Jump to content

Recommended Posts

Posted (edited)

I'm finally ready to level my truck out but wanted some info before I do. 

My truck is a 2018 gmc sierra z71 SLT 4x4.

 

I was quoted $350 for a ready lift 2.5 level kit. 

I want to use my stock wheels which are the 22x9 denali wheels and want to wrap them in some toyo at3 33x12.5r22 or nitto ridge grapplers in the same size. Will I have issues or is this setup good to go?

Edited by MANDINGO
Posted
32 minutes ago, MANDINGO said:

I'm finally ready to level my truck out but wanted some info before I do. 

My truck is a 2018 gmc sierra z71 SLT 4x4.

 

I was quoted $350 for a ready lift 2.5 level kit. 

I want to use my stock wheels which are the 22x9 denali wheels and want to wrap them in some toyo at3 33x12.5r22 or nitto ridge grapplers in the same size. Will I have issues or is this setup good to go?

You should be fine with that setup if you go with their upper control arms as well. If not the tires will rub the stamped steel stock upper control arms, any thing above stock size will rub. I have the same setup and I have their upper control arms, Stock size was 275/55/20, I wanted to run 275/60/20 which are 33s basically, just a little narrower. I did a ton of research and if you have the stamped steel upper control arms which most 2017s and 2018s have you need to change upper control arms. I have no complaints whatsoever with this set up, rides and drives great, I ran the 275/60/20s for a year no issues, just upgraded to 33x1250x20s today and no issues even with my new 20x10s. 22x9 with 33s will fit no problem with 2.25 level.

Posted

Installed my readylift 2.25" level and new upper control arms yesterday. Was fairly easy and I'm really happy with the new look. 

 

My new wheels are waiting in the garage for my tires to come in some time this week. Ordered 285/70/17 Duratracs. 

 

50104781546_635e6207cc_b.jpg20200711_092719 by Rob Malaguti, on Flickr

 

50104781081_4c24d95456_b.jpg20200711_210050 by Rob Malaguti, on Flickr

 

50104780526_5e9dc631b0_b.jpg20200711_210007 by Rob Malaguti, on Flickr

  • Like 1
Posted
4 hours ago, Robear15 said:

Installed my readylift 2.25" level and new upper control arms yesterday. Was fairly easy and I'm really happy with the new look. 

 

My new wheels are waiting in the garage for my tires to come in some time this week. Ordered 285/70/17 Duratracs. 

 

50104781546_635e6207cc_b.jpg20200711_092719 by Rob Malaguti, on Flickr

 

50104781081_4c24d95456_b.jpg20200711_210050 by Rob Malaguti, on Flickr

 

50104780526_5e9dc631b0_b.jpg20200711_210007 by Rob Malaguti, on Flickr

Nice which wheels and tires are you throwing on?

Posted
1 hour ago, MANDINGO said:

Nice which wheels and tires are you throwing on?

17 x 9 RTX Baja wheels with 0 offset (basically black method race wheel look -a-likes) and 285/70/17 Goodyear Wrangler Duratracs. 

  • Like 1
Posted

I’m running a 2” under strut level. Has anyone ran Bilsteins on top of that? I want to run them on a lower setting to get it a little closer to level. 

C4A5414D-D6C9-429A-B814-EB44B09A431E.jpeg

B7A0A2E8-31A3-4FD9-83FD-BFA915D28715.jpeg

Posted
2017
2.25 Ready Lift
Zone add a leaf
285/60r20 Norcal Mod No Rubf1af57ab65756cf07d6475246bf15f22.jpgd805de75c0f2e7e4f1866c78e73db6a1.jpg

Sent from my SM-G960U using Tapatalk


Nice! What's your wheel/offset? Got any stance pics?

Thanks!
Jon

Sent from my Pixel 4 XL using Tapatalk

Posted
Nice! What's your wheel/offset? Got any stance pics?

Thanks!
Jon

Sent from my Pixel 4 XL using Tapatalk

Thanks Jon. The wheels are Black Rhino Kruger 20x9 0mm offset. I will share a few more pictures later this afternoon.

Sent from my SM-G960U using Tapatalk

  • Like 1
Posted
I’m running a 2” under strut level. Has anyone ran Bilsteins on top of that? I want to run them on a lower setting to get it a little closer to level. 
C4A5414D-D6C9-429A-B814-EB44B09A431E.thumb.jpeg.b34d1b4bb96c31ee9be808baf69b783e.jpeg
B7A0A2E8-31A3-4FD9-83FD-BFA915D28715.thumb.jpeg.7513f356ba9f110893a9d0979aceba04.jpeg

What size tires are you running? I wouldn’t run a stacked level (spacer + bilsteins)


Sent from my iPhone using Tapatalk
Posted
1 hour ago, jgraves13 said:


What size tires are you running? I wouldn’t run a stacked level (spacer + bilsteins)


Sent from my iPhone using Tapatalk

275/70/18. Would you recommend going for 3.5” lift instead?

Posted
275/70/18. Would you recommend going for 3.5” lift instead?

No those are basically a stacked leveling kit labeled as a lift kit. You’re either stuck at 2.5” with a leveling kit, or jump up to a drop bracket 4-4.5” kit (zone, cst, bds, etc)

 

Are you 4wd or 2wd?

 

 

Sent from my iPhone using Tapatalk

Posted
11 minutes ago, jgraves13 said:

No those are basically a stacked leveling kit labeled as a lift kit. You’re either stuck at 2.5” with a leveling kit, or jump up to a drop bracket 4-4.5” kit (zone, cst, bds, etc)

 

Are you 4wd or 2wd?

 

 

Sent from my iPhone using Tapatalk

 

I did not know that, thank you. I’ll probably just swap out the spacer and run Bilsteins. 
 

I’m 4wd it’s 2016 LT z71

Posted

I did not know that, thank you. I’ll probably just swap out the spacer and run Bilsteins. 
 

I’m 4wd it’s 2016 LT z71


Yea with 4wd not many options to “do it right”.


Sent from my iPhone using Tapatalk
Posted
6 hours ago, jgraves13 said:


What size tires are you running? I wouldn’t run a stacked level (spacer + bilsteins)


Sent from my iPhone using Tapatalk

I run Bilstein 5100s with a 2" Rugged Off Road spacer, but I left the shocks at the factory level and did not raise them using any of the notches.   

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...