Jump to content

Recommended Posts

Posted
9 minutes ago, seniorjumper82 said:

Mines not leaking yet that I’ve seen but I did find a crack in the window frame yesterday?  Will GM replace it just due to a cracked window frame?


Pssshhhh no. They don’t even replace them when they are cracked and leaking.

  • Haha 3
  • Confused 1
Posted

Finally took mine in to get leak fixed.  Mine was only a small leak and didn’t do it all the time.  They did the TSB caulking work and did a neat job, no globs, smears or scratches.  I spoke to service mgr and they looked but found no cracks in frame.   He said  The  spoiler was not sealed correctly and was leaking.  So far it is dry after testing at home.  Time will tell if it works.

  • Like 2
Posted

Picked up my truck last night.  Everything looks good, body shop did a great job, and believe me I inspected it... They said they replaced the rear window but also discovered a leak in the front A-pillar where the sunroof drain wasn’t properly connected. Also noticed the carpet and padding was wet so they replaced that and all the carpeting. I guess I should say thank you that they actually took the time to inspect everything and replace what needed to be but REALLY.... Why do we spend $60k and buy brand new trucks? It’s supposed to rain for the next couple days so I guess we’ll see. Fingers crossed...  Btw, the service rep was very apologetic and felt really bad, even though none of it was HIS fault. Nonetheless he gave me the next 4 oil change/tire rotations for free. A nice gesture...

  • Like 4
Posted

Good News!  Glad to see they took care of you and your vehicle.  Interesting about the sunroof, as now that is another thing to check.  
Here’s hoping it stays fixed 

Posted

For those of you having good luck with your dealers, would you mind posting what dealership you had your work done at? I think it would be helpful for anyone who comes along and lives by one of those to save some time and headache.

I wish I would have had a satisfactory experience in all of this.


Sent from my iPhone using Tapatalk

Posted

Bridgewater Chevrolet in Bridgewater NJ tried the caulk repair once, did a decent job but didn't work, they called GM and got a new window approved for 2nd. appointment, window replaced and no leaks since. They sent it out to a glass shop to replace the window as a FYI.

  • Like 1
Posted (edited)

Ingersoll Auto of Danbury CT.  Salesman was Dave B.  And service was Don.  Great place and great guys.   Would HIGHLY recommend.  
 

Oh yeah, they changed my mirror caps from the chrome to the black (I had asked about in one of the other posts) much better now...?

Edited by VinnieM
Posted

I had my first repair (caulk as per TSB) done at Bennett Chevrolet in Egg Harbor Township NJ.  They did a good job and returned truck detailed.   It was just done Monday And it is good so far, but time will tell.

Posted
1 hour ago, VinnieM said:

Ingersoll Auto of Danbury CT.  Salesman was Dave B.  And service was Don.  Great place and great guys.   Would HIGHLY recommend.  
 

Oh yeah, they changed my mirror caps from the chrome to the black (I had asked about in one of the other posts) much better now...?

Great to know! This is where I bring my truck even though I bought it at Ingersol in Watertown... I work in Danbury so it convenient 

Posted

Had my rear window leak fixed at the dealership I bought my truck from.... Huffines Chevrolet Plano, Texas

 

Still having no leak issues yet with the new fix

 

 

Posted

I posted about a week or so ago that I didn’t have time to read all the pages of this thread.  While I still haven’t read them all I have been through about 50 of them and that’s enough.  

 

I am having second thoughts about buying one of these trucks.  All the dealers near me are in lockdown so I have time to think about it.   The idea of spending this much money for something with a known problem like this seems like a bad idea.

 

 I don’t drive in the rain much and the truck would be kept in a garage.  I am handy and wouldn’t have any trouble doing the Permatex fix, so I may wind up pulling the trigger.   I have looked at all the trucks out there and like the Denali the best.  I have mixed emotions about finding this thread.  

 

Posted
I posted about a week or so ago that I didn’t have time to read all the pages of this thread.  While I still haven’t read them all I have been through about 50 of them and that’s enough.  
 
I am having second thoughts about buying one of these trucks.  All the dealers near me are in lockdown so I have time to think about it.   The idea of spending this much money for something with a known problem like this seems like a bad idea.
 
 I don’t drive in the rain much and the truck would be kept in a garage.  I am handy and wouldn’t have any trouble doing the Permatex fix, so I may wind up pulling the trigger.   I have looked at all the trucks out there and like the Denali the best.  I have mixed emotions about finding this thread.  
 

Not to deter you as I’m sure many people are happy with their trucks, but my Denali is the worst vehicle I have ever owned. Transmission promblems, leaking rear window, and every interior panel rattles already with only 1300 miles on it. The fit and finish and overalll build quality is horrible imo. Hoping I can get the issues sorted out but if not will be getting something else in the near future.


Sent from my iPhone using Tapatalk
Posted

Had  my 19 Denali window caulked at Goldstein GMC Albany NY back in early December. They did a very neat job. No goop anywhere, no stains, no scratches. Could not even tell they did anything except the sealant smell that faded after a couple weeks. Many heavy rains and carwashes since then and no leaks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I had skimmed through that article when you posted the link and honestly I felt rather defeated in a sense and realized that all these years in changing oil that in fact putting in what I was told was a good quality oil was probably not filtered as well as it should be although the filter put on the engine would be what ( as long as it never went into bypass mode ) would be the final filtering of the new oil that the engine components would first see, but then the filtering media itself is not up to par to what is ideal because a full flow filter would be too restrictive to filter fine enough for the engines best outcome in the long run. Only one of our tractors over the years which was a Versatile with a 855 Cummins had a separate bypass filter, some engine manufacturers did spec a partial bypass system within the main oil filter but I don't believe any other trucks or equipment I was servicing used such a filter. No doubt a product like the Amsoil bypass system is of benefit as long as nothing goes sideways with the extra plumbing and filter such as a rupture/leak that could cause the oil to pump out of the engine ( yes that Versatile had a remote canister with hoses routed to it as well ). With the idiot egr system on a diesel and as a result forcing a lot more soot into the oil, that certainly isn't helping the diesel engines cause or as you pointed out the GDI engine issue with creating more soot and aside from having a fancy secondary filtering system, changing the oil more often helping lower the total soot load.     So oil manufacturing and the end product is not something one can control and I wonder if there are specs on what various oil packaging companies produce in particle count or size. As to the filtering, if the OEM is not designing a filter size and spec that is really what it could be, they too are short changing the end user and so what is the answer. Of course as you say the oil side can only do so much if the air side isn't keeping up its end of the picture and air filters are only so efficient and if in a dusty environment such as farm or construction or driving gravel roads there is a lot of dirt to filter out and some of that ends up into the air stream.    Of course the irony in places like where I am where they dump the salt on the highways but also will mix in some calcium or outright pure calcium for problem road area's, or using calcium as dust control on gravel roads, the vehicle that gets used in that environment may rust out before a properly engineered engine and maintenance finally wears out so one has to face that reality in the rust belt. 
    • Has anyone run these on their 2500?
    • have you stuck with dealer oil changes since then? I made the same switch after getting tired of crawling around under the truck, but I’ve found some dealers are way better than others about getting you in quickly. Curious if yours has been good about scheduling or if you’ve had to look elsewhere for quicker turnaround.
    • Thank you.   I am set on a 3.0 Duramax as my previous truck with a Ford Ecoboost had just as many, if not more, "common" issues.  Cam phasers, timing chain issues, 10-speed valve body and CDF drum, emissions issues, etc.  So I figured, why not get 2x the fuel mileage (these things got 27+mpg on every mixed city/highway test drive I put them through) and better towing capability with resale value to boot?   My minimum, shortest trip will be 50 miles 1-way and I regularly go out of state with a travel trailer.  I'm planning on using this for a marketing/event promotion business also, which would require regular towing of trailers for bands, DJs, sound and lighting gear, along with my personal camera gear for filming events.   Looked at other trucks in the $30k+ price range but the issues seem to be everywhere, plus too many with gaudy mods.  I'm literally sticking with RWD trucks because they tend to be actually used as trucks, vs. the 4x4 models I've seen with unsafe lifts, huge tires, and general mods that would affect reliability (I'm wondering if some of them were tuned, hence the aggressive throttle response and hard shifting).   So my goal is to find a stock, 3.0 with 1 or 2 owners, in good physical condition, and decently well maintained.  Can't seem to find that up here, everything in the $27-30k range has had multiple owners, smoke smell, issues, or body damage.  Or the ridiculously modified trucks with 80k miles for under $27k but lots of problems...
    • That’s pretty tough Grumpy. I reread the previous few posts. They all reference oil changes. Much like your last thread. In my humble opinion it keeps things interesting.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...