Jump to content

sub install

Rfordhamjr
 Share

Recommended Posts

Rfordhamjr Enthusiast

Rfordhamjr

Posted
Posted

Hay everyone,

 

Just got a 19 Chevy 1500. Im looking to add a small sub-woofer. I need to find out the color coding on the wiring harness for the back left speaker.  

My amp has a high level input and I want to tap in in an easy spot. This picture is from right be the power seat adjustment control.  

 

does anyone have any subjection where I might find a wire diagram. Been looking but no luck finding it. May just be to new to have that info out in the wild.... 

 

IMG_20190601_131307.jpg

MasterBasher New Member

MasterBasher

Posted
Posted

Disclaimer: I have NOT verified this.

 

I found the following in the Electrical manual I found at GM-Uplifter

 

{Images moved to bottom so as not to bury the text}

 

Looks like GN/BK (-) and GN (+) are the two you need for the Left Rear Speaker outputs.

 

MM |   color   | Circuit | Description

0.5   | GN/BK |    116   | Left Rear Speaker Signal (-)

0.5   |     GN    |    199   | Left Rear Speaker Control (+)

 

0.5mm = 24awg

1.5mm= 15awg (approx)

 

Based on my search in that document, and the location you are seeing it at, the larger gauge (1.5mm) BU/YE wire you are looking at _might_ be circuit 277-- Driver Power Seat Recline Motor Rearward Control
BU/YE is used throughout the vehicle for many things, none I could find had anything to do with Audio.

 

My suspicion is that due to the low wattage the head unit puts out, 24awg wire is all they used for the speakers. My opinion, not fact though...

 

1NWQCED.jpg

OAhKy0J.jpg

  • 1 year later...
sharkeysierra Enthusiast

sharkeysierra

Posted
Posted
15 minutes ago, Jeff Cooley said:

Curious if anyone has gotten the adapter for a 2020 GMC Sierra.  Where is the amp located in the Bose Premium sound package.  

 

Thanks.

I believe the amp is under the center console. 

eppieguy Senior Enthusiast

eppieguy

Posted
Posted

I’m pretty sure the amp is behind the rear seat. 

Rook126 Enthusiast

Rook126

Posted
Posted

If you have the Bose system and are only trying to get the audio signal for a sub, you could just tap into the Bose sub's speaker wires below the center console instead of a door speaker signal. You don't have to remove the center console to access it and it was't too difficult to locate in my 2020. In addition, the signal has already been through a crossover so no highs are coming through.

Jeff Cooley Enthusiast

Jeff Cooley

Posted
Posted
If you have the Bose system and are only trying to get the audio signal for a sub, you could just tap into the Bose sub's speaker wires below the center console instead of a door speaker signal. You don't have to remove the center console to access it and it was't too difficult to locate in my 2020. In addition, the signal has already been through a crossover so no highs are coming through.
I just saw a post about this. Looks easy enough. I just want a sub added to my system that's it. I was told I'd have to disable the ANC? How do I go about doing that?

Thanks.

Sent from my SM-G965W using Tapatalk

  • 11 months later...
JIGGZZ New Member

JIGGZZ

Posted
Posted
On 7/27/2020 at 10:04 PM, Rook126 said:

If you have the Bose system and are only trying to get the audio signal for a sub, you could just tap into the Bose sub's speaker wires below the center console instead of a door speaker signal. You don't have to remove the center console to access it and it was't too difficult to locate in my 2020. In addition, the signal has already been through a crossover so no highs are coming through.

Can you give us more details on this?

  • 5 weeks later...
Rook126 Enthusiast

Rook126

Posted
Posted
On 7/5/2021 at 9:46 PM, JIGGZZ said:

Can you give us more details on this?

Sorry for the late response JIGGZZ. I haven't been checking my notification lately.

Here's an older post where I tapped into the Bose sub wires for my low frequency signal to my aftermarket amp.

 

  • 9 months later...
eppieguy Senior Enthusiast

eppieguy

Posted
Posted
2 hours ago, WILLIAM DWAYNE said:

What is a 2014 Corvette Premier?

GM produced 500 Premier Edition Laguna Blue 7 Speed 3LT Coupes with a special numbered dash plaque, special wheels and Brownstone Interior and 550 Premier Edition Lime Rock Green Automatic Convertibles as well. Nothing extremely special just loaded with as many options as they offered and just first year of the C7 and you couldn't order them, GM just shipped to certain dealers of their choice and then to be sold to customers. 

  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Jsdirt
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By Jsdirt · Posted

      Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • davester
      OBD not ready?

      By davester · Posted

      Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

      from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...