Post your 2014+ wheel/tire set-up

[Pezman38]

2.5" RC Leveling Kit and 275/65R20 Goodyear Duratracs. The tires rubbed just slightly on the fender liner, a couple zip ties solved that. Thx Mr. Drag Sledder for the tips.

 

 

[Guilty]

2.25 Ready Lift with 295/55-20 Nitto Trail Grapplers

 

[Tim99GT]

2.25 Ready Lift with 295/55-20 Nitto Trail Grapplers

 

What is the wheel offset? Do the tires/wheels stick out at all? Any rub anywhere?

[Guilty]

What is the wheel offset? Do the tires/wheels stick out at all? Any rub anywhere?

 

20x9 with +18mm offset - don't stick out and no rubbing

[Newm]

2.25 Ready Lift with 295/55-20 Nitto Trail Grapplers

 

Now that looks right..nice truck.

[dobdabomb]

I wanted to make sure everyone got my setup on here as well.

 

2 1/2 RC level kit w/ 2" spacer in the rear, 295/55/20 Toyo AT2 Xtreme w/ 14' All-Terrain stock rims on my Denali. The front's rub a little, looking at adding .25 inch spacers in the front. Has anyone done this, will it stop the rubbing? I sent an email to RC and they said that "should" work but obviously would like to talk to someone that has attempted it. The offset is supposedly a +34 for the stock AT's so that looks to be the problem not the tires. Do you need to put spacers on all 4 tires to make sure they ride the same for alighment/tire wear....etc?

[MR. DRAG SLEDDER]

2.5" RC Leveling Kit and 275/65R20 Goodyear Duratracs. The tires rubbed just slightly on the fender liner, a couple zip ties solved that. Thx Mr. Drag Sledder for the tips.

 

 

Looks GREAT!!!

[jmayovsky]

Just thought I would contribute...6" Fabtech lift. Federal Couragia M/T 35x12.5 on 18" Black Rhino alloys :-)

 

[14sierra4x4]

275/70/18 cooper st maxx on 18x9 0 offset moto metal 962

 

 

Sent from my SAMSUNG-SGH-I747 using Tapatalk

[baggedlvintegra]

2.5" Level + 1.5" Body Lift

20x10 ET -24 Moto Metal MO970

33x12.50R20 Federal Couragia M/Ts

No Rubbing / No Trimming

 

 

 

 

 

[soltys]

 

 

 

 

 

 

 

Noticing a couple of "performance check" marks here. What that the send-off of your factory rubber? I know that's how mine want to go out.

[SlavO]

That's so nice!!!!! Bagge well done Sir

[GTALLDAY]

2.5" Level + 1.5" Body Lift

20x10 ET -24 Moto Metal MO970

33x12.50R20 Federal Couragia M/Ts

No Rubbing / No Trimming

 

 

 

 

 

Are these a - 24 offset and which lift kit did you go with. I also want 20x10's on either 295 or 305 but I ordered the 20x9 and 295's with a rough country 4 3/4 combo lift kit. Seems like a big difference between a +18 & - 24 offset. Haven't installed anything yet. Thanks for your reply!

 

 

 

Sent from my SCH-I545 using Tapatalk

Edited June 20, 2014 by GTALLDAY

[loso.watts.3]

2014 double cab with stock 20inchs

 

 

 

 

 

Sent from my iPhone using Tapatalk

[KUUG]

2.5" Level + 1.5" Body Lift

20x10 ET -24 Moto Metal MO970

33x12.50R20 Federal Couragia M/Ts

No Rubbing / No Trimming

 

 

 

 

 

 

 

 

 

Those wheels look good on your truck. This is the best set up you've had by far. Keep it up!