Jump to content

Recommended Posts

Posted
There are three types of T1s coming off the line.

 

Long box, Short box, and Pandora's box.

That's funny!!!

 

But, the sad reality is that if a car company actually sold Pandora's Box there would be fanboys throwing their money down, and then whining about all the problems.

 

Sent from my SM-N960U using Tapatalk

 

 

 

Posted

I apparently bought the latter. Mine is back in the shop having the steering wheel replaced due to an unknown scrubbing. At least the replacement back window is holding up so far 

  • Thanks 1
  • Sad 1
Posted
On 8/17/2020 at 8:16 PM, OnTheReel said:

The caulking, believe it or not worked on the first try and is still working. If done right, the concept works and it may be better than a new window (that will also eventually crack). The sealer is flexible and shouldn’t ever fail. If done cleanly, you won’t see it either.

 

Problem is usually the damage they do in the process. Leaving sloppy caulk residue on the paint, messing up the headliner or trim, scratching the truck, etc. Seen a lot of it here.


Since this problem has persisted for like 2 years now, I would think most dealers have done a handful of them and have the process down. But just make sure to look everything over really well. Some of the things they screwed up on mine were not immediately apparent. Good luck.

I would have to agree at the end of the day I think it's down to the quality of the dealership personnel working on your vehicle I discovered my leak at the start of the year just after winter, now I will qualify by saying it only leaked in one spot and normally after a trip to the pressure wash or from going through a touchless car wash also there was soap mixed in with it so it became easy to spot.

When they performed the work not only did they do the caulking job they also removed the spoiler did a leak test on it and replaced the fasteners, since then it has been in torrential rain and numerous washes and so far has been leak free.

Posted

Well I did a thing today... While my truck is "fixed", I decided to just take the easy road and trade it in for a 2020 4Runner. It's been real guys, but won't miss the water leaks, transmission slips, rear end bucking, etc... It's a pretty truck though!

Sent from my SM-G988U using Tapatalk

  • Like 1
Posted
16 hours ago, 19TrailBoss said:

Well I did a thing today... While my truck is "fixed", I decided to just take the easy road and trade it in for a 2020 4Runner. It's been real guys, but won't miss the water leaks, transmission slips, rear end bucking, etc... It's a pretty truck though!

Sent from my SM-G988U using Tapatalk
 

Congrats on the purchase. We also own a 2020 4Runner. I got it for the wife and have played with the idea of getting myself one. With a small trailer I could probably live without the truck bed. Bulletproof vehicle. 

Posted
On 8/22/2020 at 3:35 PM, 19TrailBoss said:

Well I did a thing today... While my truck is "fixed", I decided to just take the easy road and trade it in for a 2020 4Runner. It's been real guys, but won't miss the water leaks, transmission slips, rear end bucking, etc... It's a pretty truck though!

Sent from my SM-G988U using Tapatalk
 

Congrats on the 4Runner. We just bought my wife a 2020 TRD ORP. It’s our 3rd 4Runner. Love them. Probably the best resale and reliability of any vehicle we’ve bought. Also have a 2020 denali HD for me. Hope I don’t get the leak... ?

  • Sad 1
Posted

My dealership called last Friday and GM wants to put another rear window in. To recap bought truck on Halloween. 2019 crew cab Ltz z71with 211 miles. At 1344 window leak reared it’s ugly head. After three unsuccessful caulk jobs and 79 days at the dealership GM relaxed the rear window and stained headliner.  Fast first to about a month an da week ago noticed water very slowly dripping from sliding window window track over rear driver side headrest. Now waiting on second window replacement 

Posted

I'm sure this has been asked and answered many times, but has this been resolved for the 2020 - 2021s? Or is just a dice roll?

 

Considering there's 150 pages on this topic, if GM hasn't got their ****** together yet its pretty sad. 

Posted
I'm sure this has been asked and answered many times, but has this been resolved for the 2020 - 2021s? Or is just a dice roll?
 
Considering there's 150 pages on this topic, if GM hasn't got their ****** together yet its pretty sad. 
There are for sure 2020's out there with the issue, but I believe it is yet to be seen if the 2021's will have the issue. I wouldn't be surprised though...

Sent from my SM-G988U using Tapatalk

Posted
There are for sure 2020's out there with the issue, but I believe it is yet to be seen if the 2021's will have the issue. I wouldn't be surprised though...

Sent from my SM-G988U using Tapatalk

That's because 2021s haven't been built yet

Sent from my SM-N960U using Tapatalk

Posted

For what it’s worth, these reports have tapered off quite a bit from what they were. And there was never a huge inrush of 2020s leaking like the 2019s. A handful, sure, but I don’t think I’d be losing sleep if I bought a 2020, and even less a 2021 if they ever hit lots.

Posted

Current owners and prospective buyers hoping for full disclosure or new part number or other real solution other than a toothpaste seal:

media2.giphy.com/media/l0NgQfbU5rhycFlIc/source...

 

  • Haha 1
Posted

Well my 2019 Sierra has been in to the dealership for the first round of attempted sealing of the rear window leak. Now waiting for a new window which is on back order. Recalls for minor things like programming, or alternator cable are one thing but you'd think by now the would know how to make a sliding window that doesn't leak. By the service bulletin I've seen the plastic track is actually cracked. And, by the way, the bolt holes that secure the spoiler need to be sealed properly too. My trickle at the left rear corner became a full blown running leak at both sides after the first service attempt. I'm guessing the aforementioned spoiler bolt holes are the culprits. Takes the joy out of getting a new truck for sure. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined
  • Who's Online   2 Members, 0 Anonymous, 691 Guests (See full list)


  • Latest Articles

  • Posts

    • Even tougher is the 5.0 / 302. That's what this one has.    https://postimg.cc/Z9XRrCSg   https://postimg.cc/4n3F3yzY   Just realized I had the airbox removed in the engine pic, lol.
    • Yep! This should be a pin somewhere as @pgamboa really dives into all of this. Thanks for reposting the link!
    • I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...