Pics of leveling kits with stock wheels

[Leevon]

Bilstein 5100's with 1/2" top spacer, 1" over rear blocks on 275/70/18 BFG's.  Bora 1.75" wheel spacers and better photos TBD.  It's my "factory offroad" creation.  

Edited September 20, 2018 by Leevon

[luckyshotbrooks]

ReadyLift 2.25” leveling kit with new control arms.

275/70r18 NittoTrail Grapplers

[Kubs]

15 hours ago, Leevon said:

Bilstein 5100's with 1/2" top spacer, 1" over rear blocks on 275/50/18 BFG's.  Bora 1.75" wheel spacers and better photos TBD.  It's my "factory offroad" creation.  

How is the ride with the top spacer on the Bilstein's?  What setting did you put the snap ring on?  So did you get almost 2.5" total lift in the front?  This looks good, and I would like a little more lift on mine, but I have heard the Bilstein on the top notch with a spacer rides rough.

[SilverSilvy]

Just traded out of my NNBS Sierra into this 2018 Silverado. Went with 2" level with factory 22s, and 305/45-22 Terra Grappler G2s. Better pictures to come

[Leevon]

On 9/18/2018 at 6:14 AM, Kubs said:

How is the ride with the top spacer on the Bilstein's?  What setting did you put the snap ring on?  So did you get almost 2.5" total lift in the front?  This looks good, and I would like a little more lift on mine, but I have heard the Bilstein on the top notch with a spacer rides rough.

Ride is great.  I'm at the top groove, yes right at about 2.5".  I drove it with the BFG's before and after the struts and it rides better after.  The load range E tires are a little stiffer than the factory tires,  that's about all I can detect.  Actual dips, bumps, etc are smoother.  

Edited September 20, 2018 by Leevon

[Hate Work]

On 9/17/2018 at 3:51 PM, Leevon said:

Bilstein 5100's with 1/2" top spacer, 1" over rear blocks on 275/50/18 BFG's.  Bora 1.75" wheel spacers and better photos TBD.  It's my "factory offroad" creation.  

Are sure those are 275/50R-18? That would make those tire less than 29"....

[Hate Work]

On 9/18/2018 at 3:07 PM, SilverSilvy said:

Nice choice of color! 

[Leevon]

9 minutes ago, Hate Work said:

Are sure those are 275/50R-18? That would make those tire less than 29"....

Typo, meant 275/70/18.  33.2" according to BFG's spec sheet.   I went up and fixed it for future readers, and so we can delete our posts if needed. 

Edited September 20, 2018 by Leevon

[C&L]

Pro comp leveling kit with 22x9 snowflake replicas an 33x12.50r22 toyo mts.

[cwhitehurst34]

On 9/17/2018 at 3:51 PM, Leevon said:

Bilstein 5100's with 1/2" top spacer, 1" over rear blocks on 275/70/18 BFG's.  Bora 1.75" wheel spacers and better photos TBD.  It's my "factory offroad" creation.  

That is how a Z71 should come from the factory! Super nice truck, perfect stance!

[Leevon]

On 9/28/2018 at 10:24 AM, cwhitehurst34 said:

That is how a Z71 should come from the factory! Super nice truck, perfect stance!

Thank you!  That's exactly what I'm going for.  I installed 1.75" BORA hub adapter/wheel spacers today and got a little rubbing to deal with.  Here's updated pics.  

Edited September 30, 2018 by Leevon

[Rally_18]

Got the truck leveled yesterday. 2.25 Readylift with uca. Stock wheels and tires till atleast after winter.


Sent from my iPhone using Tapatalk

[ducklawyer]

Sent from my iPad using Tapatalk

What’s info on this setup?


Sent from my iPhone using Tapatalk

[Jason23]

Thought I'd chime in here. Nothing at all special, but this is my 2017, Z71 with a 2" Southern Truck under strut leveling kit and factory wheels and tires (265's on 18's). My ultimate goal is to get some 275 70's on it, but that will have to wait until I wear out the stockers. 

 

Leevon, the look you have achieved is my ultimate goal. That looks just right to me.  Well done!

 

Edited October 18, 2018 by Jason23

[djw88]