Jump to content

Silverado LTZ/High Country LED Tail Lights $440 w/ OEM Harnesses

youn1033
 Share

Recommended Posts

youn1033 Enthusiast

youn1033

Posted
Posted (edited)

(Updated to reflect I have purchased BRAND NEW OEM LED Harnesses to accompany these lights)

For sale are my Chevrolet LED Tail Lights. I originally purchased these to replace my existing tail lights but had a change of heart and painted my existing housings instead. In great shape and will be cleaned and polished for new owner. Asking $440 ($470 shipped)

 

If you have any questions or want additional pictures, shoot me a message,

Tail Light 1.jpg

Tail Light 2.jpg

Edited by youn1033
Additional Parts
  • 2 weeks later...
alexg Enthusiast

alexg

Posted
Posted
Are these still available?
i have a set like new w harness uncut for 530 shipped if interested 40be0b38ce1e411e9d523c7710eafe38.jpg20190701_224150.jpg20190701_224143.jpg

Sent from my SM-N975U using Tapatalk

  • 2 weeks later...
youn1033 Enthusiast

youn1033

Posted
  • Author
Posted

Still available and the harnesses can be purchased for around $130. If someone wants a harness with them that bad I'll be happy to buy it and sell it for $550 shipped all together.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • revmanii
      Starting a new thread regarding mounting my 2014 OEM wheels to my 2026

      By revmanii · Posted

      The BORA 3/8" spacers arrived yesterday along with the extended lug nuts. I got the front wheels changed out today, but was overheated and covered in sweat so bad, I figured getting both front wheels done was a win, and took a cool shower. Hopefully, I'll go out tomorrow morning before it gets into the 80+ temps and do the backs. After getting the first wheel snugged up, I backed out one of the lug nuts then hand turned to count threads. I believe I stopped counting around 12-13, so I think I'm good there.    
    • Atlas
      2027 GMC Sierra: Official Discussion

      By Atlas · Posted

      My fullsize truck is averaging over 26mpg so I'm pretty happy with the increased fuel economy targets. When I had my gas Silverado (2020 5.3) it was averaging 21. Again, for a fullsize truck, that's very different from the 12-15 these things used to get 30 years ago.   Whine all you want, increased MPG is a good thing.
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That is a fair point, and I think an OBD-first proof is probably the right next step. I agree that the value is not the hardware box by itself. The marketable part would be the software: always-on capture, baseline learning, event reduction, system-specific reports, and alerts. Also agreed that if an OBD device is always plugged in and has local storage, it should not miss the event in the same way that a scanner plugged in after the fact would. The only thing I would not want to assume yet is that an ELM327-class device gives all the late-GM data needed at the rate needed. Standard OBD live data, DTCs, freeze frame, Mode 6, VIN, and calibration information are definitely the right starting point. GDS2 also proves that a lot of useful ECM data can be viewed through the DLC without needing a DTC first. The question I need to test is whether the data needed for a useful GM V8 event report is actually available through the DLC, and at a useful sample rate: - misfire counts / roughness by cylinder - AFM/DFM state - oil pressure and oil temperature - fuel trims - voltage / reset context - U-codes and communication events - calibration / software information - whether these are standard PIDs, enhanced DIDs, Mode 6 data, GDS2-only data, or not available So I think the right benchmark is: 1. Build the OBD-only version first. 2. Keep it plugged in and logging locally. 3. Compare it against GDS2 / freeze frame / HP Tuners or another higher-end logger. 4. Measure which parameters are available and at what update rate. 5. Only justify ECM-side hardware if it captures useful evidence the OBD version cannot. So you may be right: the consumer product might simply be an always-plugged-in OBD event recorder with much better reporting. A question for you: when you say ELM327 devices can already deliver all the data needed, do you mean generic OBD Mode 01 data only, or GM enhanced data as well? For a useful GM V8 report, would generic OBD data be enough, or would you expect the tool to include enhanced items like misfire by cylinder, AFM/DFM state, oil pressure/oil temp, U-codes, and calibration information?
    • Buckwild27
      Gas Prices

      By Buckwild27 · Posted

      I agree. 
    • Atlas
      Gas Prices

      By Atlas · Posted

      87 down as low as $5.14 here... winning!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...