2019 Sierra AT4 level/wheel/tires mod

[GhostComanche]

Here's my truck. 2019 AT4 with 6.2 liter. 1.5” Motofab level with 295/70/18  Cooper SST Max , Pedal Commander and Borla Pro XS Exhaust.  Enjoying this truck better than any GM that I have owned, both gas and diesel.............if we could only get it to where it would quit turning my phone volume down to 2 bars. 

Edited August 6, 2019 by GhostComanche

[paulny]

On 8/5/2019 at 9:25 PM, GhostComanche said:

Here's my truck. 2019 AT4 with 6.2 liter. 1.5” Motofab level with 295/70/18  Cooper SST Max , Pedal Commander and Borla Pro XS Exhaust.  Enjoying this truck better than any GM that I have owned, both gas and diesel.............if we could only get it to where it would quit turning my phone volume down to 2 bars. 

Looks amazing.  Any rubbing or trimming?  How far off is the speedometer?

[BBradac9]

No level kit yet but probably will add the ReadyLift kit for the AT4.  

 

Edited September 3, 2019 by BBradac9

[Addicted2HP]

On 6/16/2019 at 12:09 PM, Darcy said:

35s on stock rims with a leveling kit

 

 

That is the perfect look IMO... What 35's do you have on there ?  Did you do any cutting ?

[Addicted2HP]

Hey anyone in the Toronto area that has the OEM 20 inch rims and would want to sell them?

Edited October 3, 2019 by Addicted2HP
correction

[paulny]

On 7/28/2019 at 6:56 PM, thsoccer3 said:

2" Rough Country 1318 level

295/60R20 (34" x 11.7") Nitto Ridge Grapplers

AMP Powersteps

BAKFlip MX4 bed cover

 

I have no rubbing, but it is very close on the upper control arm.  The ride has not changed, and the truck is perfectly level.  I am very impressed with the upper ball joint and CV angles.  More pics to follow. 

Looks great!  I am thinking of going with the 295/60/20 Ridge Grapplers as well.  I don't have a level yet, but will add it when I add the tires.  Can you please take a picture of how close the tire is to the upper control arm?  How much gap do you have?  I was considering the 285/60/20's just in case.

[Justin Wimsatt]

On ‎11‎/‎11‎/‎2018 at 6:55 AM, gothp28 said:

Found this online. Stock 20 in size

Sent from my SM-G965U using Tapatalk
 

Do you know if these are stock tires that came with the At4?  Im looking at the same Wheels

[Lance1980]

On 7/28/2019 at 6:01 PM, thsoccer3 said:

2" Rough Country 1318 level

295/60R20 (34" x 11.7") Nitto Ridge Grapplers

 

View of CV angle and two half-decent views of upper ball joint (tires are straight in top photo, and wheel is at full lock in the second photo).

Thank you for all the pics.  Great truck, I am going for exact look!  Do you think a 295/65r20 would fit?  If so, would it require trimming on the fender wells to make it fit since the tire is 1.18"s taller?  Lastly, your tires are 11.77's wide, you think a 12.5" would rub on the UCA - or even fit?  Hard for me to tell from the two photos, but curious nonetheless.

[Jacksfan98]

On 4/24/2019 at 11:30 PM, BigWoo22 said:

Just had mine done today. I had my stock wheels stolen while parked in my driveway. 

 

Fuel Throttles 20x9, no spacers needed

Nitto Ridge Grapplers 285x60x20

1” level 

Who manufactures a 1” level kit?

[Tyler Gomez]

My truck just off the lot, I usually get wheel spacers on all my trucks and had no problem with them. Anyone installed them on their truck yet? I'm trying to get information on whats the minimum size i need to not cut the studs and any pictures you have would be nice.

[EXSlider400]

On 12/20/2019 at 9:48 PM, Jacksfan98 said:

Who manufactures a 1” level kit?

Motofab. I plan on Using the 1/2” top and 1/2” bottom with OEM bolts. Just have to verify the UCA’s don’t need to be changed on AT4/TB since I think they are the same as all other 1500 so would be 3” total. If so, may just have to do 1/2” only. 

 

https://motofablifts.com/c-1390599-all-products-product-list.html

Edited December 25, 2019 by EXSlider400

[jwilso98]

Forgot to post after I got my level and wheels/tires 

 

1.5” motofab level 

22x9 GM wheels 

285x55x22 nitto ridge graps

[Thal]

On 4/24/2019 at 3:12 PM, Cody Melancon said:

I need help.  Just bought an AT4.   I’m trying to order these online.  I read in this thread that 4.75 backspace will work with no rub and spacing. Just want to make sure these will clear the caliper.  Anyone that knows for sure please chime in. 

Did you ever get anywhere with this? I have the exact same question with exact same wheels and offset. If you wouldnt mind emailing me back that would be awesome

[Pedrohern]

On 3/25/2019 at 5:25 PM, Sam_dwlng07 said:

I thought i would post this to help anyone looking for rims and tires i had a hard time finding anything on this truck . Heres my 2019 gmc sierra at4 with 4p08 4play rims with 33x12.50x22 we had to level the truck and add a 1/4 inch spacer to bring rim out off caliper and some triming had to be done on the mud flaps so it didnt rub but wow what ya think . 

 

[Pedrohern]

Hey brother, question by any chance did you cut the front plastic as well. Cuz mine rubs from the front and back ... also rubs more from the passenger wheel