Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

Michael71009 Enthusiast

Michael71009

Posted
Posted
Bilstein leveling shocks up front for more budget oriented or my preferred billet aluminum front 2.25” top and lower strut mounts plus a 1” in rear. I prefer the aluminum billet spacers from 4wheelparts and then later buy Bilstein front and rear 5100’s. Reason I don’t like the leveling shock is cause you’re screwed if it goes out on you with larger tires but you’d be fine if the shock went out on you with installed billet aluminum spacers, just get new shocks. You’ve got the 14 model which doesn’t have the cursed new stamped steel UCA’s (upper control arms) that cause your tires to rub them.  
 
Sent from my iPhone using Tapatalk
 
Question on the bilsteins, I just ordered a front set last night to level my 14 gmc. Would you happen to know exactly how much "lift" I will get off of those alone? Will just the struts be enough or should I get a set of spacers and even out the lift by setting the struts on the middle height with the added spacers?


Sent from my SM-N950U using Tapatalk

  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
Question on the bilsteins, I just ordered a front set last night to level my 14 gmc. Would you happen to know exactly how much "lift" I will get off of those alone? Will just the struts be enough or should I get a set of spacers and even out the lift by setting the struts on the middle height with the added spacers?


Sent from my SM-N950U using Tapatalk


It’s one or the other, never both. Max setting I believe is 2” - 2.25”. Just remember that mid 2015-2018 GM switched to stamp steel UCA’s which will definitely cause tire rubbing if you go to 33” tires. Leveling these year trucks with bigger tires requires new offset wheels too. Bora makes the best spacers but being your truck is new your warranty will be affected by spacers as soon as the dealer spots them. Funny thing is I heard you can go 33” without level and not rub. I’d recommend leaving it alone with just level and go from there, save up and get some nice +1 or 0 offset wheel and tire package.


Sent from my iPhone using Tapatalk
Michael71009 Enthusiast

Michael71009

Posted
Posted




It’s one or the other, never both. Max setting I believe is 2” - 2.25”. Just remember that mid 2015-2018 GM switched to stamp steel UCA’s which will definitely cause tire rubbing if you go to 33” tires. Leveling these year trucks with bigger tires requires new offset wheels too. Bora makes the best spacers but being your truck is new your warranty will be affected by spacers as soon as the dealer spots them. Funny thing is I heard you can go 33” without level and not rub. I’d recommend leaving it alone with just level and go from there, save up and get some nice +1 or 0 offset wheel and tire package.


Sent from my iPhone using Tapatalk


Never both, what's the reasoning? In theory wouldn't the 5100s be basically the same as as your standard strut just with the ability to adjust the height? I'm unexperienced when it comes to suspension systems. Tire size isn't really my main concern, I just like and prefer the true level look. I have run spacers on a previous truck and the ride quality went to hell after. My truck sits like a 2wd and rides like a boat with the ranchos. I've heard alot of good about the bilsteins planting the truck to the ground and helping with body roll in corners. My 14 has the cast ucas but I'm planning on switching out for the cognito ucas here soon. I would just like to get my level situation figured out first. c00d58d6b42c4429c90cbd33dca0ba51.jpg

Sent from my SM-N950U using Tapatalk

Daly Senior Enthusiast

Daly

Posted
Posted

You can use the 5100s with a leveling kit, as long as the two don't exceed 2.5". Anything over that is too much angle for the suspension and CV shafts. Max lift from the 5100s is 1.85", according to bilstein. I ran 5100s set at the highest with a 1/4" home made space and it was fine. Gave me about 2 3/8" lift. 

  • Like 1
spenpet Enthusiast

spenpet

Posted
Posted
17 hours ago, SNAFU88 said:

It does BUT the top of the hood line is higher than the top of the bed line and it creates the illusion that the truck is nose high.  Especially when the truck is on even a very slight incline.   

to each their own.  I was just stating facts.

  • Like 1
SNAFU88 Enthusiast

SNAFU88

Posted
Posted
17 hours ago, Tyy1907 said:

What brandc2" block did u go with?

No vibrations?

Rough Country blocks.

 

Only driven around town so far and it feels no different.  Going to get on the highway this weekend and test it out at high speeds.  

Michael71009 Enthusiast

Michael71009

Posted
Posted



You can use the 5100s with a leveling kit, as long as the two don't exceed 2.5". Anything over that is too much angle for the suspension and CV shafts. Max lift from the 5100s is 1.85", according to bilstein. I ran 5100s set at the highest with a 1/4" home made space and it was fine. Gave me about 2 3/8" lift. 


As far as to much angle, what is the difference in buying the diff drop kit and new ucas if I wanted to raise over the 2.5" mark. Isn't that basically all the comes with a legit lift kit? (The smaller ones that is) The diff drop kit is 30 bucks from American trucks.
And my question about the spacer with the bilsteins, if the shocks wasn't set on the max lift wouldn't it ride a little better than being maxd out?

Sent from my SM-N950U using Tapatalk

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted





Never both, what's the reasoning? In theory wouldn't the 5100s be basically the same as as your standard strut just with the ability to adjust the height? I'm unexperienced when it comes to suspension systems. Tire size isn't really my main concern, I just like and prefer the true level look. I have run spacers on a previous truck and the ride quality went to hell after. My truck sits like a 2wd and rides like a boat with the ranchos. I've heard alot of good about the bilsteins planting the truck to the ground and helping with body roll in corners. My 14 has the cast ucas but I'm planning on switching out for the cognito ucas here soon. I would just like to get my level situation figured out first. c00d58d6b42c4429c90cbd33dca0ba51.jpg

Sent from my SM-N950U using Tapatalk



No worries, never do both, it’s one or the other and you should not go past 2.5” height, if you do you’ll put an enormous amount of stress on your UCA’s do to the angle and destroy your front suspension. Call the experts at 4wheelparts and ask them for a professional answer, if you want to get higher do a lift kit which is designed to lift without creating chaos on your suspension and comes with a differential drop kit too.


Sent from my iPhone using Tapatalk
  • Like 1
TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
Anyone using the BDS leveling kit?  On their website they claim the it doesn't effect the suspension angles negatively. Is this true?


It must come with UCA’s and hopefully a diff drop if it’s over 2.5”-3”+


Sent from my iPhone using Tapatalk
dougwtx Enthusiast

dougwtx

Posted
Posted
1 hour ago, Clays_blue2014 said:

Anyone using the BDS leveling kit?  On their website they claim the it doesn't effect the suspension angles negatively. Is this true?

I had the 2" BDS leveling kit on my old 2015 lease with a Zone body lift.  I never experienced any issues with the kit although I only put 30k miles on it.  When I turned it in, there were no issues either with the dealer nor GM.

  • Thanks 1
Clays_blue2014 Enthusiast

Clays_blue2014

Posted
Posted
2 hours ago, TXGREEK said:

 


It must come with UCA’s and hopefully a diff drop if it’s over 2.5”-3”+


Sent from my iPhone using Tapatalk

 

It's 2" so wouldn't need UCA's correct?

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
It's 2" so wouldn't need UCA's correct?

You’re good, mine is a 2.25” and zero stress issues.


Sent from my iPhone using Tapatalk
  • Thanks 1
scagle777 Enthusiast

scagle777

Posted
Posted

I have a ‘14 4wd that I bought about a month ago. It appears to already have a leveling kit but there’s still a 2” difference with the front and rear. I’m wanting the truck to sit dead level. What size do I need for that? 2.25 or 2.5? Thanks

MBSierra17 Enthusiast

MBSierra17

Posted
Posted (edited)

Post pictures of your existing level. You can't stack levels. Odds are, with that much rake, you've got extra height in the rear as well. 

 

Options would be replace tall block with stock block in the rear, or replace the whole thing with a real lift. 

Edited by MBSierra17

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Tommy 1960
      Magnetic ride struts

      By Tommy 1960 · Posted

    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      Well if you insist.
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      You have to have the last word. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I am sure that was quite the pass experience and not a great place to experience during the winter when the conditions are not good. I've seen video of that pass and also more detailed information and pictures about the wrecks at that one hair pin turn where tractor trailers have flown right off the cliff and I am sure from all the warning signs that you know the exact curve that was !. After all there is a reason why a song was made about Wolf Creek Pass !. By the way and I didn't realize this either when I bought my truck as its nothing I even thought of that would be programmed into the cruise control and this occurs in either the basic or the more advanced cruise that controls your distance behind a vehicle and that is the brakes going down a hill are being applied as soon as the vehicle goes a certain speed over the set cruise speed. While it certainly does force downshifts in the transmission as you found out with cruise on while going down hill, its also dragging the brakes as needed to keep the speed controlled to what the cruise was set to. For me, I find that unsettling simply because I have no concept then as to how MUCH brake input is being used a and just how hot are those brakes getting and the wear factor as well. I can see that system getting a person into trouble on long mountain grades while pulling a trailer as it would not only be standing on the brakes of the pickup without any driver input, it would also be automatically applying the trailer brakes and it could cause a run away unit by overheating the brakes. Its one thing on a shorter hill and if the driver allows it to do its thing but on a long mountain grade is where things could get so out of hand. As someone a while back on this forum said, they had someone following them at night I believe on a down grade and had the cruise set and the person behind them could see the brake lights being energized all the way down the hill. I figured when I saw your comment that you didn't know and would have no way of knowing that your truck was applying the brakes and that you would and rightfully so assume you only used the brakes when you pressed on the pedal to slow down more than the cruise set speed for the slower sharp curves. So its good knowledge to know this about the newer GM trucks, certainly when doing any descending on long mountain grades. In the future try kicking off the cruise and use the the manual mode on a pass to see what that is like as I know myself when I first experienced it I thought no way can this engine be holding me back this well and tried the same hill in manual mode and sure enough the engine was revving way up and still could not hold the trucks speed down like it could in cruise mode.    Fuel mileage, that is where a really low sleek type of car can do better at higher speeds, certainly it starts sucking fuel too but a tall pickup is pushing massive amounts of air and also allowing a lot more air under it and the tow mirrors as in elephant ears pushing through the wind  as well. Driving like grandpa is about as good as one can do when driving one of these if trying to get the best fuel economy they can. I bet these trucks would get the best mileage they can if driven on a freeway in Florida if not busy traffic at a sedate speed and that sea level elevation without hills, vastly different then Colorado !. 
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      It’s over for almost 24 hours. Are you playing Eddie Haskell? 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...