Jump to content

Recommended Posts

Posted
On 4/6/2020 at 11:12 PM, 19TrailBoss said:

So in the process of replacing my headliner because of water staining from the rear window leak, I now have a leak from my front window... Apparently the front windshield had to be removed to replace the headliner. Oh, and my rear window is leaking AGAIN!!! My dealership has tried to reseal the original window, then the entire rear window was replaced, then the new rear window was resealed, and now I've discovered the leak yet again. I'll be calling back my Chevy corporate rep tomorrow, and possibly a SC lemon law lawyer depending on how the conversation with Chevy goes...74c0daecf705bbc99c6a290a05c065a3.jpg

Sent from my SM-G988U using Tapatalk
 

Why would they have to remove the windshield to replace the headliner? That's like trying to pull a tooth by reaching through your rectum. On a Silverado/Sierra or like on my old Avalanches it is done by removing the rear window, not the windshield as has to done with a sedan.

 

And evidently from the recurrent leak the rear window should have been removed for a proper repair and headliner installed through the rear access. And just a thought...a sunroof?.......if so may be a blocked drain tube in the "A" pillar which is where that leak would show up.........pop the threshold trim plate a windshield leak would show up as a soaked jute carpet backing and water in the wiring loom channel underneath.

Posted

Great info Thomcat.... When I brought mine in for the rear window they discovered the leak in the front.  The carpet was wet under the mat.  They figured out that when the truck was built, the sunroof drain line wasn't properly connected and it was draining on the floor similar to that picture.  Worth a shot...

Posted
12 hours ago, Thomcat said:

Why would they have to remove the windshield to replace the headliner? That's like trying to pull a tooth by reaching through your rectum. On a Silverado/Sierra or like on my old Avalanches it is done by removing the rear window, not the windshield as has to done with a sedan.

 

And evidently from the recurrent leak the rear window should have been removed for a proper repair and headliner installed through the rear access. And just a thought...a sunroof?.......if so may be a blocked drain tube in the "A" pillar which is where that leak would show up.........pop the threshold trim plate a windshield leak would show up as a soaked jute carpet backing and water in the wiring loom channel underneath.

It’s just the way it is, the headliner doesn’t fold and the only way to get it out and a new one in is to remove the windshield. 

Posted

I have a 2019 RST with the same issue. I will be bring it back in for the same issue for the 3rd time. First time they tried to bandaid it when I was told it was being replaced ( siliconing or butyl from the outside) ?‍♂️. Second time I was assured that they would be actually be replacing the window. Third time all parties were irate. Dealership, body shop, window shop. Long process seeing as the headliner and cab spoiler need to be removed to access the window. Yesterday when I took it in for them to check for the third time and I brought it into the shop so they could hit it with the wand with the dealership and mechanic present so they could see and the mechanic said he thinks it's actually coming from the cab spoiler. Must not be sealed properly but it comes in at such a weird spot. Driver's side top right hand corner of the rear window. It comes in from behind the read window rail corner. Completely dry if you run your finger through the track but where it attaches to the window it makes a slow stream inside. Mechanic said I was lucky because one guy had it flood into the cab and destroyed his head liner. Let them know it could be the cab spoiler so you guys dont have the same headache IV had driving a loner for over a week total. 

Posted
On 4/9/2020 at 5:17 AM, Thomcat said:

Why would they have to remove the windshield to replace the headliner? That's like trying to pull a tooth by reaching through your rectum. On a Silverado/Sierra or like on my old Avalanches it is done by removing the rear window, not the windshield as has to done with a sedan.

 

And evidently from the recurrent leak the rear window should have been removed for a proper repair and headliner installed through the rear access. And just a thought...a sunroof?.......if so may be a blocked drain tube in the "A" pillar which is where that leak would show up.........pop the threshold trim plate a windshield leak would show up as a soaked jute carpet backing and water in the wiring loom channel underneath.

I posted just a little bit earlier, rear window might be the cab spoilers not sealed. In on my 3rd time in for a replacement 

Posted

My rear window is getting replaced now, went in on 4/06, and still no word when it will be done. They are getting a glass specialist to install rear window, but the second they call me to tell me its done, its going to get traded in. Just don't want to deal with it anymore since people are still getting leaking windows even with a replacement. I drive too many miles and will be out of warranty very soon and don't want to be stuck paying out of pocket later down the road.

Posted
3 hours ago, Memphis87 said:

My rear window is getting replaced now, went in on 4/06, and still no word when it will be done. They are getting a glass specialist to install rear window, but the second they call me to tell me its done, its going to get traded in. Just don't want to deal with it anymore since people are still getting leaking windows even with a replacement. I drive too many miles and will be out of warranty very soon and don't want to be stuck paying out of pocket later down the road.

What will you trade it for? 

Posted

You really want to trade it in now?  They know you want to dump it, do they'll lowball you, and there's a ever decreasing selection of vehicles to choose from to replace it...

  • Like 1
Posted
You really want to trade it in now?  They know you want to dump it, do they'll lowball you, and there's a ever decreasing selection of vehicles to choose from to replace it...
He doesn't have to trade it in at that dealer.

Sent from my SM-N960U using Tapatalk

  • Like 2
Posted
22 hours ago, Cpl_Punishment said:

What will you trade it for? 

the 2020 rams have my eye. Just got to try and stay away from the panoramic sunroof and the air suspension

Posted
22 hours ago, davester said:

+

6/You really want to trade it in now?  They know you want to dump it, do they'll lowball you, and there's a ever decreasing selection of vehicles to choose from to replace it...

yea i wont be staying with gm, looks like ram will be getting my business right now. Its sad to, ive had a chevy for every vehicle since i was 16. But they havent figured out the rear window thing and thats concerning

Posted
the 2020 rams have my eye. Just got to try and stay away from the panoramic sunroof and the air suspension
And the uconnect infotainment... We had it in our 2014 Jeep Grand Cherokee and it was glitchy and would go completely black from time to time.

Sent from my SM-G988U using Tapatalk

  • Like 1
Posted
22 minutes ago, 19TrailBoss said:

And the uconnect infotainment... We had it in our 2014 Jeep Grand Cherokee and it was glitchy and would go completely black from time to time.

Sent from my SM-G988U using Tapatalk
 

I was going to say the same thing.

Posted
yea i wont be staying with gm, looks like ram will be getting my business right now. Its sad to, ive had a chevy for every vehicle since i was 16. But they havent figured out the rear window thing and thats concerning

What about one with a solid rear window since it seems like there’s no issues


Sent from my iPhone using Tapatalk
  • Like 1
Posted
And the uconnect infotainment... We had it in our 2014 Jeep Grand Cherokee and it was glitchy and would go completely black from time to time.

Sent from my SM-G988U using Tapatalk

I've had tons of problems with the gm one in my sierra, goes black, changes volume, plays multiple sources at the same time and wont let me change anything. There are problems with uconnect for sure, but probably not any worse than the gm/chevy. Honestly I think its just luck if you get one from either company that actually works right.

Sent from my SM-N960U using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The timing marks are ok, that is #1, you can turn it over until they line up and it won't change anything, the crankshaft turns twice for every camshaft revolution, I have always set up SB Chevs as your pic shows using a straight edge
    • Someone's been here before.... There is a receipt for a 3-piece timing set, purchased earlier this year.   Is this picture something, or, nothing?   I have the timing cover off and my crank is perfectly TDC and the keyed gear's locating mark is dead on 12 o'clock.   The cam gear locating mark is also at 12 o'clock. Now, I'm not an expert, but all the install guides say the two locating marks should meet and be perfectly aligned when installing a timing set. The mark on the crank should be dead on 12:00 and the cam gear's mark should be dead on 6:00, and both marks should be perfectly vertically aligned.   I believe the timing gear is keyed or has a dowel that ensures it can only be installed on the cam in one position, so I have to believe the cam is out of phase somehow. At the very least, with a triangular bolt pattern, it can only be installed in one of 3 different positions.   Before I pulled the front cover, the truck was running alright, no service engine soon lights except an occasional P0172 / rich condition. Timing -16 timing at idle (should be +16), and total -35% fuel trim, two conditions I haven't been able to figure out.   In related news, my injector tested pretty well, wasn't leaking, but I had it rebuilt anyway, and it's on it's way back to me.         Along with this discovery, the good and bad:   Good: The oil pan seal appears undamaged.   Bad: -The timing cover has been reused, and the positioning dowels have been broken. That could explain some of the leaking. -Some kind of white paste or grease was used to try to seal the oil pan seal and timing cover (since wiped off..). -Then, someone globbed silicone all over the front of the cover and also buried the ckp sensor in it. But, they didn't put any inside the cover or use RTV to try to seal the oil pan seal with the timing cover (good).
    • The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 
    • It also depends on what criteria someone is using for “best” when talking filters.  Are we going off best efficiency?   Best quality/QC?  Etc. because the two may not mutually exclusive.  
    • They’re not the same wiz as 10-15 years ago.  QC has fallen pretty hard.  The XP line was never good though in the first place.    https://bobistheoilguy.com/forums/threads/wix-filter-rusted-through.386492/post-6991372   https://bobistheoilguy.com/forums/threads/i-ve-used-my-last-wix-filter.27299/   https://bobistheoilguy.com/forums/threads/looking-for-a-better-replacement-for-wix-51258.403977/   https://bobistheoilguy.com/forums/threads/convince-me-in-using-the-purolator-boss.401537/post-7420147   the forums are littered with posts and examples of not great wix filters the last couple years 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...