DIY Multipro Tailgate Speaker System

[B33tl3]

I asked Kicker about the wiring harness here is the reply

 

"We have the harness pack available for purchase for $99.95 plus tax. To order this part you can call (800) 256-0808 and ask for Customer Service. The part that you need to order is 46MPGHARNESSES."

[Eddie_H]

Hello,

Would it be possible to buy the STL files to print my own pieces..

 

Thanks

[Rbarganier]

How are yall DIYers mounting your amp?

 

[mhadley38]

When I 3D print the BT Controller the top of the Triangle does not come together. it leaves an open space.

Can anyone tell me why?

 

[Patches2]

Looks like it might need a support for bridging above the large rectangular opening. Are you using supports? 

[mhadley38]

I am using supports. the USB one comes out fine. But the BT does not. Just wasn't sure if there was something up with the code.

[eddienyr]

Are these kits still available? FYI the harness has to be ordered thru the dealership or maybe even an audio shop, you can't order directly from Kicker.

Edited March 18, 2024 by eddienyr

[eddienyr]

Is this kit available?

Edited April 15, 2024 by eddienyr

[mattschu]

On 4/16/2021 at 12:06 PM, shawnmason01 said:

I have mine working. I had to reprint the parts with PETG filament to make them UV and sunlight resistant. The first ones warped.

 

I wired in a power switch as there are times I will use the system without the tailgate down (for example when camping and I have my hitch in). I also, just ran a standard amp wiring kit along the undercarriage rather than cutting into or modifying my 7pin connection. The 10 Gauge wire was much cheaper than buying the $90 pigtail.

 

BT Controller - https://www.amazon.com/gp/product/B00WVTS4R4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

4" Marine Speakers - https://www.amazon.com/gp/product/B08P7CKXBD/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

USB port - https://www.amazon.com/gp/product/B07SWZRFRS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

Wiring Harness and Wire - https://www.amazon.com/gp/product/B08FRRC4RN/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1, https://www.amazon.com/gp/product/B01C7O7Z68/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

 

Power Switch - https://www.amazon.com/gp/product/B07P68NFXZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

3d Printer STL Files (I printed them with PETG, and only did supports on the speaker mounts).
 

- Speaker mounts (these have a lip the slides under the tailgate metal, is is tightened down when you screw the speakers in https://www.tinkercad.com/things/cYdAZhWyiD6

 

- Blue Tooth Controller https://www.tinkercad.com/things/j6kqISHpcYt

 

- USB Port Panel - https://www.tinkercad.com/things/ldsRsnBkZs0

 

 

Here are the components I used

 

[mattschu]

Shawnmason01 have you or would you consider making a set of inserts and selling them. I would like a set. 

[tad781]

@shawnmason01 do u happen to have the .gcode for those pods? I bought everything now just trying to make these