Jump to content

Recommended Posts

Posted
Gorgeous looking rig...could you please give some details on lift,tires, and wheels..Thanks 
Thanks. Readylift 7 inch lift, with bilstein 5100s front and rear, 20x10-19 Hostile Rage H113 wheels, 35x12.50 Nitto Ridge Grapplers. I also just installed a zone add a leaf to the rear because the front was an inch higher than the rear.

Sent from my SM-G975U using Tapatalk

Posted
On 2018-05-25 at 7:04 PM, TXGREEK said:

3b31bd5c028269b359ac8a36a0a5b897.jpg


Sent from my iPhone using Tapatalk

I’ve been going through these pics from page 1, and must say you did a mighty fine job with your truck sir...very tastefully done ✅.  The black wheels really get that white paint to “ pop “ !

may  I ask what brand wheel, size, and tires please ?

Thank you,

Posted
I’ve been going through these pics from page 1, and must say you did a mighty fine job with your truck sir...very tastefully done [emoji736].  The black wheels really get that white paint to “ pop “ !
may  I ask what brand wheel, size, and tires please ?
Thank you,


Thank you, I believe it was leveled there with Fuel 20x9 +1 offset, wrapped with 275/60/20 KO2’s.
Currently, CST 4.5-5” lift with same wheels but wrapped with 295/60/20 (34”) Nitto Ridge Grapplers


Sent from above
Posted
On 3/13/2018 at 5:42 PM, chrisss214 said:

Bought her September 2016, I also recently got flowmasters installed with two pipes running out the back at an angle

bce46e4b03795fcdad310989da6b9fae.jpge450b4d2c6727646be5982b2652ed831.jpg


Sent from my iPhone using Tapatalk

What set up are you running? Leveling kit? Tire size?

  • 1 month later...
Posted
On 12/7/2014 at 12:56 PM, langston1726 said:

Lots a good looking trucks. Keep em coming.

 

Blacked out my bowtie yesterday.

 

af0510b74439ce124196bc9a10f5b349.jpg

 

7bfebd66f494008d0778d03ef26a3439.jpg

 

 

Sent from my iPhone using Tapatalk

What tires on these? .....my bad it you've posted it already. thanks!

Posted (edited)

Just purchased it this week! 2016 5.3...pumped to start the changes! Have my 2" leveling kit coming, LEDs for the back lights, black 3m for the bowties, and wheels/tires soon....A lot of great looking trucks in the thread, definitely love seeing all the different set ups for ideas ??

F63CC95F-C6FD-47A1-9298-DDDFBAAA8340.jpeg

Edited by Joe_IN
  • Like 1
Posted

My 2018 Silverado. bb257552d18de2322dd765f3d4490fda.jpg89ce78248a70513891f75f1cd1c81a02.jpg


Sent from my iPhone using Tapatalk

  • Like 2
Posted
35 minutes ago, jgraves13 said:

 


I like your taste, what's the setup?

5785412451a8eb91e15f312477b69649.jpg


Sent from my iPhone using Tapatalk

 

You too buddy! I have 18x9 NVs w/ 285/65/18 KO2s if I remember correctly. I think it works out to about a 32.5". Do you have Kings on yours? I see sort sort of reservoir in there.

  • Like 1
Posted
You too buddy! I have 18x9 NVs w/ 285/65/18 KO2s if I remember correctly. I think it works out to about a 32.5". Do you have Kings on yours? I see sort sort of reservoir in there.


Yep, they're Kings!


Sent from my iPhone using Tapatalk
Posted
30 minutes ago, jgraves13 said:

 


Yep, they're Kings!


Sent from my iPhone using Tapatalk

 

Nice! I have em too. Probably the best investment I've made in the truck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Whoever greenlighted the work truck matte black front bumpers on every trim but the AT4X should be fired!  I was hoping that was an AI mistake, but just realized they were on every model of the 2027 Silverado too.     Some parts of the interior do look premium, but the Denali Ultimate dashboard looks like an afterthought.  At least they appear to have lost the microfiber the high end Silverado models showed, but the '27 High Country dash looks better than the Denali.  
    • New member here. I am researching a read-first event-recorder concept for late-model GM V8 trucks. This is not a sales post. There is no product link, price, preorder, or mailing list. I am trying to determine whether the underlying problem is real before building anything.   Has your truck ever had a brief problem such as: - rough running or a momentary misfire - an oil-pressure warning or unusual pressure event - reduced power or a brief stall - a U-code or lost-communication problem - a symptom that disappeared before the dealer or independent shop could reproduce it   If so, I would appreciate the following details: - year, model, engine, and mileage - what happened and under what conditions - whether a DTC and useful freeze-frame data were stored - whether the shop was able to reproduce it - what the eventual confirmed repair was, if known - what additional information would have helped the diagnosis   The concept being evaluated is a removable leave-in recorder that continuously retains a rolling window from before and after an event. It would not tune, reflash, clear codes, or change the vehicle calibration.   I am also not claiming that it could predict lifter failure or see every internal ECM variable.   The real question is whether continuous event history would add enough useful evidence beyond freeze frame, GDS2, and existing scan tools — or whether it would simply be another unnecessary gadget.   For owners and technicians, which problem would make something like this genuinely useful: 1. intermittent misfire or AFM/DFM-related behavior 2. oil-pressure events 3. lost communication or electrical faults 4. none of the above Please be blunt. Negative feedback is just as useful as positive feedback.
    • No tears over the SLE and SLT trim levels disappearing but I kind of loathe the "Elevation" name. It's a truck--skip the elegance.   The slab-dashboard design is decidedly different. Almost has a Hummer flavor to it. "Professional Grade" seems to be leaning very white-collar, tech-driven these days moreso than blue-collar, functional design.   The Silverado would be my choice between the two new trucks. Pleased with the engine lineup in both. The GMC is a little "too much" for a truck, IMO, and the Denali borders on ridiculous - but I do know there are buyers for luxury trucks out there. It's just not my speed.
    • Your safety is of utmost importance, @joshua1221, and we understand the importance of having all your lights working in your truck. If you have not already, we highly encourage you to bring your concerns to the attention of your local GM dealer. They are in the best position to diagnose your concerns as well as confirm the compatibility of the mirrors with your truck. Additionally, we would like the opportunity to explore any way we may be of assistance. When you have a moment, please visit: https://s.gm.com/support-request and fill out the support request form with all pertinent details. This form helps our team gather the right information and ensures your request is routed appropriately.
    • - I like the outside but not as much as the Chevrolet.  They ICE'd the EV styling and it works, but I think exterior goes to Chevy on this one.     - SLE and SLT dead = Not.  Surprising.  Fits into the rest of the GMC lineup like this which (aside from Pro) matches the rest of the family.  Elevation, AT4, Denali.     - Interior.  Sophisticated Malaise era.  Why do I say Malaise?  Drawn with a ruler.  Rectangles everywhere.  Looks very premium though.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...