Jump to content

Recommended Posts

Posted

The issue seems intermittent as the noise is not present every time the defroster is turned on, at least in my case.  I have kids in the back as well and I would hate for the window to pop when they are in the truck with me.  Does anyone have a wiring diagram or other information on the defroster circuit through the window assembly?  I have not taken a hard look at it, but it looks like the path through the window may be hidden in the trim.

  • 4 weeks later...
Posted

This just happened to my 2017 Silverado!  Driving home from work in a snow storm.  Nobody around, no snowblowers.  I heard a loud pop and thought my tire blew.  After a few hundred more yards and some cold air I realized half my back window was gone.  First pass at the dealership wasn't very successful.  Need to find somebody else to talk to there as apparently this happens.  My defroster probably was on and I did smell a bit of burning after, but not much.

Posted

Same exact thing happened to my 2016 sierra denali hd

The dealer is saying they see a point of impact and that caused the window to shader and smoke. Its BS the window had NO damage and im sure that "point of impact" that just so happens to be right where the contact wires are is from the over heating while auto started. They know i have full cover so send me to a glass place for my insurance to cover (it does) but i want to prove it wasn't caused by impact because GMC needs to take responsibility!

Posted
On 2/24/2018 at 2:56 PM, Paul Wojcicki said:

I just got a call from the dealer and they replaced the entire rear window assembly but have no reason as to why it happened. I do want to know why so it wouldn't happen again but mine was fully replaced under warranty no questions asked 

 

Hi Paul, I have the same truck. This morning, I saw smoke coming out of the window so I turned off the defroster. I am going to schedule a service appointment to have them check it out.  I turned off the defroster before the window exploded. Any advice for when I contact the dealer? Anything specific they should be looking for?

Posted

Im glad ur GMC dealer was helpful! Roseville MN GMC tried to tell me the window got hit and was damaged first causing the possible electrical short and sent me away.

Even the glass place i took it to agrees that the glass shattered due to overheating.  I am working on getting video from the gas station it happend at.

I wonder how many other people this has happened to and are getting sent away without it being reported to GM.

 

Posted
Im glad ur GMC dealer was helpful! Roseville MN GMC tried to tell me the window got hit and was damaged first causing the possible electrical short and sent me away.
Even the glass place i took it to agrees that the glass shattered due to overheating.  I am working on getting video from the gas station it happend at.
I wonder how many other people this has happened to and are getting sent away without it being reported to GM.
 
I have said it a million times but one more. Call your local gm service rep. He will request paperwork and truck info then will come back with a email saying you are all clear to have it serviced. Never let the dealer tell you no.

Sent from my SM-N960U using Tapatalk

  • Like 1
Posted

This all pretty much happened in 1 day, I needed it repaired quick and was scared to drive with a shattered window so i took it straight a glass place after dealer didnt help and they had my insurance cover it.

I then called GM motors and they opened a case i wanted my insurance to be reimbursed because i know it wasnt damaged first but they got back to me and said they cant. I am 300ish miles over bumper to bumper warranty but do have the wrap extended warranty. But only the window was replaced so its possible it will happen again. Then i will call GM first Thanks!

Posted

Just curious how many experiencing the exploding rear window have the defroster set to "auto on"? Also are they all sliding rear windows? 

Posted

Yes defroster was on with auto start when this happened and yes its a sliding window the spot the dealer referred to as point of impact just so happened to be exactly where the contact for the sliding window is. this is the pic the glass shop sent me

IMG_8559.jpg

Posted

Sounds like there may be a over heating issue related to these. I went into settings and turned off rear defrost auto on. 

Posted

So this post has me freaked out I notice when I remote start my truck the rear defog is on. Went in and it’s set to auto off in the settings. That freaked me out even more lol


Sent from my iPhone using Tapatalk

  • Like 1
Posted (edited)

My 2015 Sierra just did the same thing today. I had it running with the remote start and the rear defrost on.  My rear passenger shattered when I closed the door though.  I'm wondering if the excessive heat weakened the window and the pressure from closing the door shattered it? Had to call GMC directly.. my dealership wouldn't touch it. 

 

 

Edited by ZG86
Posted
21 minutes ago, ZG86 said:

My 2015 Sierra just did the same thing today. I had it running with the remote start and the rear defrost on.  My rear passenger shattered when I closed the door though.  I'm wondering if the excessive heat weakened the window and the pressure from closing the door shattered it? Had to call GMC directly.. my dealership wouldn't touch it. 

 

 

Sounds like an awesome dealership lol. GM told me to bring mine to a dealership first. We should all somehow get a case or something going in case the dealers or GM say “sorry we can’t duplicate the issue”.  Please let me know what GM says and I’ll do the same with you. I need to schedule an appointment next week. Any idea why your dealership said they wouldn’t touch it?

Posted (edited)

I have my rear sliding set to off but it still comes on with remote start during freezing temps. 

Edited by 2009GMC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • 3.41 Kroger’s in Montgomery TX
    • I really wanted to go to the Fox 2.5's But they were like ~$1,500 vs ~$425 for the Bilsteins. And my research on FOX shocks was that they do not have a great reputation for longevity. I am sure they the FOX's are fantastic, but I know from experience the Bilsteins are rock solid for at least 150k miles. 
    • Conditions for Meeting a Cold Start   The ignition voltage is between 10 and 15 V. The barometric pressure (BARO) is more than 75 kPa. The engine coolant temperature (ECT) at start-up is less than 42°C (108°F). The intake air temperature (IAT) is between 2–32°C (36–90°F). The engine is OFF for greater than 6 hours or the following conditions must be met: The start-up IAT minus start-up ECT are within 12°C (22°F). The start-up ECT minus start-up IAT are within 50°C (90°F). Fuel level is between 25 and 75 %.   Circuit/System Verification Verify that all I/M System Status indicators report YES, and that no I/M Test DTCs are present.If any I/M Test DTCs are set Refer to Diagnostic Trouble Code (DTC) List - Vehicle. If no I/M Test DTCs are set All OK. Inspection/Maintenance (I/M) System Set Procedure   Warning: Refer to Road Test Warning. Note: Do NOT touch the accelerator pedal until told to do so. A change in TP Sensor angle or an increase in engine speed may invalidate this portion of the test.   Note: An I/M Test DTC will not be stored or erased from the ECU except at the end of trip processing, which occurs 5 s after ignition OFF.   Ensure that the vehicle meets the conditions for a cold start listed above. If the EVAP I/M System Status indicator displays NO, perform the EVAP Service bay test if applicable. Turn OFF all of the accessories; HVAC system, other electrical loads, including aftermarket/add-on equipment, etc., and open the hood.   Set the vehicle parking brake and ensure the vehicle is in park for automatic transmission or neutral for manual transmission.   Start and idle the engine for 2 min.   Close the hood, release the parking brake and Accelerate at part throttle to 72–80 km/h (45–50 mph) with this speed maintained until the engine reaches operating temperature, 8–10 min.   Continue operation under these conditions for an additional 6 min.   Accelerate at part throttle to 90 km/h (55 mph) with this speed maintained for 2 min.   Release the accelerator pedal for at least 10 s. This will allow the vehicle to enter the decel fuel cut off.   Safely stop the vehicle, with the engine in drive for automatic or neutral with the clutch pedal depressed and parking brake applied for manual. Allow the vehicle to idle for 2 min.   Shift the vehicle to park for automatic and neutral for manual. Turn OFF the ignition and exit the vehicle. Do NOT disturb the vehicle for 45 min.   Observe the Inspection/Maintenance (I/M) System Status with a scan tool. All of the I/M System Status indicators should display YES.   If the EVAP I/M System Status indicator displays NO, turn OFF the ignition, ensure that the vehicle meets the conditions for a cold start, and repeat steps 6-11 three more times, or until the EVAP I/M System Status indicator transitions to YES. If the indicator continues to display NO, refer to the Inspection/Maintenance (I/M) System DTC Table to identify the DTCs that did not run.   If any of the I/M System Status indicators display NO, refer to the Inspection/Maintenance (I/M) System DTC Table for the indicator which did not display YES. The I/M System DTC Table identifies the DTCs associated with each I/M System Status Indicator.   Observe the I/M Test DTC information with a scan tool. Verify there are no I/M Test DTCs present. If an I/M Test DTC is set, diagnose the DTC using the Diagnostic Trouble Code (DTC) List - Vehicle and refer to Inspection/Maintenance System Check.   Observe the engine DTC information with a scan tool. Verify no DTCs are present. If a DTC is set, diagnose using the Diagnostic Trouble Code (DTC) List - Vehicle. After repairs, perform the Inspection/Maintenance Complete System Set Procedure to verify no further DTCs are set.       Looks like one procedure to me.  Repeated as necessary.
    • My 2020 AT4 6.2 has had the valve spring issue addressed at ~200 miles, front cover/pump replaced at 18k, water pump at 34k and idler pully at 65k.  I would agree with ditching by 100k unless you elect to go with upgraded hardware...say built 10l80 and an lt4 or l8p swap.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...