Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

Michael71009 Enthusiast

Michael71009

Posted
Posted
Bilstein leveling shocks up front for more budget oriented or my preferred billet aluminum front 2.25” top and lower strut mounts plus a 1” in rear. I prefer the aluminum billet spacers from 4wheelparts and then later buy Bilstein front and rear 5100’s. Reason I don’t like the leveling shock is cause you’re screwed if it goes out on you with larger tires but you’d be fine if the shock went out on you with installed billet aluminum spacers, just get new shocks. You’ve got the 14 model which doesn’t have the cursed new stamped steel UCA’s (upper control arms) that cause your tires to rub them.  
 
Sent from my iPhone using Tapatalk
 
Question on the bilsteins, I just ordered a front set last night to level my 14 gmc. Would you happen to know exactly how much "lift" I will get off of those alone? Will just the struts be enough or should I get a set of spacers and even out the lift by setting the struts on the middle height with the added spacers?


Sent from my SM-N950U using Tapatalk

  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
Question on the bilsteins, I just ordered a front set last night to level my 14 gmc. Would you happen to know exactly how much "lift" I will get off of those alone? Will just the struts be enough or should I get a set of spacers and even out the lift by setting the struts on the middle height with the added spacers?


Sent from my SM-N950U using Tapatalk


It’s one or the other, never both. Max setting I believe is 2” - 2.25”. Just remember that mid 2015-2018 GM switched to stamp steel UCA’s which will definitely cause tire rubbing if you go to 33” tires. Leveling these year trucks with bigger tires requires new offset wheels too. Bora makes the best spacers but being your truck is new your warranty will be affected by spacers as soon as the dealer spots them. Funny thing is I heard you can go 33” without level and not rub. I’d recommend leaving it alone with just level and go from there, save up and get some nice +1 or 0 offset wheel and tire package.


Sent from my iPhone using Tapatalk
Michael71009 Enthusiast

Michael71009

Posted
Posted




It’s one or the other, never both. Max setting I believe is 2” - 2.25”. Just remember that mid 2015-2018 GM switched to stamp steel UCA’s which will definitely cause tire rubbing if you go to 33” tires. Leveling these year trucks with bigger tires requires new offset wheels too. Bora makes the best spacers but being your truck is new your warranty will be affected by spacers as soon as the dealer spots them. Funny thing is I heard you can go 33” without level and not rub. I’d recommend leaving it alone with just level and go from there, save up and get some nice +1 or 0 offset wheel and tire package.


Sent from my iPhone using Tapatalk


Never both, what's the reasoning? In theory wouldn't the 5100s be basically the same as as your standard strut just with the ability to adjust the height? I'm unexperienced when it comes to suspension systems. Tire size isn't really my main concern, I just like and prefer the true level look. I have run spacers on a previous truck and the ride quality went to hell after. My truck sits like a 2wd and rides like a boat with the ranchos. I've heard alot of good about the bilsteins planting the truck to the ground and helping with body roll in corners. My 14 has the cast ucas but I'm planning on switching out for the cognito ucas here soon. I would just like to get my level situation figured out first. c00d58d6b42c4429c90cbd33dca0ba51.jpg

Sent from my SM-N950U using Tapatalk

Daly Senior Enthusiast

Daly

Posted
Posted

You can use the 5100s with a leveling kit, as long as the two don't exceed 2.5". Anything over that is too much angle for the suspension and CV shafts. Max lift from the 5100s is 1.85", according to bilstein. I ran 5100s set at the highest with a 1/4" home made space and it was fine. Gave me about 2 3/8" lift. 

  • Like 1
spenpet Enthusiast

spenpet

Posted
Posted
17 hours ago, SNAFU88 said:

It does BUT the top of the hood line is higher than the top of the bed line and it creates the illusion that the truck is nose high.  Especially when the truck is on even a very slight incline.   

to each their own.  I was just stating facts.

  • Like 1
SNAFU88 Enthusiast

SNAFU88

Posted
Posted
17 hours ago, Tyy1907 said:

What brandc2" block did u go with?

No vibrations?

Rough Country blocks.

 

Only driven around town so far and it feels no different.  Going to get on the highway this weekend and test it out at high speeds.  

Michael71009 Enthusiast

Michael71009

Posted
Posted



You can use the 5100s with a leveling kit, as long as the two don't exceed 2.5". Anything over that is too much angle for the suspension and CV shafts. Max lift from the 5100s is 1.85", according to bilstein. I ran 5100s set at the highest with a 1/4" home made space and it was fine. Gave me about 2 3/8" lift. 


As far as to much angle, what is the difference in buying the diff drop kit and new ucas if I wanted to raise over the 2.5" mark. Isn't that basically all the comes with a legit lift kit? (The smaller ones that is) The diff drop kit is 30 bucks from American trucks.
And my question about the spacer with the bilsteins, if the shocks wasn't set on the max lift wouldn't it ride a little better than being maxd out?

Sent from my SM-N950U using Tapatalk

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted





Never both, what's the reasoning? In theory wouldn't the 5100s be basically the same as as your standard strut just with the ability to adjust the height? I'm unexperienced when it comes to suspension systems. Tire size isn't really my main concern, I just like and prefer the true level look. I have run spacers on a previous truck and the ride quality went to hell after. My truck sits like a 2wd and rides like a boat with the ranchos. I've heard alot of good about the bilsteins planting the truck to the ground and helping with body roll in corners. My 14 has the cast ucas but I'm planning on switching out for the cognito ucas here soon. I would just like to get my level situation figured out first. c00d58d6b42c4429c90cbd33dca0ba51.jpg

Sent from my SM-N950U using Tapatalk



No worries, never do both, it’s one or the other and you should not go past 2.5” height, if you do you’ll put an enormous amount of stress on your UCA’s do to the angle and destroy your front suspension. Call the experts at 4wheelparts and ask them for a professional answer, if you want to get higher do a lift kit which is designed to lift without creating chaos on your suspension and comes with a differential drop kit too.


Sent from my iPhone using Tapatalk
  • Like 1
TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
Anyone using the BDS leveling kit?  On their website they claim the it doesn't effect the suspension angles negatively. Is this true?


It must come with UCA’s and hopefully a diff drop if it’s over 2.5”-3”+


Sent from my iPhone using Tapatalk
dougwtx Enthusiast

dougwtx

Posted
Posted
1 hour ago, Clays_blue2014 said:

Anyone using the BDS leveling kit?  On their website they claim the it doesn't effect the suspension angles negatively. Is this true?

I had the 2" BDS leveling kit on my old 2015 lease with a Zone body lift.  I never experienced any issues with the kit although I only put 30k miles on it.  When I turned it in, there were no issues either with the dealer nor GM.

  • Thanks 1
Clays_blue2014 Enthusiast

Clays_blue2014

Posted
Posted
2 hours ago, TXGREEK said:

 


It must come with UCA’s and hopefully a diff drop if it’s over 2.5”-3”+


Sent from my iPhone using Tapatalk

 

It's 2" so wouldn't need UCA's correct?

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
It's 2" so wouldn't need UCA's correct?

You’re good, mine is a 2.25” and zero stress issues.


Sent from my iPhone using Tapatalk
  • Thanks 1
scagle777 Enthusiast

scagle777

Posted
Posted

I have a ‘14 4wd that I bought about a month ago. It appears to already have a leveling kit but there’s still a 2” difference with the front and rear. I’m wanting the truck to sit dead level. What size do I need for that? 2.25 or 2.5? Thanks

MBSierra17 Enthusiast

MBSierra17

Posted
Posted (edited)

Post pictures of your existing level. You can't stack levels. Odds are, with that much rake, you've got extra height in the rear as well. 

 

Options would be replace tall block with stock block in the rear, or replace the whole thing with a real lift. 

Edited by MBSierra17

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,948
    Total Members
    8,960
    Most Online
    zibzer2
    Newest Member
    zibzer2
    Joined

  • Who's Online   5 Members, 0 Anonymous, 839 Guests (See full list)

  • Latest Articles

  • Posts

    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
    • SoCal Angler
      Parking Brake - Automatic Engagement Questions

      By SoCal Angler · Posted

      2023 GMC 3500 HD, SLE, 6.6L Gas, 4x4, 6 Spd Options:  SLE Convenience Package; Driver Alert Package 1; Spray on Bedliner; X31 Off Road Package; TRAILERING MIRRORS, HEATED POWER -ADJUSTABLE, AUTO DIMMING, WITH TURN INDICATORS WHEELHOUSE LINERS, REAR INC. REAR AXLE - 3.73 RATIO INC. GVWR, 11,350 LBS. (5148 KG) INC. FRONT AND REAR PARK ASSIST, INC. ULTRASONIC     I have been launching my new boat and noticed some things related to the parking brake.. I usually set the parking brake (habit) when on flat ground for typical driving.    When backed down on the launch ramp to launch the boat and I place gear selector into Park, the parking brake activates automatically. My second nature is to set parking brake manually and noticed I was turing the parking brake off.  The parking brake appears to be setting itself automatically.   I looked all over my owner's manual and only found references to being on an incline and manually setting parking brake, or at times parking brake will be auto engaged, but nothing specific to my situation.    When is the parking brake automatically engaged?  Under what specific circumstances?  Can the auto set parameters be changed?     I like the auto set feature.  It would be nice if always engaged when shifted into Park and released when shifted out of Park (like my wifes 2025 RAV4).   Thanks!    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...