Jump to content

Recommended Posts

Posted

I have a 2013 silverado and the front wheels lock up in 4x4 but work fine in 2wd i dont have a any codes or light on or anything, soon as i put it in 4x4 and go forward they lock up and im not sure why?!

Posted

I would start with trying to narrow down where the binding is occurring. Put the truck in 4wd, Jack it up so all the tires are off the ground and see what happens. Maybe remove the front driveshaft see if it makes a difference. 

 

Has it always done this? Tire size uniform? Are the front and rear differential ratios the same?

Posted

agreed, theres only 2 things that it could be, front differential or transfer case. put it in 4wd trans neutral ,disconnect the front drive shaft and see which end of the driveshaft you can't turn. front wheels off the ground of course. then get back to us.

Posted
2 hours ago, Brentonct said:

I have a 2013 silverado and the front wheels lock up in 4x4 but work fine in 2wd i dont have a any codes or light on or anything, soon as i put it in 4x4 and go forward they lock up and im not sure why?!

"Lock up" on a hard surface as in bind or don't move ?

  • Confused 1
Posted

thinkn about it you will need all wheels off the ground to check it. transfer case failure is more likely and far easier repair than front diff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...