Jump to content

Recommended Posts

Posted

Stock rims with 2 inch level kit.  Goodyear Trailrunner AT 275/60R20.  Pic in sig.

 

  • 2 weeks later...
Posted

I have a 2015 Silverado double cab . I swapped my stock wheels for 20” wheels with larger tires . It does rub a bit when turning but that’s not an issue . Does anyone experience a lot of squeaking when going over speed bumps or bumpy roads ? It’s pretty annoying that it does that. 

96BE535B-0EA3-44D9-BED5-6D11664541B2.jpeg

  • 2 weeks later...
Posted (edited)

Just bought a 2018 Chevrolet Silverado Z71 with the factory 18" wheels and standard 265/65R18 tires.  I was looking at the Rough Country 2" leveling kit/spacers.  Just wanted to know if this works with factory wheels and tires, as their website recommends spacers for the wheels.  Thanks.  I did see a couple in here that were done just like I asked, but I just wanted to confirm.

Edited by Thiessen90
Posted

To cold to get any good pics.. but here is my 2017 Sierra with 2" front level and 2" rear block with 275/60R20 Falken Wildpeak AT3Ws

20181212_155349[1].jpg

Posted

2” level and rear block removed

275/70/18 Falken Wildpeaks

07340e81c47d7cd5091a6f3845ae037f.jpg

 

49f2c089765255419092606f2663f33c.jpg

 

 

New set up

Method Racing Double Standards

Bfg 315/70/17 KO2s

9bab82514ab2efad836aeb006840871c.jpg

 

 

Sent from my iPhone using Tapatalk

 

 

 

  • Like 1
Posted

9bb87c8f7481877ca9d44693ed35e114.jpg24e0b687340b4ddde5f565bd46011ec7.jpg

2018 All Terrain. 2.25” ReadyLift Level Kit / 295/60r20 Toyo MTs.


Sent from my iPhone using Tapatalk

  • Like 4
Posted

2018 LTZ Z71 w/ 2.25” ReadyLift Kit (only used top spacers because of the Rancho shocks). Tires are 295/60/20 Toyo MT’s.

51CBF48F-AD19-4FDC-983E-DB89FD00BEA2.jpeg

  • Like 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...