Jump to content

Recommended Posts

Posted

Hello

I am not sure if this been talked about before. Anyways, I noticed a noise coming form the dashboard -i think-. This happen only if I go over light bumps and specially if its on a ramp so while truck is flexing ex: going in/out the gas station that had a bit of a ramp on the entrance. The noise sounds like a loose bolt or clips. It is not loud but always there and driving me insane.

 

Any one experienced something of this sort and know what it going on. Please enlighting me.

 

 

Thank you!

 

Posted
6 hours ago, Mountain boy said:

On my GMC it was the tray on the dash dealer fixed it. I could push on it and make it rattle. 

Thank you. I will try that in the morning

Posted

there is a bulletin about noises coming from the dash

 

it can be the inverter or they used the wrong size screws in behind the radio or whatever... 

 

just take it to the dealer , its under warranty 

Posted
On 10/27/2019 at 1:27 PM, jay webb said:

there is a bulletin about noises coming from the dash

 

it can be the inverter or they used the wrong size screws in behind the radio or whatever... 

 

just take it to the dealer , its under warranty 

Took it to the dealership and after 3 hours the verdict was they could not find anything and they said the only thing they can do is for ne to leave it there for couple weeks so they can tare the dashboard apart and try to look for the issue and he said might not be able to find it after all. After agreeing to that they want to give me a rental Cruze. I said no thank you. Will take my truck. For one I don't really have much trust in them and second I don't want them to take the dashboard apart and not being able to put it back together or half ass it and make it worst.

Posted (edited)
4 hours ago, oldmann said:

Any chance you sun visors are unhooked from the clips?

Tried that. And I went under the dash and everything was so loose made me wonder what type of quality control the folks at GM are running.

Edited by Moend
Posted
4 hours ago, Moend said:

Tried that. And I went under the dash and everything was so loose made me wonder what type of quality control the folks at GM are running.

Wow, that is terrible.

  • Like 1
  • 4 weeks later...
Posted

Update #1

buckle up guys this is going to be a long one.


So went to the second Chevy dealer in town and had one of the worst experience - the technician was not interested in working on my truck because it needed a little bit of digging and it was not something that he had done in the past - basically the dude flat out told me he never heard of something like this before and not sure where the noise is coming from and proceeded to tell me there is nothing he can do his actual words were (it sounds to me like just a clunking noise and we will not fix rattle noise because we don't want tie up the shop working on that sort of thing) I was thinking I better leave them alone - curing cancer and what not

 

Went home and thought to myself maybe I should bring it to the last GM dealer in town (GMC dealer) but hey they are somewhat similar, went there on Tuesday and they were much nicer, the service manager went with me on ride hit couple bump along the way and he was like yup this does not sound normal, asked if he can drive it back and sure thing he did drive it back and was able to reproduce the noise over small bumps - back at the shop he set me up with a loaner car smaller suv and told me he will call and update me, he didn't and I decided not to bug him on the count of him saying it might take couple days.

Fast forward next day Fri after work I called, they were like yeah the manager is driving it now with the tech and you might have to leave it over the weekend, we will call you when we have an update.

 

Monday: they called me at 4ish and said they found the issue - a rubber pushing in the suspension that was installed incorrectly at the factory, they have it order and will get it installed the next day.

 

Tue: no one called, so I called at 4ish they said the part they replaced did';t fix the issue and they have to order another pushing and will let me know by Wed.

 

Wed: no call - left them alone and didn't call

Thursday: I get a call around noon that the truck is ready, I go to pick it up after work and what a disaster the interior is filthy and greasy - I was like no problem i can clean a dirty truck, took it for a ride and surprise surprise the popping clunking noise is still there went back and requested to talk to the shop manager and he was different this time, informed me that he drove it early afternoon and the noise was gone - so I took him for a ride.

 

Here the manager start to change his story and tell me they thought that I said the noise was coming from the back - that got my blood boiling and I made sure to let him know. I was furious. long story short - truck is worse now and they are going to e-mail GM and let me know. all what they did is replace couple of pushing over the rear suspension ziptied couple of foam pieces over the hood release cables and that was it - not sure how they managed to make the noise worse but that could be from all the test drives over bumpy roads made it worse. IDK

 

The thing that worries me the most is that I am not sure if this is a safety critical item or not - my father retired mechanic said it could be cab bolts if ball joints and tie rod are not an issue. I don't want a wheel come flying off while I am driving or towing not only for my safety also for others who didn't make the decision to buy a GM product.

 

will keep you guys posted...

Posted

In my quad State area, GMC/Buick dealer's will not do warranty work on Chevy's or vice versa under normal conditions......only if it is a breakdown requiring a tow to the nearest GM dealer or an out-of-town emergency where impractical or unsafe to drive to a different brand GM dealership.

 

There's no way I'd ever leave a perfectly functional vehicle overnight at a dealer, especially for a noise. Just as easy to return first thing the next day, wait  and know where it has been and safely stored in the interim. GM will not reimburse for endless hours looking for a stupid noise that is not traceable to a component failure......if they can't find it in less than 2 hours, they never will! So rest assured no one was wasting hours, much less days, looking for a noise....mechanics may have taken it home "looking for a noise" and using it for who-knows-what in the interim. I made that mistake once and ended up with a parking ticket received for illegally parking in front of a bar at a time when it was dropped off at a the dealership for repairs - (also might want to check under the seats for beer cans or discarded condoms)! And I wouldn't hold my breath or get more aggravated waiting for future satisfaction from the dealer or GM.

Posted
13 hours ago, Thomcat said:

In my quad State area, GMC/Buick dealer's will not do warranty work on Chevy's or vice versa under normal conditions......only if it is a breakdown requiring a tow to the nearest GM dealer or an out-of-town emergency where impractical or unsafe to drive to a different brand GM dealership.

 

There's no way I'd ever leave a perfectly functional vehicle overnight at a dealer, especially for a noise. Just as easy to return first thing the next day, wait  and know where it has been and safely stored in the interim. GM will not reimburse for endless hours looking for a stupid noise that is not traceable to a component failure......if they can't find it in less than 2 hours, they never will! So rest assured no one was wasting hours, much less days, looking for a noise....mechanics may have taken it home "looking for a noise" and using it for who-knows-what in the interim. I made that mistake once and ended up with a parking ticket received for illegally parking in front of a bar at a time when it was dropped off at a the dealership for repairs - (also might want to check under the seats for beer cans or discarded condoms)! And I wouldn't hold my breath or get more aggravated waiting for future satisfaction from the dealer or GM.

Funny you had mentioned that. Because I went to the dealership after hours to make sure it was parked indoor and was able to see it in the work bay every night - and made sure to tell him not to leave it outside or take it home. There is a lot to the story than what i shared but I figured to focus on the important bits.

 

The sad part that the Tundra was the runner up when I was shopping and boy do i feel like an idiot for wanting an American vehicle ☹️

  • Like 1
Posted
10 hours ago, Moend said:

Funny you had mentioned that. Because I went to the dealership after hours to make sure it was parked indoor and was able to see it in the work bay every night - and made sure to tell him not to leave it outside or take it home. There is a lot to the story than what i shared but I figured to focus on the important bits.

 

Even more of an inconvenience, but worth the piece of mind. You gotta keep them honest..........Don't trust, and verify.

  • Like 1
Posted (edited)
15 minutes ago, Thomcat said:

Even more of an inconvenience, but worth the piece of mind. You gotta keep them honest..........Don't trust, and verify.

True. I mean there are good people out there problem is, there is some bad ones too

Edited by Moend
Posted

You should have searched this site and  you probably would have found the post concerning the 2 screws on the under side of the dash that were factory installed finger tight. After tearing into the suspension (twice?) and what not you are guaranteed to have all kinds of loose-noisy happening and it will only get worse in time.

Best of luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...