Jump to content

Recommended Posts

Posted (edited)

$1400 sounds pretty high. But AC work seems to be very high compared to other service. That's the main reason I bought all the equipment to service AC myself about 10 years ago. The cost of the gauges, vac pump, and other miscellaneous tools is way less than many places bill you to re-charge a system.

 

It hasn't been all roses though. I've had my share of learning mistakes where I've replaced parts that didn't need it. This latest work on my K2 is an example. I chased the leak based on internet chatter about the lines. I bought all new lines, then noted that the compressor had been superseded due to problems I was seeing on the net too. So, I thought it may be the compressor. I even vacuum checked the condenser and evaporator with an isolation plate I made. They both vacuum checked fine. That's why I thought it was something other than the condenser and evaporator. Only after I had changed the lines and compressor and it didn't hold a charge for more than a few days did I re-check the evaporator and condenser with my adapter, using high pressure instead of vacuum. That revealed the condenser leak.

 

So, I've spent more on parts than I needed to. Probably $500 more this time around. Still with the $500 for the new compressor and lines, plus the $240 I paid for the condenser, I'm sitting pretty well inside the going rates for a condenser replacement, plus I have an almost completely new, latest configuration, system, except for the evaporator. Of course, I spent a bunch of time working on it. No free lunches...I guess.

Edited by spurshot
Posted

Just traded my silverado in for a 2017 Ram Power wagon. Just too many problems and dislikes with the silverado.

Posted

Just traded my silverado in for a 2017 Ram Power wagon. Just too many problems and dislikes with the silverado.

If I ever got a non-GM truck, the Power Wagon would be my first choice. Probably the most practically configured vehicle ever.

  • Like 2
Posted

$1400 sounds pretty high. But AC work seems to be very high compared to other service. That's the main reason I bought all the equipment to service AC myself about 10 years ago. The cost of the gauges, vac pump, and other miscellaneous tools is way less than many places bill you to re-charge a system.

 

It hasn't been all roses though. I've had my share of learning mistakes where I've replaced parts that didn't need it. This latest work on my K2 is an example. I chased the leak based on internet chatter about the lines. I bought all new lines, then noted that the compressor had been superseded due to problems I was seeing on the net too. So, I thought it may be the compressor. I even vacuum checked the condenser and evaporator with an isolation plate I made. They both vacuum checked fine. That's why I thought it was something other than the condenser and evaporator. Only after I had changed the lines and compressor and it didn't hold a charge for more than a few days did I re-check the evaporator and condenser with my adapter, using high pressure instead of vacuum. That revealed the condenser leak.

 

So, I've spent more on parts than I needed to. Probably $500 more this time around. Still with the $500 for the new compressor and lines, plus the $240 I paid for the condenser, I'm sitting pretty well inside the going rates for a condenser replacement, plus I have an almost completely new, latest configuration, system, except for the evaporator. Of course, I spent a bunch of time working on it. No free lunches...I guess.

Even though it was all a lot of work and expense and all,you felt pretty good when you were done and it worked as it's supposed to,huh? I've done very similar with both my Burbs and having good A/C in wifey's Burb is mandatory lol,cuz we all know what happens if wifey ain't happy :)

Posted

Gary, good to hear from you. And over on the "electronic truck" forum too! LOL

 

Yeah gotta keep wifey happy. We took my truck up to Paso Robles back in April or May with the AC inop. Even with only 80f highs, she gave me the evil eye.

 

Fixing any problem and even maintenance is gratifying. I just did the front brakes on the Camaro. I don't do my wife's car maintenance. She has a mechanic she trusts. In rare cases I'll work on her cars. It's not just about saving money, its therapy for me. When it gets to where I don't get that feeling of satisfaction, I'll pay for it to be done.

Posted

I'll bet going 80 an no A/C you probably had the windows down,that couldn't have been good for her hair do.That's where the evil eye comes in lol.

Posted

2014 and the condenser went at 72000km. Called GM customer service and they said they would cover 25%. I have had countless issues with my truck that I am selling it and getting a Toyota, my brother has been a mechanic for 19 years and seen it all and he recommended from when I was looking for trucks " get a Toyota I never see problems" wish I would of listened.

  • Like 1
Posted

You and your brother need to read all the complaints about the new Tacoma. Bad rear diffs with a 3-4 month wait to repair.

www.tacomaworld.com

 

2014 and the condenser went at 72000km. Called GM customer service and they said they would cover 25%. I have had countless issues with my truck that I am selling it and getting a Toyota, my brother has been a mechanic for 19 years and seen it all and he recommended from when I was looking for trucks " get a Toyota I never see problems" wish I would of listened.

  • 2 weeks later...
Posted

Damn I got the a/c leak virus!!! And I live in Houston!!! I haven't taken anything apart yet, i still had a bit of pressure the first time I started getting hot air, so I just added more refrigerant. The second time I went to auto zone and "borrowed" their manifold gauges and vacuum pump. The system held vacuum for about an hour. So I recharged it. Lasted a week. Now I went to harbor freight (I think I'm starting to like that store) and bought the gauges to be able to see what's going on. Tomorrow I'll be pulling vacuum to see what happens, but I feel like if it is the condenser, I might be able to hold vacuum again... is this a good hypothesis?

 

2015 Texas edition, 37,000 miles. No extended warranty. I feel like I could give this repair a try, I'm inclined to turn wrenches and know a bit about HVAC, so I'll start looking into it. But I'm so disappointed in GM. I always wanted a Chevy truck, but not like this.

Posted

Sorry to share the bad news, but a new condenser is probably in your near future. Recommend you find a quality aftermarket piece.

Posted

New Condenser

 

This is the aftermarket condenser that my Chevy dealer installed under warranty. They asked first before they installed the aftermarket if I was okay with aftermarket. It does have quite a bit more meat where the trans cooler is mounted to the condenser. Should be a little better than factory anyway. He told me that they got 9 condensers in on Friday before I was at the dealer. I was there on Monday morning and they only had 3 left. I took the aftermarket and have been happy ever since.

Posted

Damn I got the a/c leak virus!!! And I live in Houston!!! I haven't taken anything apart yet, i still had a bit of pressure the first time I started getting hot air, so I just added more refrigerant. The second time I went to auto zone and "borrowed" their manifold gauges and vacuum pump. The system held vacuum for about an hour. So I recharged it. Lasted a week. Now I went to harbor freight (I think I'm starting to like that store) and bought the gauges to be able to see what's going on. Tomorrow I'll be pulling vacuum to see what happens, but I feel like if it is the condenser, I might be able to hold vacuum again... is this a good hypothesis?

 

2015 Texas edition, 37,000 miles. No extended warranty. I feel like I could give this repair a try, I'm inclined to turn wrenches and know a bit about HVAC, so I'll start looking into it. But I'm so disappointed in GM. I always wanted a Chevy truck, but not like this.

Get a flashlight and peer through the grill to get a look at the condenser. If there is a leak, you should see a wet oily area near where the leak is. Mine was on the driver's side up at the braze/weld where all of these condensers seem to have the leak...

  • Like 1
Posted

The aluminum colored aftermarket condensers would bother me on an all black truck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   5 Members, 0 Anonymous, 1,664 Guests (See full list)


  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...