Jump to content

Dash rattle around steering column

Thegraham83
 Share

Recommended Posts

Thegraham83 New Member

Thegraham83

Posted
Posted (edited)

I have a 2019 silverado new body style, i recently developed a rattle in the dash around the steering column, i took it to two dealers and both couldnt find anything. Now the warranty is up and im stuck with a rattle. I am a diesel tech so i tore apart the dash peice by peice and kept driving it around and the rattles continues. So I tightened every bolt i could see and none were loose. I even used a stethoscope going down the road and found that the rattle sounds like its coming straight from the steering column near the bottom. Maybe a bad column im not sure i attached a video of the sound, and it only happens around 45-55mph 

Edited by Thegraham83
Thegraham83 New Member

Thegraham83

Posted
  • Author
Posted

I have a 2019 silverado new body style, i recently developed a rattle in the dash around the steering column, i took it to two dealers and both couldnt find anything. Now the warranty is up and im stuck with a rattle. I am a diesel tech so i tore apart the dash peice by peice and kept driving it around and the rattles continues. So I tightened every bolt i could see and none were loose. I even used a stethoscope going down the road and found that the rattle sounds like its coming straight from the steering column near the bottom. Maybe a bad column im not sure i attached a video of the sound, and it only happens around 45-55mph 

  • 1 year later...
Palk718 New Member

Palk718

Posted
Posted

Can you try uploading the video again? I think I have a very similar issue.. were you able to figure it out?? Thanks in advance 

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 2/1/2023 at 11:24 AM, Palk718 said:

Can you try uploading the video again? I think I have a very similar issue.. were you able to figure it out?? Thanks in advance 

This is certainly not what we like to hear, Palk718.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2021 Chevrolet Silverado LT Trail Boss. To do so, please send an email to [email protected] with ATTN: Palk718/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 2/10/2023 at 6:54 PM, cdtrailboss said:

I have the exact same issue!!!! Not a problem with the truck, that rattle on my 2019 custom trailboss for me happens at ~27mph only and goes away.  Super annoying.

This is certainly not what we like to hear, cdtrailboss.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your truck. To do so, please send an email to [email protected] with ATTN: cdtrailboss/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • 1 year later...
Trail Boss 757 New Member

Trail Boss 757

Posted
Posted

Good Morning, did anyone figure out the solution to the rattling I recently purchased a 2022 TrailBoss Custom with 35K on the odometer and I get the rattling 85% of the time after taking off from a stop. It goes away when I get up around 30 mph. Any help would be greatly appreciated. Nothing wrong with the truck and how it drives but that rattling is driving me insane

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 12/30/2024 at 11:01 AM, Trail Boss 757 said:

Good Morning, did anyone figure out the solution to the rattling I recently purchased a 2022 TrailBoss Custom with 35K on the odometer and I get the rattling 85% of the time after taking off from a stop. It goes away when I get up around 30 mph. Any help would be greatly appreciated. Nothing wrong with the truck and how it drives but that rattling is driving me insane

We understand how this ongoing rattling concern can be frustrating, and we would like to take the time to investigate further on our end. To gets started, please send us an email to [email protected]. Be sure to include your Username and Forum name in the subject line with additional details. We will watch for your message. 

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Keith179
      Cold start Miss, oil in cylinder

      By Keith179 · Posted

      I’m out of ideas on this truck. 2020 Silverado 1500. 5.3 135,000 miles. Has a p0308 and p050d codes. Smokes From exhaust when cold. Compression test passed. New plugs, wires and coil on cyl 8. Same issue. New coil on 8, no change. Replaced injectors, no change. Bore scope showed oil pooled on the piston after sitting overnight. Pulled head and had machine shop check it out. No cracks. Stem seals looked good, replaced anyways. He also ground valve seats. Put it all back together and still have the same issue. Bore scope shows oil on the piston again. Leaning towards maybe a cracked ring but unsure. Cylinder looked good when the head was off, no scoring or scratches. Any ideas on what else I should look for?  Appreciate the help 
    • HeronLeal
      2021 Silverado 2.7L – N232395310 – Can someone with GM dealer access check my VIN?

      By HeronLeal · Posted

      Just want to make sure it is covered by Special Coverage N232395310 Evaporative Emission Purge Pump 2021 Silverado 1500 Custom 2.7L L3B ~100k miles I'm getting DTCs P146B and P146F. VIN 3GCPWBEK2MGxxxxxx   I spoke to a person that works at GM and he said it is not covered after checking my VIN.   Is there anyone here who currently works for a GM/Chevrolet dealership and has access to GM Global Warranty Management / Investigate Vehicle History who could explain how the VIN eligibility is determined?   thank you    
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all that information, I might purchase one and see if it will work for me, if not they may let me return it! Yes for sure the tires are definitely within limit for my truck empty, and when I do tow I'll definitely make sure to raise the rear psi for the amount of weight that's going to be on it.
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Yes exactly, more and more these days people/companies are afraid of liability issues so its easier just to say no rather than risk putting their neck on the line.    I will say with the Autel unit or when I used it last year on my truck, it wasn't like I could choose the 2025 model year or even the 2024 model year as that option was not there to manipulate the placard pressures but had to go back to 2023 or there abouts and then it showed up as an option, odd but that was how the software was then and I can't say one way or the other now as they throw out updates every so often. I still would talk to your tire dealer though to start with and they may do it for nothing but also they may have a comment on a better unit to purchase. All I know is that one of the large tire shops in my area happens to use these Autel units for their use and set them up to use the wifi and all of that jazz for constant updating because each tire tech has one handed to them by the shop but I just plugged it into my laptop to update it and yes if one is bought it has to be registered so you can get the link to do updates and then the unit has to be updated before its even used. I am not at all techy so it took me a bit but anyway just a heads up for anything you buy, most likely it will need to be connected to a computer to access the internet to have it updated to the latest software version before you can put it to use.   If your truck is near empty, those tire pressures you listed are a very safe upper range pressures to carry the weight, both the front and rear as I know they could be run lower yet with an empty truck. And if its a trailer and not some motorcycle your going to strap onto the front of your truck on a rack, you shouldn't have a need to inflate your front tires if your at 55 front already, its the rear ones that would need more air if you have much hitch weight. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...