Pics of leveling kits with stock wheels

[durandetto]

Bilstein 5100s on highest setting. 305/45/22 Nitto Ridge Grapplers. Rubs slightly on the sway bar at full lock. Might put a small spacer on it to resolve that issue.

Sent from my SM-N975U using Tapatalk

[da90]

1.5 front with factory rear. 33/12.50/22.
I am thinking I want to paint the fender trim. It hasn’t bothered me much until lately and I am thinking it’s time to get rid of the textured plastic.


Next to my old truck at work.



Sent from my iPhone using Tapatalk Pro

[GMC Sierra 34]

I think i had a 2” level when i first got my truck with terra grap g2s in that size

Do you remember if it rubbed anywhere?


Sent from my iPhone using Tapatalk

[goeb34]

Do you remember if it rubbed anywhere?


Sent from my iPhone using Tapatalk

Not at all, full lock forwards and reverse it was fine

[asp06]

On 11/9/2018 at 1:44 PM, ducklawyer said:

2” and 285/65r18 KO2s + two crazy dogs



Sent from my iPhone using Tapatalk

I've been looking at going with this same tire and size.  Do you have any rubbing?  I see a lot of yes and no's on various forum posts but different tire manufacturers may fluctuate in actual dimensions.  Also, what was the decrease in mpg's you experienced and did you re-calibrate your ecm for the larger tires?  Thanks in advance.

[ducklawyer]

I've been looking at going with this same tire and size.  Do you have any rubbing?  I see a lot of yes and no's on various forum posts but different tire manufacturers may fluctuate in actual dimensions.  Also, what was the decrease in mpg's you experienced and did you re-calibrate your ecm for the larger tires?  Thanks in advance.

No rubbing whatsoever. The city mpg’s will take a little bit but can’t tell a difference on the highway. My lifetime average has stayed at 17 (until duck season as I have been pulling my boat for the last two months - it will go back up after season is over)This is a pic from my last hwy trip. I did not recalibrate as it still seems accurate.



Sent from my iPhone using Tapatalk

[L86 All Terrain]

On 1/1/2020 at 4:17 AM, da90 said:

1.5 front with factory rear. 33/12.50/22.
I am thinking I want to paint the fender trim. It hasn’t bothered me much until lately and I am thinking it’s time to get rid of the textured plastic.


Next to my old truck at work.



Sent from my iPhone using Tapatalk Pro

My friend is an autobody guy and he painted his lower air dam, fender flares and his chrome window mouldings black to match and it looks sooo good. I want to do the same to my All Terrain but our trucks already look very similar. He didn't even sand the texture off the flares, just scotchbrite'd them and by the time he had adhesion promoter, primer, paint and clear on they look smooth as glass. He did a bit of wet-sanding after paint. Here is my old GMT900 and K2, opposites attract.

Edited January 9, 2020 by L86 All Terrain

[Jhawks4]

2018 Silverado z71 oem 18 wheels powder coated gloss black. 2.5 motofab level front 2 rear lift motofab blocks. 295/70r18 dick cepek trail county exp

[15 Z71]

On 1/9/2020 at 12:09 PM, L86 All Terrain said:

My friend is an autobody guy and he painted his lower air dam, fender flares and his chrome window mouldings black to match and it looks sooo good. I want to do the same to my All Terrain but our trucks already look very similar. He didn't even sand the texture off the flares, just scotchbrite'd them and by the time he had adhesion promoter, primer, paint and clear on they look smooth as glass. He did a bit of wet-sanding after paint. Here is my old GMT900 and K2, opposites attract.

Love the GMC alltreain wheels. 

[Rick Burnham]

Before and after (added Bilstein 5100's for 1.8" lift and 33" Dura Tracs) on factory 20's w/chrome cladding removed:

Edited February 6, 2020 by Rick Burnham

[GRANT KEEL]

2” rough country level in the front. 33” mastercraft MXT on stock 17s. 

[bowhunter8]

For all the guys with 17+ trucks with stamped steel upper control arms... are you using the facorey UCA or replacing them with aftermarket UCAs?


Sent from my iPhone using Tapatalk

[Anthony Coniglio]

On 5/24/2018 at 7:15 PM, jgraves13 said:

Snapped a pic before the new tires went on. 2018 with 2" RC leveling kit




Sent from my iPhone using Tapatalk

Any rubbing issues? What size tires do you have?

[jgraves13]

Any rubbing issues? What size tires do you have?

Went with 295/70/17. Slight rub on the felt liner and plastic trim piece, not enough to warrant trimming though


Sent from my iPhone using Tapatalk

[greystone]

On 2/15/2020 at 2:20 PM, bowhunter8 said:

For all the guys with 17+ trucks with stamped steel upper control arms... are you using the facorey UCA or replacing them with aftermarket UCAs?


Sent from my iPhone using Tapatalk

I just did the Rancho quicklift. Raised it a bit more than expected.  I am hoping to keep the factory UCA on my 17 Z71.  However, they are hitting the drop stop on big dips in the road.