Jump to content

led lights to replace park sensor

russell45

By russell45
in Modifications & Accessories

 Share

Recommended Posts

russell45 Enthusiast

russell45

Posted
Posted

okay you guys i know this might sound odd but i am trying to find some led lights to replace the park sensors on my new bumper. the reason is it is a bumper replacement bumper and it is only made with the holes pre-drilled and my pickup is NOT equipped with the park sensor feature. i have looked every where trying to find the size of the holes so that i can kinda narrow down my search but i am not having any luck. i am hope maybe yall have some knowledge to lend me.

 

 

thank you in advanced!!

CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted

I'm not sure what you're going for (purpose of the lights) but i think it's a really interesting idea.. I was looking at this thread here a while ago, and I'm thinking maybe these bolt led lights might fill that hole pretty well.  

 

 

I'm thinking these might be rather easy to use, once you find the size and color you're looking for.

Screenshot_20161014-191544.png

 

Please keep us posted and let us know how it turns out. 

 

russell45 Enthusiast

russell45

Posted
  • Author
Posted

I am going to look into those. My main reason really is to fill the holes for the sensors without using a rubber plug. Looking for maybe amber or just white for the front and red for the back 

  • Like 1
CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted

I would imagine you could get pretty trick with them, depending on how much time you want to invest in it. You could have the outer one on either side, front (amber) and back (red) tapped into the turn signals.

Then middle ones in the rear could be tapped into the brake lights (red). The front middle ones you could use white, and have them on tapped from the headlights, or on an independent switch. 

 

It all depends on how much time and imagination you want to invest.

russell45 Enthusiast

russell45

Posted
  • Author
Posted

Thanks for the idea!! I didn’t even think about tapping into the turn signal !! Thank you! I will keep you up dated on this! 

BlackPaw Colorado New Member

BlackPaw Colorado

Posted
Posted
On 12/10/2019 at 4:15 PM, russell45 said:

okay you guys i know this might sound odd but i am trying to find some led lights to replace the park sensors on my new bumper. the reason is it is a bumper replacement bumper and it is only made with the holes pre-drilled and my pickup is NOT equipped with the park sensor feature. i have looked every where trying to find the size of the holes so that i can kinda narrow down my search but i am not having any luck. i am hope maybe yall have some knowledge to lend me.

 

 

thank you in advanced!!

24D1CA92-3AAB-4EF7-A1F0-9F8E60398F6D.jpeg

russell45 Enthusiast

russell45

Posted
  • Author
Posted

I am not sure. I need to measure the holes for the sensor but my pickup is in the shop right now... 

russell45 Enthusiast

russell45

Posted
  • Author
Posted

Okay, so I went and measured the holes for the rear bumper. They are 1”. So would it be best to find an led light that the housing is 1” or pretty close and has threads and a nut for the back and the head of the light be a little bigger than 1”? What do y’all think? 

CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted
13 hours ago, Mtnsackett said:

Here is another option that is duel function and there is a chrome ring to hide any rubber.

https://www.bigrigchromeshop.com/led-mini-dual-function-clearance-marker-with-bezel-p-12277.html

37969Cover.jpg

I think these might be the way to go! Size would work, and you could always paint the chrome rings if you're going painted bumper.

russell45 Enthusiast

russell45

Posted
  • Author
Posted

Yeah but what holds it in place? The body of the light which is 3/4” is what goes into the hole which is 1“.  So how does it stay in place? That outer ring just keeps it from falling all the way through. It won’t keep in secured. Correct? 

CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted (edited)
47 minutes ago, russell45 said:

Yeah but what holds it in place? The body of the light which is 3/4” is what goes into the hole which is 1“.  So how does it stay in place? That outer ring just keeps it from falling all the way through. It won’t keep in secured. Correct? 

You know what, you are correct. I hadn't noticed till you asked, but those lights don't have the locking nut behind them to hold them in place. That's my mistake. What you would need is something like these, which have a threaded back, so you would be able to tighten it against the back side of the bumper.

 

https://www.amazon.com/gp/product/B07CMN6FD5/ref=ox_sc_saved_title_7?smid=AQU08BEB4MN2K&psc=1
 

These look a little bit larger

https://www.amazon.com/dp/B07CWQZ212/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B07CWQZ212&pd_rd_w=lelbM&pf_rd_p=45a72588-80f7-4414-9851-786f6c16d42b&pd_rd_wg=9TmC9&pf_rd_r=TEFM1K3KC8J7P5GCRASP&pd_rd_r=21117b32-a1e3-456a-95e8-2e60bbb7809f&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEySkRMTEwyUkMxTThMJmVuY3J5cHRlZElkPUEwMDQ4MzAyMTMwSExJQTQ3Vlg2RiZlbmNyeXB0ZWRBZElkPUEwMjk3MDg5MjZQNk5DWktDSllMTyZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

 

 

 

Edited by CustomChevyGuy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • Another JR
      Towing In Loose Gravel

      By Another JR · Posted

      The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • XY74
      Roll up bed cover experiences

      By XY74 · Posted

      I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • Another JR
      Multigate electrical problem

      By Another JR · Posted

      The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...