Jump to content

Recommended Posts

Posted
On 2/24/2021 at 12:52 PM, Kclyatt said:

Update....Few months into sealing my rear glass and happy to report no further leaks. I recently sealed up my spoiler as a added guarantee because as we can see GM does not have our best interests in mind. I used door trim from Lowes and this particular type has ridges to help with the trim tool to push into the tight space and also has adhesive on the back to hold into place once set. The third brake light I used clear silicone (same type 3M) since that gap was too tight for trim.

 

Hope my enthusiasm to prevent future leaks helps another in this exclusive club of leakers!

trim.1.jpg

trim.2.jpg

Trim.3.jpg

Thank you for sharing this. Can you advise what 3m silicone you used and possibly provide a link? 
 

Thanks again,

JMF

Posted
10 hours ago, jftwist said:

Thank you for sharing this. Can you advise what 3m silicone you used and possibly provide a link? 
 

Thanks again,

JMF

 

4F71134E-0FEC-474F-907F-8679549FEDBE.png

Posted
28 minutes ago, Kclyatt said:

 

4F71134E-0FEC-474F-907F-8679549FEDBE.png

Thank you very much for your assistance. 
 

JMF

Posted

There is another type of self leveling 3m adhesive I believe that is called out in the TSB


Sent from my iPhone using Tapatalk Pro

Posted

Just curious if anyone who has a topper/camper shell if that's helped prevent or stop the amount of water coming in the cab from the rear window? 

Posted (edited)

TSB Sealing Repair Completed – UPDATE

 

Quick background – Picked up my ’21 Sierra on 12/4/20. Within 10 days of ownership I had the leak on both sides at the top of the slider. Dealer completed the TSB, and I could see a heavy bead of the sealer that was laid across the top frame of the slider.  After the TSB was done I didn’t see any leaks and continue to check very closely after every rain. I have a small towel sitting on top of the rear seat back rest just in case the slider starts leaking again. About a month ago during a steady rain I saw a drop of water from the same location - literally a few drips where it was barely leaking, but the towel on the seat back rest was dry to the touch as was the carpeting.

 

As others in this thread have suggested and since it was barely leaking I decided to try the flowable silicone (permatex 81730) rather than have the truck torn apart again. When we had a warm day I cleaned the top of the slider as best I could and also taped off the top of the glass on the slider to try and minimize the mess. I used a full tube of the permatex and made a few passes across the top of the slider frame, being careful to not overfill the area. As other posters have mentioned that have used this product it is thin and runny, so being careful minimizes the clean up.

 

Since using the flowable silicone 4 weeks ago we have had both snow and rain. Over the past week we have had significant rain, including long periods of drizzle, solid rain and heavy down pours. So far no leaks, so the effort was well worth it. I can see along the top of the slider frame where the flowable silicone has dried there is an even layer of silicone across the complete gap. It looks like the permatex product took care of any small gaps that the TSB work didn't completely seal. So far I’m really impressed with the permatex product and will use it again should I see a small leak in the future.

 

Pic below of where it was leaking and also of the permatex product used. Thanks to everyone that recommended this product and the idea.

 

 

leak.JPG

permatex.JPG

Edited by DSW1519
Posted
4 hours ago, DSW1519 said:

TSB Sealing Repair Completed – UPDATE

 

Quick background – Picked up my ’21 Sierra on 12/4/20. Within 10 days of ownership I had the leak on both sides at the top of the slider. Dealer completed the TSB, and I could see a heavy bead of the sealer that was laid across the top frame of the slider.  After the TSB was done I didn’t see any leaks and continue to check very closely after every rain. I have a small towel sitting on top of the rear seat back rest just in case the slider starts leaking again. About a month ago during a steady rain I saw a drop of water from the same location - literally a few drips where it was barely leaking, but the towel on the seat back rest was dry to the touch as was the carpeting.

 

As others in this thread have suggested and since it was barely leaking I decided to try the flowable silicone (permatex 81730) rather than have the truck torn apart again. When we had a warm day I cleaned the top of the slider as best I could and also taped off the top of the glass on the slider to try and minimize the mess. I used a full tube of the permatex and made a few passes across the top of the slider frame, being careful to not overfill the area. As other posters have mentioned that have used this product it is thin and runny, so being careful minimizes the clean up.

 

Since using the flowable silicone 4 weeks ago we have had both snow and rain. Over the past week we have had significant rain, including long periods of drizzle, solid rain and heavy down pours. So far no leaks, so the effort was well worth it. I can see along the top of the slider frame where the flowable silicone has dried there is an even layer of silicone across the complete gap. It looks like the permatex product took care of any small gaps that the TSB work didn't completely seal. So far I’m really impressed with the permatex product and will use it again should I see a small leak in the future.

 

Pic below of where it was leaking and also of the permatex product used. Thanks to everyone that recommended this product and the idea.

 

 

leak.JPG

permatex.JPG

What dealer did the original TSB for you?  I am also in Bucks County, and was thinking of taking it to Faulkner.  

Thanks in advance!

Posted
7 minutes ago, SPASierra said:

What dealer did the original TSB for you?  I am also in Bucks County, and was thinking of taking it to Faulkner.  

Thanks in advance!

I had the TSB done at O'Neil GMC in Warminster. They used an outside glass specialist and they did a good job. I can't even tell the truck had been touched. I bought this truck at O'Neil, and I'm very happy with how they've treated me - both in sales and service. I attribute the slight leak (after the TSB) to the crappy window frame design.  

Posted
1 minute ago, DSW1519 said:

I had the TSB done at O'Neil GMC in Warminster. They used an outside glass specialist and they did a good job. I can't even tell the truck had been touched. I bought this truck at O'Neil, and I'm very happy with how they've treated me - both in sales and service. I attribute the slight leak (after the TSB) to the crappy window frame design.  

Thanks for the quick reply!  I will give them a call!

 

Posted
Thanks for the quick reply!  I will give them a call!
 
No problem. Dave the service manager is a really good guy.

Sent from my Pixel 3a XL using Tapatalk

Posted

I have a 2021 1500 AT4, I've washed it once and didn't notice any leaking. Only 1200 miles on it and I garage it every night. Tagging this thread for when mine does start leaking..

 

Posted
9 hours ago, Wormydog1724 said:

I have a 2021 1500 AT4, I've washed it once and didn't notice any leaking. Only 1200 miles on it and I garage it every night. Tagging this thread for when mine does start leaking..

 

Hopefully you won't need to.

Posted
I have a 2021 1500 AT4, I've washed it once and didn't notice any leaking. Only 1200 miles on it and I garage it every night. Tagging this thread for when mine does start leaking..
 
Washing doesn't usually have enough standing water to get the leak going like sitting in the rain. Wish you luck. So far my 2nd attempt, replaced whole window, has worked.
Posted

Add me to the list, 2020 AT4. Built Nov 2019 in mexico. 17,000 miles. Home garage, and work garage, and live in PHX, so not much water exposure. I'll probably wait a while to see if GM can come up with a good fix.1cb891b6f0ea35301c51b01c23234629.jpg7eebef29ea3335764b63e79080920844.jpg

Sent from my Pixel 5 using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,140 Guests (See full list)


  • Latest Articles

  • Posts

    • Yep! This should be a pin somewhere as @pgamboa really dives into all of this. Thanks for reposting the link!
    • I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
    • Atlas, you kill me As aggravating as a project like this can be you have been unable to hide your fascination with learning and using that angst against this beast like a Ninjitsu Master. It amuses you, admit it now.      BTW, love your writing style. 😉       
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...