Jump to content

Rear window leak

Demon
 Share

Recommended Posts

Dali555 Enthusiast

Dali555

Posted
Posted

Just talked with the "new" dealership dealing with my truck after the last dealership nightmare of two tries.... last night I texted him that I would like the TSB performed regardless of what his glass guy finds that is causing my leak. I told the previous dealership that TWICE because it was already taken apart so they might as well do it. The first time they replaced the entire thing, didn't do the TSB... the second time they "resealed" it, didn't do the TSB... this new dealership texts me back today and said they already performed the TSB and sent me a pic of the sealant on the top AND said that the window wasn't causing the leak but that the clips holding that stupid spoiler was where it was coming in. He sent me a pic of the old style yellow plastic clip and said they changed styles... all GMC did was add a gasket... and sent me a pic of the new clips they were installing. When I get my truck back I will wait a bit and see if it leaks... if it doesn't then I will add the tube gasket I mentioned in a previous post here to the spoiler gap on top and to the gap between the spoiler and the window frame. HOPEFULLY, I will finally be done with this....

  • Replies 3.5k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Rocz3cqg
Rocz3cqg

Sliding Glass or / and Stop Light Module reported Leaking Situation             Contacts

ShamrockShooter
ShamrockShooter

Well my 2019 early build leaker was replaced with 2020 hopefully not leaker. No signs of an leaks on the window or headliner of the 2020 so fingers crossed. Very impressed with the 10 speed after th

Thomcat
Thomcat

No leaker here so can't do a 100% verification, but the problem seems to be with the spoiler design, regardless of weather the sealer leaks or not, and any cracks in the trim make it worse.  

Posted Images

SPASierra Enthusiast

SPASierra

Posted
Posted

Was you headliner getting wet every time it leaked?  Mine drips off the rails, but the headliner seems to be dry.  I may give the dealer a call and at least discuss it with the Service Advisor.

  • Like 1
Dali555 Enthusiast

Dali555

Posted
Posted
16 minutes ago, SPASierra said:

Was you headliner getting wet every time it leaked?  Mine drips off the rails, but the headliner seems to be dry.  I may give the dealer a call and at least discuss it with the Service Advisor.

No, my third time the drips were pretty minor and just dripped on the top of the seat....

jason1derful Enthusiast

jason1derful

Posted
Posted

Got my truck back this morning.  They originally started with taking the spoiler off and applying the sealant.  They confirmed this didn't fix the leak and kept the truck longer for a replacement window.  So far so good, no leaks but its only Day 1.  

  • Like 1
Fizzery6 Enthusiast

Fizzery6

Posted
Posted

Has anyone explored installation of this aftermarket Power Slider sold on eBay?  I contacted the seller and they claim it fits the new 2019+ body style.  The design is interesting as it looks like the plastic slider track is mounted lower, allowing for glass to body contact around the entire sealing perimeter of the window.  Rather than trying to sandwich the plastic slider track (known to crack) between the glass and body like the OEM GM design does.

image.thumb.png.ffaf4779e101307500bd9a5cd3fafed3.png

Duramaxsky Enthusiast

Duramaxsky

Posted
Posted

As I have said before the aftermarket will fix this. They see money to be made. Now several companies will compete for the best fix. I hope mine holds up until there are several choices. Then I will just pay to fix it right.

Sent from my SM-T510 using Tapatalk

gdl2165 New Member

gdl2165

Posted
Posted
On 12/9/2020 at 5:14 PM, Dali555 said:

Got my truck back after a week and a half. I’ll have to take a better look tomorrow as it was dark when I picked it up. I’ve attached a pic of the new glass numbers as well as the top of the frame and a pic of the old frame... slight difference

5478EF1E-4609-474F-9E44-9564BB8CEE8E.jpeg

 

 

 

I've had my 2019 now for just over a year and took it in last week for the third time with this issue.  The first two times they resealed it and called it good.  I told them this time I wanted the window replaced, and I now have this same version.  The tech notes say "The rear glass separating from frame".  I didn't get to see the old window so I can't verify exactly what it looked like but if this is accurate then it appears there may be another issue other than just the cracked frames and failing sealant. 

Blue5.3l Enthusiast

Blue5.3l

Posted
Posted
4 hours ago, gdl2165 said:

 

I've had my 2019 now for just over a year and took it in last week for the third time with this issue.  The first two times they resealed it and called it good.  I told them this time I wanted the window replaced, and I now have this same version.  The tech notes say "The rear glass separating from frame".  I didn't get to see the old window so I can't verify exactly what it looked like but if this is accurate then it appears there may be another issue other than just the cracked frames and failing sealant. 

The plastic frame is glued to the window so even if the top is sealed real good eventually the frame will separate from the window elsewhere. Solid window is the best way to go to avoid future issues. 

jd64 Enthusiast

jd64

Posted
Posted
On 12/31/2020 at 11:41 AM, SamDSJR said:

LOL. A 2020 or 2021 2500 Silverado. With any luck I'll be able to lemon that one too (they are still leaking and still documented cases on 2500's with build dates as late as 9/20.)

My 2020 2500 built 8/19 is also leaking. Just noticed it over the weekend. Small drips in the upper corners of each side, then dripping on the top corners of the back seats, also has stained the corners of the headliner.

 

bfontenot9 Enthusiast

bfontenot9

Posted
Posted

Has anyone filed a formal complaint with the NHTSA? I have pasted the link to the form below and also NHTSA's website where the form can be found.  Their website lays out how complaints are handled and used to determine if a recall is necessary.  I feel like if we get enough people to file a complaint, they will investigate the problem.  It is a possible step to having a recall issued.  The fact that so many people found this thread and then went check their trucks, tells me that there are probably a large amount of people that don't even know they have a leak until it gets bad enough to start smelling of mold and mildew. Mold inhalation/toxicity is a serious health issue, but in most cases is overlooked and misdiagnosed. If enough cases are approached from this safety standpoint it should create enough attention to have a recall issued.  Thinking ahead not only for ongoing issues for the new trucks, but as these 2019s are traded in and bought by more unsuspecting consumers who may be out of bumper to bumper warranties and who will be affected by this ongoing issue. 

Lets spread the word and get as many complaints filed as possible. 

 

https://www-odi.nhtsa.dot.gov/VehicleComplaint/

https://www.nhtsa.gov/recalls

 

Sorry if this has been brought up already.  New to the leak club. 

  • Like 1
TB3546 Enthusiast

TB3546

Posted
Posted

How many of you have or are in the lemon law process? If so what have been your outcomes? Good and bad. Thanks! 

Duramaxsky Enthusiast

Duramaxsky

Posted
Posted

We have had a lot of rain here lately. Everything from down pours that are causing flooding to light rain. I keep checking but still not leaking. Although yesterday and today I will be driving the old truck. We had a massive wind storm night before last and there is stuff all over the roads. I don't want to risk scratching the black paint so it will stay in the garage.

Sent from my SM-T510 using Tapatalk

autoscribe New Member

autoscribe

Posted
Posted
On 1/6/2021 at 11:00 AM, Dali555 said:

Just talked with the "new" dealership dealing with my truck after the last dealership nightmare of two tries.... last night I texted him that I would like the TSB performed regardless of what his glass guy finds that is causing my leak. I told the previous dealership that TWICE because it was already taken apart so they might as well do it. The first time they replaced the entire thing, didn't do the TSB... the second time they "resealed" it, didn't do the TSB... this new dealership texts me back today and said they already performed the TSB and sent me a pic of the sealant on the top AND said that the window wasn't causing the leak but that the clips holding that stupid spoiler was where it was coming in. He sent me a pic of the old style yellow plastic clip and said they changed styles... all GMC did was add a gasket... and sent me a pic of the new clips they were installing. When I get my truck back I will wait a bit and see if it leaks... if it doesn't then I will add the tube gasket I mentioned in a previous post here to the spoiler gap on top and to the gap between the spoiler and the window frame. HOPEFULLY, I will finally be done with this....

Hi - I am writer for the Detroit Free Press and I see a lot of complaints about rear windows for Chevy and GMC pickups. Would anyone be willing to talk to me? [email protected].

jason1derful Enthusiast

jason1derful

Posted
Posted

Another update.  Its been a few weeks.  Lots of rain here in the Northwest and still no leak after the window was replaced.  I took it to the self car wash(it needed it).  Soaked the top and got it all shiny again.  I didn't find a drop inside.  I hope it stays that way :)  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,979
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined

  • Who's Online   2 Members, 0 Anonymous, 552 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      AFM Experience

      By Grumpy Bear · Posted

      Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • newdude
      Seems to be Missing a lot of Updates

      By newdude · Posted

      GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Blade8971
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Blade8971 · Posted

      Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...