Jump to content

Recommended Posts

Posted
1 hour ago, Low Elevation said:

Well they were the first to crack the new corvette ecu. So I would say this is the real deal. 
https://gmauthority.com/blog/2022/05/trifecta-becomes-first-company-to-natively-tune-c8-corvette-ecu/

 

Until GM says Trifecta is a partner I’m suspect. I retired in 2014 from Cummins and military grade encryption wasn’t being defeated by outside programmers nor have I seen anyone do it except backdoor patch piggyback systems that usually fail on new GM products. I’m all ears and eyes. Thanks for sharing. 

Posted
14 hours ago, customboss said:

The air intake is located upper left hand side ( drivers side under hood facing up).  Turbo air flow restriction NOT A PLAYER. I have pictures on this site of my trail boss buried in snow up to 

lower head lights and doing just fine. 

 

I don't plow but live in high snow area at 9000' msl in Southern CO. The front suspension is plenty 

tough to handle a once a week snow plowing.

 

You will need counter weight in bed as like majority of GM trucks its sprung too light in back over locking differential for my 2022 LTD

Trail Boss. I ended up needing about 720 lbs of sand tubes @ 60 lbs a piece.  

 

For a Custom it MAY not be stiff enough in front unless you have Z71 package or better shocks etc. 

 

Off topic All the sudden this site is wrapping wide on display is that happening to others or my browser? 


Thanks for the replies. I probably won’t be plowing with it this first winter but maybe next once it is broken in and I’m not terrified to put a scuff on it anymore. I will definitely. post of how it handles it. 

  • Like 1
Posted

Update on the E85, engine light is back off, I suspect maybe the ECU finally adjusted enough in the 100 or so miles I've driven to not “run lean”. I will say there is a noticeable difference in bottom end torque, the truck on 87 feels torquey, but theres a difference on E85 that you can feel, I barely pass 2500rpm’s and the truck gets right up to speed.

  • Thanks 1
Posted
8 hours ago, Slvrado said:

Update on the E85, engine light is back off, I suspect maybe the ECU finally adjusted enough in the 100 or so miles I've driven to not “run lean”. I will say there is a noticeable difference in bottom end torque, the truck on 87 feels torquey, but theres a difference on E85 that you can feel, I barely pass 2500rpm’s and the truck gets right up to speed.

Light off in 100 miles? That’s really telling if you have over 50% ETOH content. Makes me think there is a ethanol fuel map embedded then. Hmmm.  Thanks for sharing. I can’t get E85 but when I can I’m gonna back up your testing. 

  • Like 1
Posted

Yeah has to be over 50% ETOH in the tank especially at 15 gallons. Tired getting a family member with the same truck (2.7l) to run e85 with me and gather more data, but he called the dealership and “spoke with a mechanic” who said not to. So i guess ill be the only data point for now. I will say paying $3.99 for gas again is nice lol 

  • Like 1
Posted
1 hour ago, Slvrado said:

Yeah has to be over 50% ETOH in the tank especially at 15 gallons. Tired getting a family member with the same truck (2.7l) to run e85 with me and gather more data, but he called the dealership and “spoke with a mechanic” who said not to. So i guess ill be the only data point for now. I will say paying $3.99 for gas again is nice lol 

Your mpg will be interesting post 100 mile MIL code then disappearing. 

Posted

I was down to 11mpg all city with light on, since its gone off ive jumped up to 15mpg average

  • Like 1
Posted
1 minute ago, Slvrado said:

I was down to 11mpg all city with light on, since its gone off ive jumped up to 15mpg average

Wow. 

Posted
1 hour ago, Slvrado said:

I was down to 11mpg all city with light on, since its gone off ive jumped up to 15mpg average

Do have a scanner to view dynamically?  I would like to see if you had a permanent MIL code set, the STFT and LTFT and timing at different RPM and loads.

 

If the MIL system corrected and extinguished the the light with no historical MIL code set then our L3B's are setup to correct for Ethanol fuels above 15% with no issues. 

 

Talk about a cheap improvement to HP, TQ and cleanliness!  

Posted
On 6/25/2022 at 4:31 PM, Mike Borowski said:

Aren’t there tunes for the 3.0 duramax?

Not yet but they are close

  • Like 1
Posted (edited)
On 6/26/2022 at 2:14 PM, customboss said:

Do have a scanner to view dynamically?  I would like to see if you had a permanent MIL code set, the STFT and LTFT and timing at different RPM and loads.

 

If the MIL system corrected and extinguished the the light with no historical MIL code set then our L3B's are setup to correct for Ethanol fuels above 15% with no issues. 

 

Talk about a cheap improvement to HP, TQ and cleanliness!  

 

Everything past about 2001 is E-15 capable. 

 

https://www.sae.org/publications/technical-papers/content/2017-26-0072/

Edited by Grumpy Bear
  • Thanks 1
Posted

I do not have a scanner, but the light did come back. It was 109 yesterday and I was driving the truck pretty hard so it could have attributed to it. Ill see if i can barrow a scanner from a GM buddy and log some data.

  • Like 1
Posted
On 6/25/2022 at 10:17 PM, customboss said:

Until GM says Trifecta is a partner I’m suspect. I retired in 2014 from Cummins and military grade encryption wasn’t being defeated by outside programmers nor have I seen anyone do it except backdoor patch piggyback systems that usually fail on new GM products. I’m all ears and eyes. Thanks for sharing. 

 

Side note, but military grade encryption? That's funny. The military doesn't come up with encryption algos, the computer science guys do. Military just uses standard off the shelf encryption algorithms, your bank or even this website are protected by the same stuff.

 

And while the encryption algorithm is not breakable, the truck comes with everything it needs to communicate which means the encryption keys probably have to be stored on the truck (much like a dvd player is crackable). Or there will be another way to crack in since all these devices don't operate on encrypted streams, they need to decrypt at some point in order to read the actual communications.

 

There is always a way in, it's just obfuscated a little more than in the past.

  • Confused 1
Posted
1 minute ago, the wanderer said:

 

Side note, but military grade encryption? That's funny. The military doesn't come up with encryption algos, the computer science guys do. Military just uses standard off the shelf encryption algorithms, your bank or even this website are protected by the same stuff.

 

And while the encryption algorithm is not breakable, the truck comes with everything it needs to communicate which means the encryption keys probably have to be stored on the truck (much like a dvd player is crackable). Or there will be another way to crack in since all these devices don't operate on encrypted streams, they need to decrypt at some point in order to read the actual communications.

 

There is always a way in, it's just obfuscated a little more than in the past.

 

“Military-grade” refers to AES-256 encryption. This standard was established in order to be in compliance with the Federal Information Processing Standards (FIPS) that govern the handling of sensitive data. It offers 128-bit block encryption via the use of cryptographic keys.

 

Having said that I found out from my GM service manager who also races a Cadillac LTA with larger than stock twin turbo 6.2L V8 that there are 3 companies including Trifecta who has done the work to get into the GM ECU's and mod them.  So I was wrong about that. 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Oil pump noise was discussed before.  I will try to remember to record a remote start later this morning. 
    • There are probably a few threads talking about fuel mileage but this one seemed to fit the stats I have seen based on my typical local driven route but with different outcomes based on different seasons/temperatures. I have a few hundred pounds of items that consistently ride on the truck at all times such as a bak flip cover, rubber bed mat, tools and extra fuel so I would be something over 8100 lb without me in the truck. All these examples are based on a 100 mile round trip to a town plus running around town so maybe 110 to 120 miles in total for a trip. Using regular fuel and I assume it always has some ethanol in it but don't know the percentage they blend in. Also speed wise I am going at 62 mph and non aggressive driving although less speed yet if its crappy winter condition roads. I am going by an initial reset of the computer generated fuel use numbers averaged over a couple of thousand miles or so for each weather/season so they may be more optimistic then actual hand calculated numbers. Basically this is painting a picture of doing the same drive but seasonal conditions and temperature being the major variable to the end result. Oh and although I am in Alberta Canada, I am converting it to miles per US gallon so there is no confusion.    So winter time it gets cold here, no real surprise there and the roads can be clear at times but also often have packed rough snow or are are driving through loose snow ( they do a poor job of plowing the highways ) and yes this includes the extra idle engine time due to trying not to freeze ones butt off. 12.7 mpg is what I was getting during the winter months on average.    Then during the spring when it was around the freezing point and the highways are clear of snow, I was getting around 14.25 mpg.   Summer time, I have been getting around 15.15 on average but certainly some of the trips showed quite a bit better fuel mileage, so much depended on how much or little I had driven around town and number of engine restarts after sitting for a while at each location. But stating a best fuel mileage trip to town pretending that is what the truck gets on average is fooling ones self for sure !.      As I said in a different post, I had driven a 645 mile trip over a couple of days stint to a different destination then these other daily to town examples above, and was done during the summer with nice weather and not bucking a head wind, also keeping at 62 mph and its a rolling landscape type highway drive ( this isn't southern Alberta or Saskatchewan flat lands ) Hand calculated fuel mileage in this case though and it came out to 17.65
    • On my wife's 2020 Blazer (~69000 miles), we started to notice the brakes pulsating at faster speeds. Typically around town you don't notice anything, but highway/interstate driving you will notice it. I decided to pull of the front tires and look at the brakes. I figured with the milage, the pads should be wearing out to their life span, but they actually looked decent. Still with "meat" on them. One pad has a ridge wearing in it, and that same rotor is showing the ridge too. That's not the concerning part...the other rotor appears to have a raised bump on it!  The picture make it look like a pimple! Very odd and strange! NOTE: These are the factory brakes and rotors.   I'm attaching pictures of the front brakes and what they look like ate ~69000 miles.
    • 2024 Chevrolet 2500 HD Custom 6.6 Gas Canadian built Truck  I tried to search for my previous thread on this topic but cant find it so my apoligies  for starting another one    #1   Since we have owned our truck purchased new it has this strange noise after using the remote start function  you press the remote start and you hear it start but right at the end of it starting it almost seems like it wants to start again after the truck is running .   There is no gap in time it is right at the end of the start . Almost sounds like when you have started a car/truck and its running and then you try and start it again and you get that grinding noise ,sort of     #2  You can only hear this if you are standing outside of the truck and near the truck  you cant hear it when you start the truck from inside  the cab . So it may very well be happening when starting the truck that way as in normally    #3   This only happens when it is started after sitting . For how long I don't know but it happens after sitting overnight for sure and it wont do it if you stop the engine after starting and then start it again  I have had it in to the Dealership before concerning this but they did not have the truck  when it was cold to hear it . Now its back in the Dealership left it overnight so they could possibly hear the problem . They said they tried and nothing happened . Well they did not know what they were listening for . I started the truck remotely and BINGO it makes the noise . Oh that sounds weird they say . We need to look into it ! I have left for this week at the Dealership    Does your 2024 2500 HD gas do this ?  Any of you fellas care to take the time and trouble to film this operation from a cold start  so I can hear what your sound like  Really  would like to know if this is anormal sound  Thank You Fellas !!
    • 2026 Z71.  The other day I was backing a trailer into the barn.  The alarm was going off just because the trailer was in the field of the warning sensors when you get too close to something.  For some reason now the warning alarm doesn't work anymore.  It used to go off when I was just normally backing my truck into garage.  I still have the guidelines in the back up camera.  Is there a button or something to push to turn the sound/Alarm on and off?  I have the touch screen in this truck.  There isn't a "P" on the dash except for the parking brake.  I can't find anything in the touch screen under settings or vehicle.  Thank you in advance.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...