Jump to content

Recommended Posts

Posted

Sorry, but my observations put me in the other camp. I do blame foreign manufacturing as part of the problem. Sometimes it is a design issue that causes the problem.

 

What really pisses me off is they "GM, Ford etc" use these cheaper to produce parts, but DO NOT pass on the savings to the consumer. The prices of cars and trucks should get cheaper with the stagnate wages, and cheaper parts.

 

:cheers:

  • Like 1
Posted (edited)

Sorry, but my observations put me in the other camp. I do blame foreign manufacturing as part of the problem. Sometimes it is a design issue that causes the problem.

 

What really pisses me off is they "GM, Ford etc" use these cheaper to produce parts, but DO NOT pass on the savings to the consumer. The prices of cars and trucks should get cheaper with the stagnate wages, and cheaper parts.

 

:cheers:

That's exactly what irritates me too. Where are the savings? I spent almost $ 30 to buy a license place light housing and lens for my truck from the local dealer and the stupid thing broke again in one year! The clips on its plastic body are too weak and they break. The part is a piece of junk and it is made in China. I bet the true manufacturing cost is about a dollar per part. And they have the nerve to ask $ 30 for this thing? It is the little black plastic housing with a lens on either side of the license plate on your rear bumper. After the second one broke, I bought an aftermarket one from Dorman, $ 9 shipped. Much better quality and has not broken yet. Another outrageously priced part was the tow harness receptacle made of plastic, for which GM wants almost $ 60! A two dollar part made in Mexico. I found an aftermarket one for $ 17 shipped and it looks exactly like the GM one, probably made in the same plant in Mexico.

Edited by pm26
  • Like 1
Posted

My Dad until recently wqs an interior designer at the tech center...he know works for another major manufacturer.

 

Foreign made parts are a huge problem...theyve had to reject train loads of parts...wrong materials used etc.

 

The foreign designed parts are even worse.

 

It is not all of the problems but it is a huge part.

  • 1 year later...
Posted

I have a 2014 Silverado 1500 w/5.3L, and my AC compressor went out this week at 40,400 miles. I called GM to put in a claim and the tech stated that the AC compressors are back ordered for several months at this time. Also, if the claim is approved, GM will pay for the parts, not the labor. Will let you know how that goes.... I am hoping GM puts in a recall for this issue as many people have been experiencing this. Total cost for repair is going to be around $1,000. I am extremely frustrated that it went out at such low miles. I really hope the new compressor is better quality and is free of whatever defect is causing these compressors from the factory to lock up on us.

 

Background: I was driving down the road only 5 minutes from the house and heard a belt screeching under the hood which quickly went away. Once I got home I found the belt between the AC compressor and the crank pulley was totally destroyed. I put a new stretch belt on using zip ties (easy) and then noticed the clutch on the compressor would not engage. I checked the fuses, none were blown. I bought some refrigerant thinking maybe it wont engage due to the refrigerant level being to low, that didn't work either. I then took it to the dealer who confirmed the compressor was frozen.

Posted

Picture of the belt destroyed, laying on the plastic and the rubber everywhere.

post-153978-0-15783300-1505485128_thumb.jpg

post-153978-0-15783300-1505485128_thumb.jpg

post-153978-0-15783300-1505485128_thumb.jpg

post-153978-0-15783300-1505485128_thumb.jpg

  • Thanks 1
Posted (edited)

$120 later, the problem is solved.

 

Or do it "the right way" and swap the A/C pump yourself , then pay some shop $200 to put $5 worth of coolant into the A/C system for you.

 

Here are the parts:

 

 

 

http://www.ebay.com/itm/2014-Silverado-1500-A-C-AC-Compressor-OEM-39K-Miles-LKQ-144870616-/362077623220?hash=item544d8213b4:g:DcwAAOSw3GFZm8F-&vxp=mtr

 

http://www.ebay.com/itm/A-C-Recharge-Kit-14oz-R-134A-With-Trigger-Valve-Recharge-Hose-R134A-Refrigerant-/181294164436?hash=item2a35f969d4:g:OjQAAOxyoA1RR194&vxp=mtr

Edited by starman8tdc
  • Like 1
  • 2 weeks later...
Posted

GM denied my claim that I filed directly with them. I then filed a complaint with the Better Business Bureau, which they also denied. I have now opened a complaint with the Michigan Attorney General. Will see what comes of this.

  • Like 1
  • 1 year later...
Posted
This is how my Monday started. The ac compressor on my 2014 Silverado 117,000 miles.bc95071651c246e642872cb65fdcc969.jpg2ee9425b44e655254a1ab937799945bd.jpgc63926425ec0dad397acb1bccee5771d.jpg
 
 
Sent from my iPhone using Tapatalk
 
 
Lasted much longer than mine did. My 2014 Silverado lost its compressor at 38k. Same sort blow out. Cost $1200 to fix.

Sent from my SM-G960U using Tapatalk

  • 8 months later...
Posted

how to make a pole to see how many compressors go out compared to leaky condensers? Emeralado's compressor went out today in a stink of glory. Maybe it will get my mine of the shakes.

 

Posted
On 9/15/2017 at 7:20 PM, starman8tdc said:

$120 later, the problem is solved.

 

Or do it "the right way" and swap the A/C pump yourself , then pay some shop $200 to put $5 worth of coolant into the A/C system for you.

 

Here are the parts:

 

 

 

http://www.ebay.com/itm/2014-Silverado-1500-A-C-AC-Compressor-OEM-39K-Miles-LKQ-144870616-/362077623220?hash=item544d8213b4:g:DcwAAOSw3GFZm8F-&vxp=mtr

 

http://www.ebay.com/itm/A-C-Recharge-Kit-14oz-R-134A-With-Trigger-Valve-Recharge-Hose-R134A-Refrigerant-/181294164436?hash=item2a35f969d4:g:OjQAAOxyoA1RR194&vxp=mtr

ah thanks. will read.

  • 1 year later...
Posted
On 6/15/2016 at 6:00 PM, TxTruckMan said:

You're welcome. My opinion added as much to the discussion as your complaining did.

Ya u and tnchevy sound like salesmen that will say anything to keep a good face whether or not its true. Now thats its year 2021 and lawsuits pending against gm for sooo many messed up ac compressors and condenser from shoddy design flaws to shoddy parts, maybe shouldnt be so quick to doubt people who obviously can sight a trend more so than yourselves.

  • 1 year later...
Posted (edited)

Bad compressor here. Not me because I dont drive a @#)& box. Maybe if Chevy, focused more on building cars and less on %#(^(& on their customers in this thread pretending they are "chevy truck man", they wouldnt need a $500 billion bail out. Like your first clue was your obvious %*#$ box was built in Detroit and Mexico.  T. Subaru @350k miles w compressor going strong. Kaizen style. DAB ON THIS THREAD FR FR, No Cap, Dead homies. On god,Im Dead @$$. Like oh surprise surprise this guy just $(%^% on his customers with a made in mexico compressor that whent 30k miles and now he's here to %#$)(# on you some more because he works for Chevy customer control not Quality control. There is none.

Edited by SmokerX
I hate the antichrist.
  • Confused 1
Posted
2 hours ago, SmokerX said:

Bad compressor here. Not me because I dont drive a @#)& box. Maybe if Chevy, focused more on building cars and less on %#(^(& on their customers in this thread pretending they are "chevy truck man", they wouldnt need a $500 billion bail out. Like your first clue was your obvious %*#$ box was built in Detroit and Mexico.  T. Subaru @350k miles w compressor going strong. Kaizen style. DAB ON THIS THREAD FR FR, No Cap, Dead homies. On god,Im Dead @$$. Like oh surprise surprise this guy just $(%^% on his customers with a made in mexico compressor that whent 30k miles and now he's here to %#$)(# on you some more because he works for Chevy customer control not Quality control. There is none.

 

 

This has to be up there as one of the most epic first posts I have ever read. Now if I could only figure out what it says. I think this may be a perfect example on why not to consume way too many adult beverages before posting...

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...