Jump to content

Wireless charging

jrhoyt84
 Share

Recommended Posts

John Foley New Member

John Foley

Posted
Posted
9 hours ago, lerbud said:

You probably pinched the wiring in the harness and shorted it. That is what happened to mine. I was able to fix the harness and route in better after the repair. 

I’ll take a look thanks 

  • Replies 557
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ed36rgz71
Ed36rgz71

Have S8+ with a case did this quick and easy just flip the rubber part and you're good to go    

8lugCT
8lugCT

Because the charger is positioned toward the back, and with the way the pad is, the bumper on the backside pushes the phone forward away from the charger. So reversing the mat allows the phone to be p

David Ulbrich
David Ulbrich

The 2018 works just fine with my iPhone X.  I just went to the dealership and tested it out.  I got the part number for the 2018 wireless charger module which is 13507652.  The parts guy said that it

Posted Images

kittmaster Enthusiast

kittmaster

Posted
Posted

So at this point, does someone have a definitive list of OEM part numbers to be able to ADD this to the SLE 2016 Yukon XL that didn't come factory installed?

 

I know it needs a new harness since there is no 12V plug back there to plug in the wireless module (I opened and verified this).

 

I guess I'm looking for the module number, harness number, OEM trim pieces for the MAT, and whatever else is needed.

 

Can anyone help me with that?

 

Thank you.

Chris

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
So at this point, does someone have a definitive list of OEM part numbers to be able to ADD this to the SLE 2016 Yukon XL that didn't come factory installed?
 
I know it needs a new harness since there is no 12V plug back there to plug in the wireless module (I opened and verified this).
 
I guess I'm looking for the module number, harness number, OEM trim pieces for the MAT, and whatever else is needed.
 
Can anyone help me with that?
 
Thank you.
Chris

The module is compatible for any vehicles that have wireless charging. Module part # is 13521066. If your console already has wireless charging, you’ll just need the module and adapter harness. If you need those two items, I stock them.

If you are trying to retrofit this into a console that doesn’t have wireless charging, that may be a different path. You’ll need a lid that supports it.

I make a harness that T’s off the rear 12V plug for $45. Plugs inline to the 12V plug harnesses.

Lastly, not all charging mats fit the lids.

f82913f9f778e3c18ed7f57d16eb2c28.jpg




Sent from my iPhone using Tapatalk
kittmaster Enthusiast

kittmaster

Posted
Posted

I assumed my lid could just be remove the non ribbed mat and put in a ribbed mat and the charging module and harness. Is that not the case? It seems so from all the videos I see of people opening it up....the mounting pems are there, just no module.

 

I am looking for the OEM harness so that when charging is working the lightning bolt shows up on the screen, that needs the harness trigger wire in the OEM harness for that to happen.

 

I can do all the work, just need to know what PN of that harness should be to do it. I can't get a clear answer on the PN of an SLE trim that has wireless charging to buy that part. Many don't show the proper image of it either....so I'm hoping someone who's BTDT might know.

 

The 12v is the easy route, but I'm looking for a true OEM retro install....if I had taken the time to research SLE vs SLT vs Denali, I would have ensured to get a truck with it in.....unfortunately, it was an impulse buy and not enough research done to make a proper decision, so ultimately my fault.

 

As an FYI, in my 93 vette, I installed OEM FX3 ride control and LTPWS, so I understand what it takes to make this change and ensure proper wiring is in place to cover all the bases.

 

TY for the fast response.

 

Chris

pgamboa Senior Enthusiast

pgamboa

Posted
Posted
I assumed my lid could just be remove the non ribbed mat and put in a ribbed mat and the charging module and harness. Is that not the case? It seems so from all the videos I see of people opening it up....the mounting pems are there, just no module.
 
I am looking for the OEM harness so that when charging is working the lightning bolt shows up on the screen, that needs the harness trigger wire in the OEM harness for that to happen.
 
I can do all the work, just need to know what PN of that harness should be to do it. I can't get a clear answer on the PN of an SLE trim that has wireless charging to buy that part. Many don't show the proper image of it either....so I'm hoping someone who's BTDT might know.
 
The 12v is the easy route, but I'm looking for a true OEM retro install....if I had taken the time to research SLE vs SLT vs Denali, I would have ensured to get a truck with it in.....unfortunately, it was an impulse buy and not enough research done to make a proper decision, so ultimately my fault.
 
As an FYI, in my 93 vette, I installed OEM FX3 ride control and LTPWS, so I understand what it takes to make this change and ensure proper wiring is in place to cover all the bases.
 
TY for the fast response.
 
Chris

The lightning bolt icon that shows up will only work if you had it before. I added all the wiring in my truck include that indicator icon and it didn’t work. Likely because the BCM is not “enabled” to show that icon.


Sent from my iPhone using Tapatalk
outrag1 Enthusiast

outrag1

Posted
Posted

I don't mean to hijack this thread swapping console lids and wiring, but just got my 18 LTZ and it already comes with the wireless pad.  Does it only work with certain phones or is there a certain setup needed to get it to work?  I have an LG android and it didn't seem to do anything when placing it on the mat.

 

Thanks

BluEyeItln Enthusiast

BluEyeItln

Posted
Posted

If your using an iPhone, it works on the 8 and up.  I believe it's the same on most the android phones as my Samsung Galaxy 8 has it and not the previous version.  

 

The iPhone 8, 8 Plus and X all support wireless charging, but you can add it to any older model with a Lightning port. Here's how to add wireless charging to the iPhone 7 and older phones. If you buy an iPhone 8, iPhone 8 Plus or iPhone X, you'll find it supports Qi wireless charging out of the box.

https://www.techradar.com/how-to/how-to-wirelessly-charge-your-iphone-7 

 

Android Phones:

  • Samsung Galaxy S9 and Galaxy S9+
  • Samsung Galaxy Note 8.
  • Samsung Galaxy S8 and Galaxy S8+
  • Samsung Galaxy S7, Galaxy S7 Edge, Galaxy S7 Active.
  • LG G7 Thinq.
  • LG V30.
  • Sony Xperia XZ2.
  • Nokia 8 Sirocco.
  • 3 weeks later...
Diverdan1 New Member

Diverdan1

Posted
Posted

Salesman pointed out I have wireless charging although I did not have a phone that supported it. Now that I have a phone that supports wireless charging I have tried and found that I am not getting a charge, and the pad is not big enough for a iPhone XR. I opened up the consol lid and removed the inner cover to find there is no module or wiring, just the pad built into the consol. Next time I buy a car, I will open the hood to make sure the engine is included with the body....

So the work around is a 12v usb plug in pad that sits on top and covers the OEM pad.

Works great with a case on the phone and looks good. $25 on Amazon. 

 

Wireless Car Charging Pad, ZealSound Qi Car Charger Mat & Phone Holder with Fast USB 3.0 Car Charger Adapter Phone Holder 10W/7.5W/5W Fast Charging Compatible for All Qi Enabled Phones (Black)

by ZealSound
 
  • 2 months later...
smileyman57 Enthusiast

smileyman57

Posted
Posted (edited)

I just purchased a 2017 Sierra and the wireless charging doesn't seem to kick in on my Pixel 3.  I have tried moving it around slowly on the pad with no luck.  Also tested with and without the case.

 

When I look at the compatibility list on the website I see Pixel 3 is not listed.  Is this true?  Will the updated charging kit fix this?

 

https://my.chevrolet.com/content/dam/gmownercenter/gmna/static/pageImages/learnAbout/articles/documents/GM_Wireless_Charging_Compatible_Device.pdf

Edited by smileyman57
added case statement
mn camper guy Enthusiast

mn camper guy

Posted
Posted
My Pixel 3 in an OtterBox charges just fine in my 2017.
That is interesting. I test drove 2 2017s and a 2016 and non of them would charge it. I wonder if it some setting on my phone or something.


Sent from my Pixel 3 using Tapatalk

  • 2 weeks later...
mn camper guy Enthusiast

mn camper guy

Posted
Posted
What does this kit provide for you over what is in the truck already? Or is this kit only for those that don't have wireless charging in their truck?

I have a 2017 Sierra, would this fix my pixel3 charging issue?

Sent from my Pixel 3 using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined

  • Who's Online   6 Members, 0 Anonymous, 882 Guests (See full list)

  • Latest Articles

  • Posts

    • 81mmcat
      Higher oil pressure after DFM shut off

      By 81mmcat · Posted

      Can anyone explain why the oil pressure runs higher after the DFM is shut off?  just installed the Pulsar Lt.
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • Coastie05
      It's Been a Long Time...

      By Coastie05 · Posted

      Welcome back!
    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...