What Have You Done With Your T1 Today ?????

[Box God]

On 5/31/2022 at 3:15 PM, jashaw said:

Xf offroad XF222 wheels -12mm offset

Cooper Discoverer Rugged Trek

275/60R20 (factory size)

Removed lower wheel liner bracket, and pinned wheel liner back in empty space that was filled by the bracket. No rubbing at full turn in either direction.

3/8" spacer to clear calipers

 

 

This is so beautiful!!!! 

[Box God]

I got a 21 sierra elevation and I blacked out all the chrome badges only thing chrome left are the exhaust cut outs but will be changed soon

 

 

Edited June 16, 2022 by Box God

[TNTSierra]

A full interior detail and a nice hand wash and dry!  

[mjonesjr84]

I had a bit of white vinyl left over from my '21 AT4 so I thought I'd see how the bowties looked in white. This looks better than black IMO. I'm going to have them keep the center caps out of the wheels when I get the tires rotated so I can cover them in white as well.

[Peter S]

Finally got a bumper custom made for my truck. Tabbed for 6 Baja designs XL80 lights. Been a little over a year since the stock bumper came off when the fiberglass and suspension was installed.

[kodiakdenali]

Modified my mode switch to put my truck in sport mode automatically on startup. So much better!

[pigpen23]

Got my 2" RC level and 1.5" ProRyde blocks installed. Currently have ~.5" of rake, will see if it changes after the alignment tomorrow. Getting tint done tomorrow and the new tires are also ordered.

[Brent D]

Purchased on 6/22/22-This is before lift and steps

 

Swapped out tires/rims for a 2021 Tahoe rim as I am not a fan of all black rims

Swapped out rectangular running boards for High Clearance off road step. 

Added 2" factory GM lift. 

Added aftermarket subwoofer under rear seat

Windows tinted

Aeroskin 2 hood protector

Lasfit LED Reverse Lights

ARQ Rearview mirror with universal home remote
Tow mirrors are in my garage and will be installed in next few days.

Edited July 9, 2022 by Brent D

[Brent D]

This is after steps and lift (pictures to big to post in same post sorry) Gained about 5" clearance under mid of truck. Not sure if im gong to add a leveling kit or not yet. May also add more aggressive tires down the road but enjoying my 27mpg too much right now.

 

Edited July 9, 2022 by Brent D

[Brent D]

On 6/27/2022 at 11:16 PM, mjonesjr84 said:

I had a bit of white vinyl left over from my '21 AT4 so I thought I'd see how the bowties looked in white. This looks better than black IMO. I'm going to have them keep the center caps out of the wheels when I get the tires rotated so I can cover them in white as well.

 

How do you like the firewire? I am just about to stat adding my lights back onto my truck and considered these but havent seen them in person. I run a speedturtle, visor light, and some accessory lights on the sides but considered putting firewire on my sides instead. Short of drilling there is not a lot of options for side lighting on a tinted truck.  I guess would you buy them again?

[mjonesjr84]

5 hours ago, Brent D said:

 

How do you like the firewire? I am just about to stat adding my lights back onto my truck and considered these but havent seen them in person. I run a speedturtle, visor light, and some accessory lights on the sides but considered putting firewire on my sides instead. Short of drilling there is not a lot of options for side lighting on a tinted truck.  I guess would you buy them again?

 

I love them. They are very low profile, easy to install, and puts off great light. Between my brother and myself, we have probably 30 Firewire LED's on different vehicles. The only issue we have ever had is the inline fuse will pop easily. Firewire recommended taking it out if it is installed on a fused circuit before their fuse. It was an easy fix.

[Brent D]

On 6/15/2022 at 9:42 PM, Box God said:

I got a 21 sierra elevation and I blacked out all the chrome badges only thing chrome left are the exhaust cut outs but will be changed soon

 

 

Box did you buy new badges or paint/plastidip those? I am contemplating doing this to mine. Thanks

[Peter S]

Installed new leaf springs, cut some big holes in the bed, and installed the bedcage and new shocks. New setup should be almost twice the wheel travel as stock. 

 

 

[cansled]

On 7/5/2022 at 4:12 PM, kodiakdenali said:

Modified my mode switch to put my truck in sport mode automatically on startup. So much better!

Please, please share this mod.  I would love to keep mine in Sport mode as I keep forgetting to turn in on!

[kodiakdenali]

1 hour ago, cansled said:

Please, please share this mod.  I would love to keep mine in Sport mode as I keep forgetting to turn in on!

 

I so wish the truck was like this stock! I love this modification. Unfortunately is wasn't the easiest thing in the world to pull off, but I did a pretty detailed video on how I did it here:

 

 

The project isn't 100% done yet, its kind of in a testing phase, but what's left is just cosmetic really. the functionality is working great and I love it!