Jump to content

Recommended Posts

Posted
On 3/3/2021 at 4:21 PM, swoleymammoth said:

What prices are you guys paying for a full set front/rear of bilstein 5100s? I’m seeing prices from $380 to $450. Also how much should I expect to pay to have the fronts installed? 

Just ordered mine this week and got them yesterday.  They were $400, shipping was free.  I plan on putting them on after April 1st when I can drive my Camaros again. 

  • 4 weeks later...
Posted (edited)
On 12/11/2020 at 9:43 PM, 14LTZ-1LZ said:

 

 

Edited by 14LTZ-1LZ
  • 5 weeks later...
Posted

I can't find the 5100 fronts in stock ANYWHERE.  I also can't figure out where people are finding these for $350- for the set of 4. Best price I can find that is out of stock is $94 each for the rears and $132 each for the fronts.

Posted (edited)
2 hours ago, Chris Stierman said:

I can't find the 5100 fronts in stock ANYWHERE.  I also can't figure out where people are finding these for $350- for the set of 4. Best price I can find that is out of stock is $94 each for the rears and $132 each for the fronts.

Yeah, when I was in the process of swapping my Ranchos this past Fall (this was early Sept.) I went to my nearby 4x4 place to have them ordered (5100s OR 4600s) and Bilstein basically told the guy they would not be in for two months. Flash forward to late November and he was only able to find 3 4600s (Both rears, one front) from nearby suppliers. I told him to get them and I would do my best to find the last one, and thank god there was one left on Amazon.

Man those things were a pain to find. They were totally worth the effort though! It's crazy that this is still going on.

Edited by OffTheAir
Posted

I would think it be easier for older gens....I found em for newer gen fairly easily......bilstein lifts

Posted
On 2/15/2021 at 6:30 PM, ducklawyer said:

Just did the 4600s on my 96 and made a world of difference. Maybe bc the originals were 21yrs old!! Either way will be adding the 5100s to my 18 Silverado soon.


Sent from my iPhone using Tapatalk

63494627784__9C008DA0-EB7E-4C97-BC52-6C2E1613D1E1.jpgIMG_1565.jpgIMG_1527.jpg

I bought my k2xx after my ‘97 tahoe caught on fire

 

i wish they still road like that. There was no balance of handling and ride comfort, it was only ride comfort. I doubt there is a car on the road today with as soft and comfortable suspension.

 

i didnt realize how good it was when i owned it honestly.

 

90’s american boats will go down in history as the best riding cars ever built

  • Like 1
  • Thanks 1
Posted

I got my rears from Amazon.  Still trying to find a set of fronts somewhere.  I have a set ordered, but they are 2-6 weeks out.  Did the rears a few days ago.  My truck has 90K on it, has never towed before ever.  The factory shocks were completely shot.  Everyone should be changing these at 75K or earlier. 

182994122_10159261249141740_6879451371370980795_n.jpg

  • 3 weeks later...
Posted (edited)

2014 Silverado LTZ 4x4 Crew cab regular bed (6'6"). It was time to replace the shock at 100,000 miles, with all having a good review on the 5100 decided to replace the shock with them. Ordered from Amazon the rears came in first, installed them then waited until I had time for the front and need a spring compressor. The rear were about 2 in longer than the OEM shock. Did not think this would make a difference. The drive in town was improved, but on the Interstate on smooth road was quite and smooth. When you get to an inperfection on the road meaning not smooth or have little speed bumps. I get the worst trampoline effect the bigger the bumps the harsher the effect. 

    Installed the front at the lowest sitting thinking this would solve my problem, nope same result when going over the bumps. Going off road I have no problems with cause I expect these things, but on the highway its different. Raised it to its highest setting the 4 which leveled the pickup liked the look very much. An again this did not solve my problem. I have these on for about 22,000 miles and every time on the same stretch same result the trampoline effect.

   I also have clamp the leaf springs 5 in forward of the axle. This helped less trampoline effect. This make me think that I need to add a leaf to my rear springs.

      Has any body else have or had this problem? What did you do to fix it? Am giving these another 10,000 miles and going back to stock an just use blocks to level the truck or go with Eibach or another brand.

 

Thank you.

Edited by 14LTZ-1LZ
Posted

Hello,

 

Anyone think the Bilstein 6112 series shock would be to much for just a simple replacement over the original Rancho shocks? I do not plan on lifting the truck; just asking and researching what other people have done and are happy with.

 

Thanks,

 

Rob

 

Posted
22 hours ago, summitcounty99 said:

Hello,

 

Anyone think the Bilstein 6112 series shock would be to much for just a simple replacement over the original Rancho shocks? I do not plan on lifting the truck; just asking and researching what other people have done and are happy with.

 

Thanks,

 

Rob

 

I had my 6112s on the truck for over 1.5 years now and am still very pleased with them. I have E load rated KO2s on it and they’re currently at 65 psi, truck is still comfortable. I have a Max Tow so I can’t compare to the Ranchos or cheaper Bilsteins but the 6112s have been great so far.

  • 5 weeks later...
Posted (edited)

wrong issue addressed

 

Thanks for the replies

Edited by SWOYER
wrong issue addressed
Posted
23 hours ago, SWOYER said:

I've had my 6112 Front / 5160 Rear setup for about 2-3 years now. At first it was great but now, especially on the highway, the front end feels like an old Cadillac or a boat.. If you hit a decent dip or bump in the road the front end goes up and down several times before finding equilibrium. It's not super fast like it has no shocks at all, but it doesn't have the control that I feel like it should. I do have them on the highest setting without any control arms. 

 

Are the shocks toast or is this just something I need to live with on these trucks?

Since they’ve only been available for our trucks for about 2 years that’s a pretty short time for failure. I think the 6112s have some sort of lifetime warranty but the 5160s have a 90 day warranty. I would reach out to Bilstein and see what they have to say. I’m coming up on 2 years of my 6112s/5160s and I’m still happy so it sounds to me like you have a failure.

Posted

Thinking the 4600 will be the route I go when I see some in stock. I don’t plan on lifting or leveling but I occasionally hit the hunting trail, gravel road, or road to the camp site. I don’t tow anything (yet) and am a little worried about the 5100’s being a little too harsh for my 20 inch snowflakes under an empty bed. Might go up on the next set of tires to a 275/60/20 instead of the stock 275/55/20 that I have now as well.

 

I wish I could say my truck spent more than 95% of its time off the pavement but I’d be fibbin. 😉

  • 2 weeks later...
Posted
On 5/11/2021 at 7:28 PM, truckguy82 said:

I bought my k2xx after my ‘97 tahoe caught on fire

 

i wish they still road like that. There was no balance of handling and ride comfort, it was only ride comfort. I doubt there is a car on the road today with as soft and comfortable suspension.

 

i didnt realize how good it was when i owned it honestly.

 

90’s american boats will go down in history as the best riding cars ever built

 

Go ride in a new Full Size SUV from GM with adaptive suspension and air ride, you will probably think otherwise. They rode nice back in the day but were a little floaty over larger bumps which off set the nicer ride on the smaller stuff (don't forget cars back then creaked and rattled over bumps). Our 2021 Yukon Denali is amazing at how well it rides. We have had all the GM flavors over the years including a 1975 Pontiac Grandville (talk about a massive boat with a 455) to Bonnevilles and Le Sabres/Park Avenues until switching to vans/suvs and trucks the last few decades and this new SUV rides incredible compared to anything else. 

 

I would not be surprised if on the next gen the trucks adapted a IRS from the SUV's for the high end versions or the half tons as one of the engineers pointed out it was tough enough for truck stuff. With all these suburban dads buying the box checker trucks not to tow and haul but just drive to work and complain about the ride, well something like an air ride IRS with adaptive suspension will fix those complaints (until they start complaining about not having massaging seats or some other luxury car feature). 

 

Tyler

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,739
    Total Members
    8,960
    Most Online
    chfkief
    Newest Member
    chfkief
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,532 Guests (See full list)


  • Latest Articles

  • Posts

    • Fred was in the fertilized egg business. He had several hundred young pullets, and ten roosters to fertilize the eggs He kept records, and any rooster not performing went into the soup pot and was replaced. This took a lot of time, so he bought some tiny bells and attached them to his roosters. Each bell had a different tone, so he could tell from a distance, which rooster was performing. Now, he could sit on the porch and fill out an efficiency report by just listening to the bells. Fred's favourite rooster, old Butch, was a very fine specimen, but this morning he noticed old Butch's bell hadn't rung at all! When he went to investigate, he saw the other roosters were busy chasing pullets, bells-a-ringing, but the pullets, hearing the roosters coming, would run for cover. To Fred's amazement, old Butch had his bell in his beak, so it couldn't ring. He'd sneak up on a pullet, do his job and walk on to the next one. Fred was so proud of old Butch, he entered him in the City Show and he became an overnight sensation among the judges. The result was the judges not only awarded old Butch the "No Bell Piece Prize," but they also awarded him the "Pulletsurprise" as well. Clearly old Butch was a politician in the making. Who else but a politician could figure out how to win two of the most coveted awards on our planet by being the best at sneaking up on the unsuspecting populace and screwing them when they weren't paying attention. Vote carefully in the next election, you can't always hear the bells.
    • Can someone confirm if the GM order workbench terminal is able to validate a custom build sequence:   1) Initialize the Allocation Base: Open a new vehicle build queue, select the 2026 Chevrolet Suburban 4WD, and pick the High Country (3LZ Preferred Equipment Group).   2) Select the Diesel Powertrain: Go directly to the engine configuration screen and choose RPO code LZ0 (3.0L Duramax Turbo-Diesel). Ensure it maps to the MHS 10-speed automatic transmission.   3) Deploy the Seating Swap: Navigate to the Interior Options screen and enter RPO code ATT to replace the standard captain's chairs with the power-release 60/40 bench seat. Because you are not trying to force a separate luxury or air-suspension bundle, the standard, premium D07 Fixed Floor Console remains active. The system will accept this change immediately without triggering a warning message.   3)Apply Heavy-Duty Hauling Capability: Input RPO code NHT (Max Trailering Package). The commercial terminal will automatically bundle the required trailering hardware and software modules to support the diesel engine's maximum towing capacity.   5) Layer the Premium Tech and Glass: Separately add code C3U (Panoramic Power Sunroof) and code UKL (Super Cruise) to the order screen.   6) Run the Final Validation: Click the "Validate Order" button at the bottom of the interface.
    • Spent the last hour or 2 googling and reading up on the spacer thing. I don't like the loss of thread contact on the slip on spacers, but it appears you can get "extended" lug nuts that reach into the hole of the wheel to get back the lost threads. Looks like the only true hubcentric slip on spacers are at least .375". I'd want as little as I could get away with and don't want to cause other clearance issues going any thicker. Bora seems to offer what appears to be a well made .375" spacer and extended lug nuts. I searched here and did find a couple threads recommending Bora. But not cheap. By the time I buy spacers and lugs, new TPMS sensors, then pay a tire shop to install the new sensors, I suspect I'm going to be in over $400. Thinking about running out and getting some washers to put behind the wheel to see if .375" is enough to clear calipers, turn lock to lock without rubbing, and to see if the wheels/tires look strange pushed out a little. This would just be to check fitment.
    • Roadmaster makes some quality parts; I have their sway bar. I considered the RAS, but I ended up bagging. I didn't know what kind of ride I'd get with RAS, and the bags have interior jounce bumpers, so I can run 0 pounds pressure. I figured I'd have the best of normal suspension ride with assist on-demand. But it seems you got pretty much the same in one item.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...