Jump to content

Recommended Posts

Posted

 

Can you confirm that part fits 5.3L with trans cooler?

Yep. 5.3 and 6.2 use identical condenser / trans cooler. The V6s use part # 4282 which itself is identical to the V8 part, except it is missing the trans cooler portion.

Posted

is there anyway to tell if my condenser is going to be affected? any telltale signs?

Posted

is there anyway to tell if my condenser is going to be affected? any telltale signs?

The sign is either a "GMC" or bow tie on your grill.

  • Like 2
Posted

I just called about my case with chevy, the lady said that the part was on national backorder. I went into a whole lecture with the lady about why the demand was so high and that the original product was inferior on a $40,000 vehicle. I asked if her husband pulled up to take her out on a date in a truck with no ac would she be excited. She said one of her clients was still waiting for the part from march. I informed her that if I was still waiting from march, I would drive my truck back to the dealer, throw them my keys and demand my money back. I said if I am stuck with the $1400 repair this will be the last chevy I ever purchase.

Posted

Perhaps the question to ask the service advisor is how is GM going to fix this issue? Really it's not the service advicors fault and going off on them doesn't do much. Frankly I think GM should offer a goodwill repair for everyone up to 8 yr/100K miles. It's insulting to then charge those parts and labor after having to wait months for a part to be redesigned and produced.

 

I just called about my case with chevy, the lady said that the part was on national backorder. I went into a whole lecture with the lady about why the demand was so high and that the original product was inferior on a $40,000 vehicle. I asked if her husband pulled up to take her out on a date in a truck with no ac would she be excited. She said one of her clients was still waiting for the part from march. I informed her that if I was still waiting from march, I would drive my truck back to the dealer, throw them my keys and demand my money back. I said if I am stuck with the $1400 repair this will be the last chevy I ever purchase. [/size]

Posted

Perhaps the question to ask the service advisor is how is GM going to fix this issue? Really it's not the service advicors fault and going off on them doesn't do much. Frankly I think GM should offer a goodwill repair for everyone up to 8 yr/100K miles. It's insulting to then charge those parts and labor after having to wait months for a part to be redesigned and produced.

 

I told the lady that im not blaming her. She said t hat she would be upset too.

Posted

My 2016 silverado's ac just went out. Only 8,800 miles on it, had it for less than a year. Will be getting it fixed than trading the truck in. Already had the torque converter replaced last month.

Posted

My 2016 silverado's ac just went out. Only 8,800 miles on it, had it for less than a year. Will be getting it fixed than trading the truck in. Already had the torque converter replaced last month.

 

I'd trade it in now, you're going to be waiting a long time for the new condenser.

Posted

 

I'd trade it in now, you're going to be waiting a long time for the new condenser.

Yeah, I found a Ford dealership that also owns a Chevy dealership so they will buy it with it broken.

  • Like 1
Posted

Guys how long does it take to leak out if you fully recharge the system? If it is weeks why would you not just recharge it a couple of times and drive happy knowing that GM is redesigning the part and will have a part that will last the life of the vehicle soon? Now if it is a BIG leak and only lasts hours or a couple of days that would be a different situation. Just curious what size leak we are dealing with here????

Posted

I could fill mine up on Sunday and it would be ready for a recharge again on Wednesday night. I have good air now but who knows how long the aftermarket condenser will last?

Posted

Guys how long does it take to leak out if you fully recharge the system? If it is weeks why would you not just recharge it a couple of times and drive happy knowing that GM is redesigning the part and will have a part that will last the life of the vehicle soon? Now if it is a BIG leak and only lasts hours or a couple of days that would be a different situation. Just curious what size leak we are dealing with here????

 

It took about a week after they recharged it to fail again

Posted

depends how big the leak is. most of the time it's only a few days. There's also been problems with the lines coming out of the compressor. those are on backorder too.


depends how big the leak is. most of the time it's only a few days. There's also been problems with the lines coming out of the compressor. those are on backorder too.

Posted

This Wed my truck (2015 with 44k miles) starts blowing warm air. I've got an appt with the local dealership Thurs morning for an oil change (coupon is less than what I can buy oil and filter for) and an error message so timing is somewhat good. They tell me my condenser went out and and the bad new is it's nationally back-ordered and the good news is they have one. Cost is $1400 and they can get it done. A good buddy of mine has an Auto A/C shop and does all my work but it's frickin hot and humid in SW Florida so I just had the dealership do it. I'm too busy to run around and need the truck this weekend to pull the boat. Picked it up this morning and it's nice and cold again. If it happens again I'll look at an aftermarket one if time permits.

 

Still have my old 2005 Tahoe with 225k miles and the original condenser.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...