Jump to content

Recommended Posts

Posted
On 7/9/2019 at 8:55 AM, Controller23 said:

 

Setting of Lo, blower all the way up, seems to take forever to cool off the truck. Even after airing it out. I’m only in Wisconsin too, what about people in truly warm states?

 

My Tacoma would get so cold you could see your breath.

 

 

Sent from my iPhone using Tapatalk

 

Alabama here. Factory tint and has been 100 in the shade recently.AC in my Custom double cab is amazing. May be the coldest system I have ever had in a vehicle.

  • Like 2
Posted
38 minutes ago, stujameson said:

Alabama here. Factory tint and has been 100 in the shade recently.AC in my Custom double cab is amazing. May be the coldest system I have ever had in a vehicle.

I agree. My '19 is colder than my '16.  Those who are wondering about vent temp, invest in an A/C thermometer. That tells the story of how well your system is working.

  • Like 1
Posted
On 7/9/2019 at 6:55 AM, Controller23 said:

 

Setting of Lo, blower all the way up, seems to take forever to cool off the truck. Even after airing it out. I’m only in Wisconsin too, what about people in truly warm states?

 

My Tacoma would get so cold you could see your breath.

 

 

Sent from my iPhone using Tapatalk

 

Two words, sun shade.  Also preserves your dash.

 

I've also noticed, and this is kind cool I think, that if your making a hands free call through the truck blue tooth the AC blower slows down so you can hear and the truck mics hear you.  That function would definately affect cooling off a hot truck. (assuming you have the dual zone climate).

Posted
On 7/9/2019 at 5:14 PM, HondaHawkGT said:

Getting the windows tinted with a film that's designed to reject infrared energy helps a lot with keeping temperatures down and helping the AC to get the cab cooled faster. Ceramic tint is a popular one. I think my 2014 had a little more cooling power but as others have pointed out, the rear vents are pulling some of that cool air from the front vents in the 2019's. If nobody is back there, you could close the rear vents. That will give the front vents a little more flow. Also found that cracking open the rear sliding window helps pull some of the hot air out until the AC gets going. 

 

Pro tip: A few minutes before you're ready to jump in the truck, you can roll all the windows down on the truck.

(1) Press [Unlock]

(2) Release

(3) Press [Unlock] again and hold it for 3-4 seconds.

Do it right and all four windows will roll down to help get as much heat out as possible.

Explain (2) release . I cant get this to work on my 19 custom trail boss 

Posted

I'm assuming it's not an option on the custom level trucks.

Posted

Living in Phoenix where 100 can seem cool, I can tell you having a sunshade will do you wonders. That will aid in cooling the truck immensely.

 

The AC in my wife's '17 RX350 seems to be more challenged in the Arizona heat.

  • Like 1
Posted
2 hours ago, Windmill Greaser said:

Explain (2) release . I cant get this to work on my 19 custom trail boss 

stop pressing the button.

 

1 Press Unlock

2 Press and hold unlock

 

 

  • Like 2
Posted
4 hours ago, eppieguy said:

I'm assuming it's not an option on the custom level trucks.

I agree. Does not work on my Custom.

  • Like 1
Posted

I'm not sure if the feature is on the Custom or not, but it's off by default so you may just need to turn it on. In the Infotainment system. I don't have the exact steps in front of me, look for a Remote Window Down feature or something like that. I know it's available in my RST, I'm not sure which trim level it starts at.

  • Like 2
  • 1 year later...
Posted

One of reasons I didn't buy a Ram was because of AC issues I heard about....so cal gets toasty in summer so that won't fly....I dont want to have to re enginner their system to get proper AC....

Posted
2 hours ago, Dunn said:

One of reasons I didn't buy a Ram was because of AC issues I heard about....so cal gets toasty in summer so that won't fly....I dont want to have to re enginner their system to get proper AC....

My brother is on Ram no. 6. An 95 big daddy 5.9 2 door. Next up diesel modified banks 6 gun. Then 3 hemis. The latest  brand new 21. I had 3 in that time. His shop foreman 2 in the last five years. I could go on. We live in south Texas. Never an AC cooling problem. A problem like that here wouldn’t stand. Never. 

Posted

interesting, seen multiple peeps complain about AC on them, random issue i guess

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • If anyone lands here looking for an update - the problem wasnt with the hose, the clamp, etc... I purchased a metal Thermostat housing that just must not of been made to spec. It just wouldn't plug up the hose.. Went back to a plastic cheap housing - leak fixed. Some plumbers tape carefully placed in tandem with a clamp likely would've gotten the job done.   Best,
    • For anyone following, this is what I have deduced from this forum - and my very specific niche case. Please do let me know if you see me going in the wrong direction here. For context, I have a 16 sierra 1500 w/t. Has TC and Cargo light switches. Removed the switch to find the X1 and X2 of the S48A connection populated with wires (x1 10-14, and x2 1-5).   Took photos of the X61A-X5 to find the wires from S48A-X1 land here at their respective pins (10, 11, 17, 23 on the X5). Was hopeful that this means my X51A fuse box has the appropriate pins... No cigar. So now I will be routing wires from the rear of the X61A-X1 to the engine bay and to their respective negative relay triggers. Please see to the diagram. If any has insight as to where the S48A-X2 pins 4 and 5 land that would be awesome.   Note: please disregard fuse sizes. Main fuse will like be 25A, all mini bus fuses will likely be 10-15A   Cheers
    • 287,500 Mile Service   8/13/2026   Reset Fuel Trims   Since the work done in the previous post there was a good improvement in response in all areas except right after a fill up where the LTFT would go -20%+ for about four miles while the STFT was near neutral. Before the work they both went very negative for a few miles after a fill up but act normal thereafter.    We did a systems check of the vapor recovery system for functionality and ability to hold a vacuum. That checked out fine. But this doesn't mean the charcoal canister is dead in the water. Testing that is next up. For now the reset of the fuel trims.    I intentionally shorted the fill exactly two gallons to eliminate any chance of filling the canister. On start up the trims were behaving normally until I got up and rolling where the LTFT went -10 / -11%% but the short was + 2 to 0%. Within a mile the the STFT offset the LTFT and by 2 miles they were neutral. HUGE improvement but still not hunky-dory.    I'll watch them for a few days. Perhaps another tank where I will fill completely to 'first click' and compare. Meanwhile on the hunt for a new canister and I'll toss another purge value at it for good measure. Pending the outcome of the canister test that is. Progress of any kind is welcome.    Fuel economy improvement with bringing hole #3 back to the living was a noticeable bump to the positive. Even on the few miles I drove after the refill I already see another bump up by the trims reset.     She's purring like a kitten with a warm bowl of milk.    BTW, adding 50 rpm to the idle took the majority of the negative timing out on cold start up and leaned the cold idle. No longer burbles in the cat. What a dumb way to heat a cat.      
    • Yeah, shame I can’t really get that filter easily anymore. Running a PureOne. Your fave!    TAN would be neat to see. Confirmation I ran it too long probably. 🤣
    • My son and I both bought new trucks in 2017. Both of us immediately put Truck Covers USA American Roll Covers on our trucks. My son still has his truck and it never sees the inside of a garage. We live in Alabama, so not much snow. My truck was my daily driver and was in the garage when I wasn't driving it or at work. No issues with either cover even after almost 9 years. About a year ago I sold my truck to my brother and bought a 2025 Silverado 2500. The second thing that I put on that truck was a new Truck Covers USA cover. They are very well made and have a very positive locking system. I looked at a Retrax and my concern was the way that the cover locked to the rail. BTW, the first thing I put on the new truck was step bars. Those new trucks are high!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...