Jump to content

Recommended Posts

Posted
On 4/25/2023 at 9:35 PM, mds47588 said:

I purchased the Weathertech floor liners almost immediately after getting my truck for both the front and rear seats.  While no complaints with the rear, but the fronts have both scratched the door sills to the point of needing replacement.  I am actually going to be ordering the new ones tomorrow.  It seems as if the factory GM liners won't rub against the sill plates.   Does anyone in here have them in their truck and able to confirm/deny?  

I have the GM liners. Z71 Badge. No rubbing.

  • Like 1
Posted

"Tux Mat" for me in the winter time, and carpeted floor mats in the other three seasons. Rubber mats always make me think "cheap" and this truck was not cheap....My bed is even more "trunk like", as it has a hard cover and a Bedrug.

Posted

Z71 factory liners in mine. Great fit. Last set of Weathertechs I had was in my '11 Tahoe. Fit was not great in it. 

Posted

GM Z71 mats, they do fit well. I had WeatherTech from previous truck and I swap the fronts to the WT when I know I'm going to do dirty/rough work. I like keeping the Z71 mats pristine as possible.

Posted
On 4/26/2023 at 7:50 AM, Jus Cruisin said:

I bought the GM premium all weather liners for front and rear. I've pulled them out for the summer without any damage or scratching. They are not a hard stiff rubber. The rears needed trimming to fit because I have underseat storage. Rear is 2 piece that interlock. Happy with them. 

Or have them installed under the underseat storage.

Posted
8 hours ago, redwngr said:

Or have them installed under the underseat storage.

They are designed to be cut/trimmed with markings on the backside to follow. I used heavy duty scissors to cut them. Trying to remove the underseat storage unit and getting it remounted would be a pain in the keister twice a year. I take the rubber things out as soon as the weather breaks in the early spring and put the OEM carpet ones back in. 

Posted
2 hours ago, Jus Cruisin said:

They are designed to be cut/trimmed with markings on the backside to follow. I used heavy duty scissors to cut them. Trying to remove the underseat storage unit and getting it remounted would be a pain in the keister twice a year. I take the rubber things out as soon as the weather breaks in the early spring and put the OEM carpet ones back in. 

I leave the liners in all year.

Carpeted mats that came with it are in a pile with the carpet mats for several previous trucks.

  • Thanks 1
Posted
On 6/16/2023 at 9:09 AM, redwngr said:

I leave the liners in all year.

Carpeted mats that came with it are in a pile with the carpet mats for several previous trucks.

Same here.  The carpeted mats will go back in the truck when the truck gets sold, or given to one of the kids.

  • 10 months later...
Posted

Those that have the rear GM mat. Any issues with how it snaps together in the middle over time? Wondering if they pop up at all over time and use?

 

leaning towards the GM mats in my new Silverado LTZ 

Posted
5 minutes ago, Mavsbball said:

Those that have the rear GM mat. Any issues with how it snaps together in the middle over time? Wondering if they pop up at all over time and use?

 

leaning towards the GM mats in my new Silverado LTZ 

 

 

Never had that issue with mine.  

  • Like 1
Posted

They're hard to press together in the first place and a pain to pull apart when you want to pull them out to clean them, so NO issues just popping up. I have bench seats in the front and they don't move at all.

  • Like 1
Posted

Good to hear. Anyone have thoughts on the GM vs the Westhertech HP line?

 

an employee at the dealer said go weathertech HP but I’ve heard such good things on the GM ones too and cheaper 

Posted

I've had Weathertech but prefer the material of the GM ones. It's more rubber and pliable than the stiffer plastic of the Weathertech.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Follows the motif on the Sierra EV.  Satin finsh to the lower bumper area, painted above:   Elevation       Denali      
    • Not exactly what I was hoping for, but I do like it. I wonder if they'll bring back Smokey Quartz Metallic? 🤔 https://gmauthority.com/blog/2026/06/here-is-the-all-new-2027-gmc-sierra-1500/
    • Whoever greenlighted the work truck matte black front bumpers on every trim but the AT4X should be fired!  I was hoping that was an AI mistake, but just realized they were on every model of the 2027 Silverado too.     Some parts of the interior do look premium, but the Denali Ultimate dashboard looks like an afterthought.  At least they appear to have lost the microfiber the high end Silverado models showed, but the '27 High Country dash looks better than the Denali.  
    • New member here. I am researching a read-first event-recorder concept for late-model GM V8 trucks. This is not a sales post. There is no product link, price, preorder, or mailing list. I am trying to determine whether the underlying problem is real before building anything.   Has your truck ever had a brief problem such as: - rough running or a momentary misfire - an oil-pressure warning or unusual pressure event - reduced power or a brief stall - a U-code or lost-communication problem - a symptom that disappeared before the dealer or independent shop could reproduce it   If so, I would appreciate the following details: - year, model, engine, and mileage - what happened and under what conditions - whether a DTC and useful freeze-frame data were stored - whether the shop was able to reproduce it - what the eventual confirmed repair was, if known - what additional information would have helped the diagnosis   The concept being evaluated is a removable leave-in recorder that continuously retains a rolling window from before and after an event. It would not tune, reflash, clear codes, or change the vehicle calibration.   I am also not claiming that it could predict lifter failure or see every internal ECM variable.   The real question is whether continuous event history would add enough useful evidence beyond freeze frame, GDS2, and existing scan tools — or whether it would simply be another unnecessary gadget.   For owners and technicians, which problem would make something like this genuinely useful: 1. intermittent misfire or AFM/DFM-related behavior 2. oil-pressure events 3. lost communication or electrical faults 4. none of the above Please be blunt. Negative feedback is just as useful as positive feedback.
    • No tears over the SLE and SLT trim levels disappearing but I kind of loathe the "Elevation" name. It's a truck--skip the elegance.   The slab-dashboard design is decidedly different. Almost has a Hummer flavor to it. "Professional Grade" seems to be leaning very white-collar, tech-driven these days moreso than blue-collar, functional design.   The Silverado would be my choice between the two new trucks. Pleased with the engine lineup in both. The GMC is a little "too much" for a truck, IMO, and the Denali borders on ridiculous - but I do know there are buyers for luxury trucks out there. It's just not my speed.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...