want to avoid rubbing at all cost.

 

I think Laura Buick GMC puts +1 offset 20x9 rims on the trucks that they level with the 2.25in level and run 33x12.5 at tires. I have also seen ppl on here running 295/55/20 (33x12.2) mts on stock rims with 2 or 2.5 levels with no rubbing. With +20 you're gunna be cutting it close.

danno85 Enthusiast

danno85

Posted
Posted

For those with the moto fab 2" level, did it give exactly 2" of lift. Also, where can the top 1/2" spacers be purchased?

 

 

I put on the 2" Level with the 1/2" top spacer this last weekend. It worked out to be a little greater than 2.5" of lift, nearly 3" to the bottom of the fender in the front. I have a '16 CC Sierra with factory wheels, and it currently sits close to level, but back is nearly 3/8"-1/2" higher.

 

One thing to note is that the front end on mine looks a little bit higher in the front because of the profile of the hood compared to the box, so it depends on your goal for the truck. If you're going for looks you may want to go with a 2" leveling kit, but if you're going for tires and want to have more clearance you may want to go with the 2.5" lift.

 

I didn't add anything to the rear yet, I wanted to try the front first and see how that changed things.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • StingerZ16
      Roll up bed cover experiences

      By StingerZ16 · Posted

      I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • asilverblazer
      2027 GMC Sierra: Official Discussion

      By asilverblazer · Posted

      Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...