Jump to content

Accelerating - POP! - dash lights up, running rough, shifting bad, etc.

AJMBLAZER
 Share

Recommended Posts

AJMBLAZER Enthusiast

AJMBLAZER

Posted
Posted

This morning while heading to work I was accelerating onto the highway and at about 50mph I feel/hear a POP in front of me and several lights come on. Engine is misfiring and running rough.  SES light, service parking brake light, traction control off light turn on and the transmission is shifting hard. I coast off the on ramp, turn it off, and look it over. No rod sticking through the block or pan. No sign of a head gasket. Seems to be correct oil pressure when running. 
IMG_5056.jpeg.b3342853af7e5dc103f3b4fa19d1bb70.jpeg

F&$@%##}#%}} I just paid it off.

117,****** miles. Oil changed every 5,000 with synthetic and mostly highway miles. 

 

Call out of work and limp it home. 

I have an ancient scan tool and it shows P0303 cylinder 3 misfire. Reset the codes. 
 

Swap the coil to cylinder 1 and put a new ACDelco plug and wire on cylinder 3. Was planning on doing plugs and wires this coming weekend ironically.

 

Runs better but not right. Lights come back on. Now the scan tool shows P0303 and P0500 which is the vehicle speed sensor. 
 

WTH?  
It wasn’t moving this time. Where’d the P0500 code come from?
 

Going to try putting a new coil on 3 and putting the cylinder 1 pack back on 1.

 

Would love some thoughts and hell, prayers.

AJMBLAZER Enthusiast

AJMBLAZER

Posted
  • Author
Posted

It's at a shop for that.  I eliminated all the ignition related stuff.  Waiting to hear how painful it is.

  • Sad 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      Gas Prices

      By KARNUT · Posted

      I figured you would know about it.
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      It added a cost layer to an already limited production supply. True that. 
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      Swap costs and supply/demand balance. When a barrel comes out of the ground the entire range of products are present but not all at the same percentage.    Breakdown of Refined Products The following table summarizes the approximate output from a standard 42-gallon barrel of crude oil: Product Type Gallons per Barrel Percentage of Total Gasoline 20 gallons 45% Diesel Fuel 9 gallons 21% Other Products 13 gallons 31%   Most of that diesel figure is 'straight run' or cut from the barrel. Gasoline 'cut from the barrel runs 0 to 20% at the crude. So in the crude unit there is more diesel the gasoline, usually.  The full refining experience however gives the tabled values. Ego there is half the diesel than gasoline after the 'first crack' That could be an FCC unit, or Isomax or....   Those units take heavy products and break the big ones into little ones. Those numbers are harder to get hold of but directionally it ends up the same.    Really light products are very profitable. Ethylene and Propylene to name two. Those are cracked from slightly heavier feeds like NG and Propane and Ethane. The cracker harshness determines the feed for distillation. Those feeds come from less profitable products like diesel and gasoline.    So...there is a swap cost. How much market is there TODAY and what crude am I running TODAY..... what is my process capable of always.    There is this as well. The USA uses allot more gasoline than it does diesel so in the cracker the process is tilted to gasoline production which....limits supply of diesel. OTR uses the most and it has different requirements than automotive and agricultural.  Limiting auto products.    You are correct however. It is less refined, just less of it. Allot less. 
    • Grumpy Bear
      Transmission Temperature Hitting 220s

      By Grumpy Bear · Posted

      Most thermostatically controlled ATF systems use a 'wax' pill just like the one in your water thermostat. They work on the expansion volume of the wax and the pill is constructed in such a way as to limit the travel to remain within that range. This means it has an opening temperature often called the 'cracking temperature' and a fully open temperature. For whatever reason oil is designated by it's fully open temperature and water by it's cracking temperature.    Between the two it the "Regulating Temperature" The entire range is about 20 F from closed to open. In your example the lower limit, opening point of 145 F then has a fully open temp of 165 F and a throttling temperature of 155 F.    Thing is, the throttling temperature needs two things to work properly. Enough system load high enough to reach the minimum and a heat sink (cooler/exchanger) large enough to prevent any load applied from exceeding the fully open temperature.    If your system exceeds the fully open temperature it is screaming MORE COOLER.    Here is the silly part of the whole thermostat system where the oil is cooled/heated by the radiator. Nothing is flowing to that system until the oil temperature reaches the cracking temperature unless it is equipped with a minimum flow bypass orifice or a bypass built into the seating surface of the plunger. That system meant to get it up to temp quicker isn't doing a thing until WORK drives if from ambient to cracking temp. One a cold winter day, like zero F, it may never get hotter than about 110 F. Sometimes not even that.    People forget or are young enough to not know that until this millennia transmissions were cooled by the radiator cold tank alone and without a thermostat at all.  In the 50's they weren't even cooled. OEMs learn everything the hard way.    When an OEM tells you the trans "Works best" between 175 F and 220 F it means works best for THEM. The transmission thermostat is fuel play. If you watch you trans temps like I do you will learn that it may take a hundred miles if you are not towing and not driving more than say 55-60 mph on a zero F day to even reach 120 F and it might sit there all day if it's colder. Yet if functions perfectly over about 100 F. It may need to get a bit warmer for the fuel and spark maps to go without an multiplier.    Worry more about too hot. Use a cooler large enough to put that thermostat in range.         
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      Around 2008 if memory serves they took sulfur out. That was when diesel went up. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...