Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
I have a 2017 and have the ProComp 2.25" level. I ran it with the stock UCAs for about 20k miles without any issues. I got my 2017 in August of 2016 and none of the levels were offering replacement UCAs. I added cognito UCAs because I got them used for a good price. I'm not saying you wont have any issues but I'm not easy on my truck and the ball joints were fine when I took the stock UCAs out.

The ProComp kit is just a level and doesn't include a diff drop. It is the exact same kit as the Readylift 2.25" level just in a different box and costs less. Now Readylift is offering replacement UCAs with the kit. 7fdd87731ce40372b9d3b6d7ad7fbf8b.jpg

Sent from my SM-G950U using Tapatalk


I’ve got about 6k on my level, ordered Fox coilovers with resi’s, new Fabtech UCA’s and after lots of research, I cancelled my order and went with the 4.5” lift through CST Suspension. There are a few guys on the forum that got me turned on by it due to zero widening of the front wheel track unlike all the other brands and after many thousands of miles not one complaint. Leveling is fine for a clearing a bit larger tires but I noticed immediately after leveling with no larger tires that my truck rode rougher. This lift will put everything back but lift through spindles.


Sent from above
  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

ShubiSnax Enthusiast

ShubiSnax

Posted
Posted
9 hours ago, rudyb said:

I dig it. Any rub with this setup? Are you running stock UCA? Is that a 1.5" level? Thanks

Thanks! Bilstein 5100's(front on 3rd setting, rear is stock height). Stock UCA's. Bilstein claims this is a 1.25" lift in the front, but I have a feeling it was just a bit more.

I did get some rubbing on the factory mudflaps so I took a dremel and trimmed the insides just a bit. No rubbing now.

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
Just 2” and 285s stock wheels. Nothing drastic

 

 

Sent from my iPhone using Tapatalk

 

The interesting thing about people raving about leveling is they forget to mention from mid 2015 GM started using stamped steel UCA’s, causing your tires to rub onto your trucks frame and or UCA’s. Not trying to be negative about leveling but Doing a level, it caused me to spend thousands of dollars replacing stock wheels with new +1 offset and finally larger tires (no rubbing) at a cost of approximately $3K later. At least I’m half way done on what it costs to lift a truck lol!

 

This is only experienced with my 20” wheels and tires.

 

Also forgot to mention you’ll need new shocks too for the raised height preferably Bilstein 5100’s

 

Sent from above

 

Rad_Rado17 Enthusiast

Rad_Rado17

Posted
Posted
1 hour ago, TXGREEK said:


I’ve got about 6k on my level, ordered Fox coilovers with resi’s, new Fabtech UCA’s and after lots of research, I cancelled my order and went with the 4.5” lift through CST Suspension. There are a few guys on the forum that got me turned on by it due to zero widening of the front wheel track unlike all the other brands and after many thousands of miles not one complaint. Leveling is fine for a clearing a bit larger tires but I noticed immediately after leveling with no larger tires that my truck rode rougher. This lift will put everything back but lift through spindles.


Sent from above

I am in the same boat, I am currently looking into control arms or possibly doing the same CST lift too.  I don't want the headache down the road....

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
I am in the same boat, I am currently looking into control arms or possibly doing the same CST lift too.  I don't want the headache down the road....


Not worth the headaches, believe me. So much BS going on these forums with lies how some aren’t getting any rubbing with exact setup only to admit it soon after as “its not bad” lmao! Just spoke with the shop, haven’t received it yet from CST. I’m looking at first part of next week for install, arg!


Sent from above
ducklawyer Enthusiast

ducklawyer

Posted
Posted
 The interesting thing about people raving about leveling is they forget to mention from mid 2015 GM started using stamped steel UCA’s, causing your tires to rub onto your trucks frame and or UCA’s. Not trying to be negative about leveling but Doing a level, it caused me to spend thousands of dollars replacing stock wheels with new +1 offset and finally larger tires (no rubbing) at a cost of approximately $3K later. At least I’m half way done on what it costs to lift a truck lol!
 
This is only experienced with my 20” wheels and tires.
 
Also forgot to mention you’ll need new shocks too for the raised height preferably Bilstein 5100’s
 
Sent from above
 

Can’t imagine I’ll rub with the 285s. 32.5x11.5 should clear with 2”. I’ll report this afternoon. As far as the shocks go I’ll let it ride. Had same setup on my 14 (with 285/55 ko2s) and never thought it rode bad.
69705009de4abb2fe3659c98c2ac3629.jpg


Sent from my iPhone using Tapatalk
Sierra706 Senior Enthusiast

Sierra706

Posted
Posted
 
Running a procomp lift will included diff drop which doesn’t need new UCA’s cause with a diff drop your UCA’s will be fine for a while.
 
You should look at CST suspension, much better quality and doesn’t make your track widen up front like it does with all those knuckle replacement kits such as BDS, ProComp. A couple guy on this forum brought it up and I jumped on it.
 
 
Sent from above


A diff drop and UCAs are not related. Diff drop will help your CV joints return to a more stock angle. It will do nothing in regards to the upper ball joint which is the weak point of the stamped steel arms.


Sent from my iPhone using Tapatalk
  • Like 1
Rad_Rado17 Enthusiast

Rad_Rado17

Posted
Posted
22 minutes ago, TXGREEK said:

 


Not worth the headaches, believe me. So much BS going on these forums with lies how some aren’t getting any rubbing with exact setup only to admit it soon after as “its not bad” lmao! Just spoke with the shop, haven’t received it yet from CST. I’m looking at first part of next week for install, arg!


Sent from above

 

I hear ya..........I currently have a 3" level and am looking at control arms + a diff drop.  

 

can't wait to see pics once it's done.

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted


A diff drop and UCAs are not related. Diff drop will help your CV joints return to a more stock angle. It will do nothing in regards to the upper ball joint which is the weak point of the stamped steel arms.


Sent from my iPhone using Tapatalk


Speaking of my experience, after my 2.25” level was installed, the installer showed me that my UCA’s were not flat anymore, arched. Levels kill UCA’s!


Sent from above
pronstar Enthusiast

pronstar

Posted
Posted
 

Not trying to be negative about leveling but Doing a level, it caused me to spend thousands of dollars replacing stock wheels with new +1 offset and finally larger tires (no rubbing) at a cost of approximately $3K later. At least I’m half way done on what it costs to lift a truck lol!
 


It depends on the components selected.

It’s entirely possible to level a truck with new UCA’s, on stock wheels with larger tires, and get great ride quality.
  • Like 1
pronstar Enthusiast

pronstar

Posted
Posted

Can’t imagine I’ll rub with the 285s. 32.5x11.5 should clear with 2”. I’ll report this afternoon. As far as the shocks go I’ll let it ride. Had same setup on my 14 (with 285/55 ko2s) and never thought it rode bad.
69705009de4abb2fe3659c98c2ac3629.jpg


Sent from my iPhone using Tapatalk



You might get slight rub with 285’s depending on tire choice.

I get very slight rubbing at full lock with my 285
Nitto Trail Grappler MT’s on stock wheels.


Sent from my iPhone using Tapatalk Pro
TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted

Right after I did my level I installed 275/60/20 KO2’s and they rubbed bad! Went to a Fuel+18 and still rubbed but not as bad, Only thing that worked is current setup +1 offset 20X9’s with Nitto Ridge Grapplers 285/60/20’s


Sent from above

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted


It depends on the components selected.

It’s entirely possible to level a truck with new UCA’s, on stock wheels with larger tires, and get great ride quality.


Absolutely correct, the UCA’s play a big role in it.


Sent from above
TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted

 

 

You might get slight rub with 285’s depending on tire choice.

 

I get very slight rubbing at full lock with my 285

Nitto Trail Grappler MT’s on stock wheels.

 

 

Sent from my iPhone using Tapatalk Pro

My 275/60/20’s on stock 20’s rubbed bad and embarrassing especially in grocery store parking lots.

Leveling over 2.25” is a money pit.

 

Sent from above

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      The Peckish Synapse

      By Atlas · Posted

      There's some truth to the above, but also, she's selling fullsize trucks and bread/butter CUV's like hotcakes, meanwhile, extracting GM's pickups from the deep discounting sales game.   GM's stock has held its own during her tenure, and the more recent buybacks are delivering cash back to investors and signal confidence in their direction forward. Even with the EV losses.   GM is an example of a modern publicly traded company. The #1 goal of any publicly traded company is to deliver the most value possible to shareholders. Despite being a car company, building the best car isn't GM's path to delivering maximum shareholder value.   McDonalds doesn't make the best burger, or the best coffee.   I've mentioned in another thread, I really don't / won't ever understand Cadillac or Buick in a modern context. Both brands are completely dead to me. I'll cede that the Escalade is a nice SUV, but the brand and nameplate mean nothing to me, and GM will never persuade me to pay north of $170k for a gussied-up Tahoe or Burb. Other people don't mind doing that and that's their purview.   The C8 shares absolutely nothing in common with any other current Chevrolet or Corvette on the market. Since its introduction 8 years ago, it's developed quite the following. It did what other Corvettes couldn't do: reduce the average age of its buyer. GM has something there, and I see them investing in the car. They'd better not mess that up.   We've successfully derailed Grumpy's thread again, but I think this one is meant to be more of a random thought thread so a little wandering is probably OK.
    • Tyler Gibbs
      2027 GMC Sierra: Official Discussion

      By Tyler Gibbs · Posted

      Sliding doors ftw   Also, Sienna ftw as well.  The in-laws got a 2024-2025 recently when their 2019 sienna was totaled due to a deer back in June.  They've been getting 38-40mpg on the 65mph highway they live on.
    • xdieselmechanic
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By xdieselmechanic · Posted

      Forgot to mention that this started after changing the oil I use mobile 1 full syn with mobile one filter but I did add pro lube additive and was the first time doing so and is making me wonder just can't see why that would matter
    • xdieselmechanic
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By xdieselmechanic · Posted

      I apologize for long post put going to try to explain everything. Parts replaced so far: Cam sensor Crank sensor Cam phaser valve Cam phaser solenoid Fuel pump Maf 1 injector Pcm Pdm   So about 2 weeks ago coming off the highway my 2007 yukon xl with the 6.2 stalled and would restart. Had unit towed back to house and I messed around with relays and unit started. Drove it the next day and same thing. Had it towed again. Scanned unit and had code p0300 with misfire data showing mainly cylinder 7 but I know that won't cause a no start. Measure fuel pressure and found only 42 psi replaced pump to have unit stall again and not restart. This time I stayed on back roads and just waited for it to restart about 30 to 60 min. During this time I found I have no injector pulse but have good power at injectors. Started unplugging 1 injector at a time and found when unplugging cylinder 7 pulse came back so i changed injecto and same issue. Turns out unit just happen to ready to start at that time. Scanned into unit and found no reason for the pcm to take away injector pulse so I replaced the pcm and same issue. I figured timing sesnor controlled the injector pulse so I replaced both sensors and while I had the water pump of i replaced the vvt components while i was in there. Read multiple people have luck chaging the maf for this issue so I changed it. Unit still stalls to this day and loses injector pulse on the ground side when it does. Have noticed watching the live data the pcm is request injectors to fire via injector pwm value. I have redone the ground wires at the left bottom of the block knowing this was the ground location for the pcm but still no luck. I am a mechanic by trade but this is having me pull my hair out. If anyone has something to have me check I will gladly im not much of a parts thrower but im about to load the cannon
    • newdude
      auto mechanical driver's door unlock without pressing button? [2026 Silv. 1500 WT 4WD RC SB 2.7L]

      By newdude · Posted

      Actually.  Wait.   I just re-read your original post.  Are you talking from INSIDE the truck you have to hit unlock?  Or from the key fob?  I had assumed from the key fob.   IF you are talking the inside unlock button, I assume you are shifting to park and its not unlocking the doors?  If so, that is changed via the settings page in the radio.  Go to SETTINGS, then VEHICLE and then it should be under LOCKS or DOOR LOCKS or something like that.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...