Jump to content

Center console swap?

quickvert1

By quickvert1
in Modifications & Accessories

 Share

Recommended Posts

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

darkfox1
darkfox1

OK.. mine's in.   Here's a writeup, cos I haven't seen one so far.   1. remove the "ash tray" and cig. ligther in your dash with 3 t-10 torx screws, and 2 clips. 2. Remove the radio trim, clips i

dla
dla

I always wanted a RCSB with buckets and a center console...   Received and installed mine yesterday. Very straight forward, thanks for all who posted instructions and part numbers.   Possibly to h

o7bodybagged
o7bodybagged

Finally the console is complete now ready for the install and see what other problems I run into

Posted Images

Osirus Enthusiast

Osirus

Posted
Posted
On ‎9‎/‎8‎/‎2018 at 1:46 PM, Osirus said:

 

This means I should be able to run:

 

HMI -> Front Console Hub (Green to Grey cable)

HMI -> Inner Console Hub (Black to Brown cable)

Front Console Hub -> Glove Compartment Port (generic Mini USB extension cable) https://www.amazon.com/gp/product/B015HKPDAE?pf_rd_p=d1f45e03-8b73-4c9a-9beb-4819111bef9a&pf_rd_r=HJVW9D9NJGNQETAPW9T4

 

 

 

Update:

 

I finally got a case of the not-lazys long enough to try this. I rearranged my setup as described above and am happy to say that (for the moment) everything is now working. All USB ports play media as well as AUX.

 

At first AUX didn't work. This port seems really touchy. It kept saying no other devices connected. I was testing it with a little Sandisk MP3 player. I finally swapped it out for my phone and then it started playing. I later swapped the Sandisk player back and it worked, too. I don't know what the sensitivity is for detecting the input. I doubt I'll ever really want to use it, anyway.

  • Like 1
  • 2 weeks later...
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
[mention=159655]pgamboa[/mention], any updates on when that shop you're working with will be resuming business? I'll be looking to do the center console swap in the next month or two.

Still working on it. I am working with another supplier and trying to get the best price possible to pass on the savings. Also, note that there are a TON of options for things like trim. So we are working on the most common type of console requests.

Hoping by next week... I should have something.


Sent from my iPhone using Tapatalk
RoflCopter726 Enthusiast

RoflCopter726

Posted
Posted
17 hours ago, pgamboa said:


Still working on it. I am working with another supplier and trying to get the best price possible to pass on the savings. Also, note that there are a TON of options for things like trim. So we are working on the most common type of console requests.

Hoping by next week... I should have something.


Sent from my iPhone using Tapatalk

Sounds great, I will get with you soon to order your harness once you hear something.

  • 1 month later...
CoryMcCarty Enthusiast

CoryMcCarty

Posted
Posted
On 6/15/2018 at 12:35 PM, Hubbstx said:

mitchell95: I just finished my swap. Ordered all partsfrom Corbin with gmpartsnow.com. I spent hours researching prices and they were by far the cheapest to the door. I have a 2018 Silverado Crew with black interior w/silver stiching.

84288040-Console $390.79
84092079-Upper Trim Panel $146.57
22467516-Side Trim $52.96
23467516-Side Trim $25.30
22776807-Front Bracket $16.58
84022323-Cable $16.46
19119050-Cable $24.13
11609982-Bolt x 2 $3.26ea

Total $680.31

10% Discount -$67.93

Shipping to my location $54.53

Grand Total $665.91

You will also need the wire harness from pgamboa he will hook you up...

Hope this helps

c815ba6e3dbc944594b470e3bc2388ec.jpg

Sent from my SM-G935V using Tapatalk
 

how’d you get the 10% discount? 

johnhankel Enthusiast

johnhankel

Posted
Posted

Looking at 2018 LT Z71 trucks now.   One question that maybe someone can answer.  Has anyone looked at adding a 2 port USB like on the front of the console to the rear opposite of the 12v plug?  See the picture... Would not have to have the full connectivity, just charging...  I will be putting a console in a new truck if I do not get one with it...

 

charger.jpg

  • Like 1
Ravenkeeper Senior Enthusiast

Ravenkeeper

Posted
Posted
1 hour ago, johnhankel said:

Looking at 2018 LT Z71 trucks now.   One question that maybe someone can answer.  Has anyone looked at adding a 2 port USB like on the front of the console to the rear opposite of the 12v plug?  See the picture... Would not have to have the full connectivity, just charging...  I will be putting a console in a new truck if I do not get one with it...

 

charger.jpg

Looking at doing that to mine.  Actually, looking at (already have the parts for) replacing the DC outlet with a tandem USB outlet and a slave set on the other side, power only on both sides.

  • Like 1
SSam Enthusiast

SSam

Posted
Posted

I have a question the consoles I hope someone can help with.  Trying to avoid ordering a replacement console that doesn't work/match.  I have the top and side trim pieces so no worry there.

The situation:  My 2017 Sierra 1500 SLT came with a factory center console.  The console was destroyed when someone decided they wanted the console vault that was in it.

Dealership told me I need GM part # 84199890 replacement console to replace with the black interior with white/silver stitching.   I would love to get the wireless charging to work as part of this ordeal.  Reading through the threads, looks like GM part # 84288040 is from the 2018, and the wireless charging works.  Anyone know if this console is compatible with a 2017 truck?

I attached a picture of the connector from my original console if that helps. 

Also, pgamboa, happy to donate my original harness to you after I get a new console if it helps your services.

 

Thanks in advance for any help,

-SSam  

 

IMG_4023 (1).JPG

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
I have a question the consoles I hope someone can help with.  Trying to avoid ordering a replacement console that doesn't work/match.  I have the top and side trim pieces so no worry there.
The situation:  My 2017 Sierra 1500 SLT came with a factory center console.  The console was destroyed when someone decided they wanted the console vault that was in it.
Dealership told me I need GM part # 84199890 replacement console to replace with the black interior with white/silver stitching.   I would love to get the wireless charging to work as part of this ordeal.  Reading through the threads, looks like GM part # 84288040 is from the 2018, and the wireless charging works.  Anyone know if this console is compatible with a 2017 truck?
I attached a picture of the connector from my original console if that helps. 
Also, pgamboa, happy to donate my original harness to you after I get a new console if it helps your services.
 
Thanks in advance for any help,
-SSam  
 
5c232cb0a8b83_IMG_4023(1).thumb.JPG.89181ca418ffde33986e48bd9406e1c0.JPG


These are confirmed to have the 2018 charging lid and white stitching.

84288042 - Console (Black with black lid handle)
84288045 - Console (Black with chrome handle)


Sent from my iPhone using Tapatalk
MHPrior80 Enthusiast

MHPrior80

Posted
Posted
17 hours ago, johnhankel said:

Looking at 2018 LT Z71 trucks now.   One question that maybe someone can answer.  Has anyone looked at adding a 2 port USB like on the front of the console to the rear opposite of the 12v plug?  See the picture... Would not have to have the full connectivity, just charging...  I will be putting a console in a new truck if I do not get one with it...

 

charger.jpg

Ha! That’s funny using my pic to ask that. Seems like a good idea though for passengers to use 

  • Like 2
Qualitechcomputer Enthusiast

Qualitechcomputer

Posted
Posted
On ‎12‎/‎26‎/‎2018 at 10:56 AM, pgamboa said:

 


These are confirmed to have the 2018 charging lid and white stitching.

84288042 - Console (Black with black lid handle)
84288045 - Console (Black with chrome handle)


Sent from my iPhone using Tapatalk

 

Hey Phil,

 

The 84288042 is backordered all over with no ETA. Is the only difference between the 8042 and 8045 the chrome handle? Do you know if the 8045 will fit a Silverado?

 

Thanks,

Jim

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Hey Phil,
 
The 84288042 is backordered all over with no ETA. Is the only difference between the 8042 and 8045 the chrome handle? Do you know if the 8045 will fit a Silverado?
 
Thanks,
Jim

Yes.


Sent from my iPhone using Tapatalk
Qualitechcomputer Enthusiast

Qualitechcomputer

Posted
Posted
26 minutes ago, pgamboa said:


Yes.


Sent from my iPhone using Tapatalk

FYI...8045 is backordered everywhere as well. I'll just have to wait it out.

 

Jim

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   7 Members, 0 Anonymous, 1,139 Guests (See full list)

  • Latest Articles

  • Posts

    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...