Jump to content

Does new 5.3 burn oil?


bogeypro

Recommended Posts

Posted

Don't know which trucks ur talkin about. I owned an 84 3/4 ton, dad owned a pile of old Chevys. Never burnt any oil, the old 305's and 350's wouldn't burn any oil until like 200k lol...if they did it was just abuse.

 

This is 2013, if they can figure out how to get a reliable 400hp out of a small block Chevy from factory, have all kinds of crazy technology built into these trucks but they can't figure out how to stop burning oil?? Are you kidding me???

 

I don't care what anybody says, I would never ever spend cash on something that burns oil. The whole "gm says it's acceptable" thing is a wad of BS. Doesn't take a brainiac to figure out somebody is getting swindled and it sure isn't GM!! It's the poor sucker paying 50k for a brand new nice looking beauty lookin Chevy but oh jeez it burns oil LOL....oh but it's ok...it's acceptable

Manufacturers are stating acceptable oil consumption across the board in various engines and applications. It's not limited to trucks or the 5.3 engine. They don't care what an old 350, 305, 318, 351, yada, yada, yada, did. They are stating this to CYA. One quart every 3-4000 miles has been what was a "rule of thumb" for years, but now that oil change intervals have lengthened, people notice the drop in oil, and manufacturers are having to state the accepted consumption rate so they don't have liability issues if some fool has a failure because they were low on oil.

 

It's a mystery to me, as well, but I don't recall any other 5.3 engines with oil consumption issues other than the 5.3 with aluminum block and AFM that kinda started this mess. Not sure about other AFM engines in the GM stable, at least not getting the attention that one did. Check the Ford and Chrysler forums or just do a search. It's not just GM saying this.

  • Replies 119
  • Created
  • Last Reply
Posted

GMs 5.3 is not the only motor to burn oil. My borther inlaws Audi burns 1 quart every 4k and Audi has stated it is normal. Also my buddies 07 5.3 non AFM uses a quart every 3 to 4k also.

Posted

I've got 4200 miles on my truck and it still shows full as well. Like others have said, it may be much later before an issue arises. I believe the 5.3 that started this didn't develop this until around 30,000 miles or so, from what owners have said.

Posted

I understand that GM did some upgrades on the oil burning engines in the GMT900 series.

At least for engines where the problem occurred.

 

We can only hope that GM solved the problems for good and has now a strong, fuel efficient and reliable engine to offer.

 

so long

j-ten-ner

Posted

I understand that GM did some upgrades on the oil burning engines in the GMT900 series.

At least for engines where the problem occurred.

 

We can only hope that GM solved the problems for good and has now a strong, fuel efficient and reliable engine to offer.

 

so long

j-ten-ner

 

 

Ya for sure. For those that do not know about the oil consumption on the 5.3, here is the thread in the 900 section. some are using the range to turn of AFM and catch can for back up....not sure AFM can be blamed for oil consumption.......by the way mine is on an oil consumption test and it started burning around 50,000...but I did not double check the full fill last change so this time will tell if really burning oil.

 

http://www.gm-trucks.com/forums/topic/127812-is-your-gmt-900-truck-or-suv-using-oil/page-25

Posted
I guess we can always hope for the best. Do other manufacturers have this kind of acceptability of oil consumption on their vehicles? Maybe these new EcoTec3 engines won't burn oil, but GM wants to CYA for now. Thing is, if it burns that much oil, it's not very "ECO" friendly, is it?

 

Yes. I forget offhand what the amount is but in our Toyota van manual it has a consumption acceptability limit. I can tell you this it is higher than GM

 

 

Ryan

Posted

So the service writer told me to bring my truck in for an oil change when the readout says 25% because the dextrol oil it takes is only a semi synthetic. I've got 6000 miles and showing 23%. If that's the oil the truck calls for then why isn't 25% remaining 0%? Btw I don't usually run full synthetic over 7000 miles typically try for 5000 but it ends up someplace between the two. By the time the readout would say 0% I would have 7500 miles on a semi synthetic.

Posted
Don't know which trucks ur talkin about. I owned an 84 3/4 ton, dad owned a pile of old Chevys. Never burnt any oil, the old 305's and 350's wouldn't burn any oil until like 200k lol...if they did it was just abuse.

This is 2013, if they can figure out how to get a reliable 400hp out of a small block Chevy from factory, have all kinds of crazy technology built into these trucks but they can't figure out how to stop burning oil?? Are you kidding me???

I don't care what anybody says, I would never ever spend cash on something that burns oil. The whole "gm says it's acceptable" thing is a wad of BS. Doesn't take a brainiac to figure out somebody is getting swindled and it sure isn't GM!! It's the poor sucker paying 50k for a brand new nice looking beauty lookin Chevy but oh jeez it burns oil LOL....oh but it's ok...it's acceptable

Manufacturers are stating acceptable oil consumption across the board in various engines and applications. It's not limited to trucks or the 5.3 engine. They don't care what an old 350, 305, 318, 351, yada, yada, yada, did. They are stating this to CYA. One quart every 3-4000 miles has been what was a "rule of thumb" for years, but now that oil change intervals have lengthened, people notice the drop in oil, and manufacturers are having to state the accepted consumption rate so they don't have liability issues if some fool has a failure because they were low on oil.

 

It's a mystery to me, as well, but I don't recall any other 5.3 engines with oil consumption issues other than the 5.3 with aluminum block and AFM that kinda started this mess. Not sure about other AFM engines in the GM stable, at least not getting the attention that one did. Check the Ford and Chrysler forums or just do a search. It's not just GM saying this.

 

The 6.2 camaro (automatic) has AFM. Don't hear much about oil consumption in the L99 engine at least on the other forums I am on

 

 

Ryan

Posted

6000 miles on mine now and it's 1/4 way up the hatch marks of the dipstick. (1/2 way is full)

 

On my 09 top of hatch marks, top hole is full. Did they change something?

Posted

Hello,

 

I understand that you are curious about if any fellow member have run into oil consumption issues but are you having any vehicle issues? If so, I am happy to assist. If I can be of any assistance, please private message me including your contact information, VIN, exact mileage, and preferred dealership.

 

Regards,

 

Jennifer T.

GM Customer Care

Posted

6000 miles on mine now and it's 1/4 way up the hatch marks of the dipstick. (1/2 way is full)

You've lost me.

Or are you just an optimist? Like "the glass is half full"? :)

 

The engine used oil already?

 

so long

j-ten-ner

Posted

Sorry I lost you there j-ten-ner, what I should have said is, I thought that when I checked my oil when it was new it read right in the center of the cross hatch. Now it reads 1/4 way up the cross hatch. Yes it has burned some oil. Now you got me second guessing where the oil level was when new, either way it's burned oil. And as you can see from my fuelly average I don't push it hard at all.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...