Jump to content

Recommended Posts

Posted
7 hours ago, wtfandy said:

What's the break down on what you got, what you paid? Curious if they upped they're offers.

Financed for 41K 14 months and 12K miles ago.  Givemethvin gave me $40,250 (first offer was like 38K, but they beat Carvana's offer by a couple hundred bucks). 

 

According to one dealer I talked to they told me the truck had a net retail value of $39.5K brand new lol.  

Posted
1 hour ago, Philipgonzales3 said:

Financed for 41K 14 months and 12K miles ago.  Givemethvin gave me $40,250 (first offer was like 38K, but they beat Carvana's offer by a couple hundred bucks). 

 

According to one dealer I talked to they told me the truck had a net retail value of $39.5K brand new lol.  

Very nice! I saw the new truck too you posted up which looks great

  • Like 1
Posted
1 hour ago, UGADawgs said:

Carvana for me:

image.png.3018f3401c980e9c6b592eede02667b0.png

That's what I got as well.  Over a week now and still no contact.

Posted
9 hours ago, UGADawgs said:

Carvana for me:

image.png.3018f3401c980e9c6b592eede02667b0.png

Yep, same here. Tried 3 different times, nothing yet.

Posted

Why would you want to sell to someone who will give you a lower price then you would selling privately? 

Posted
1 hour ago, Colossus said:

Why would you want to sell to someone who will give you a lower price then you would selling privately? 

I'm just wondering at the moment, only because of the window leaking for the third time. Not that many private buyers looking for trucks in the 40K+ range I wouldn't think.

Posted

Also, depending on where you are, you can save sales tax when trading in vs selling privately & buying from a dealer, as you only pay sales tax on the difference in value between the new/used vehicle when trading in, but you pay full sales tax buying the new vehicle, but don't get any sales tax "back" when selling the used vehicle privately.

Posted
On 8/10/2020 at 12:15 PM, Wiggums said:

 

I don't buy used.. and there is no reason to when the Silverado have fantastic re-sale value.

All used car dealers have bad reviews. 75% of dissatisfied customers will post a review while 75% of satisfied customers will not bother.

Grain of salt.

i didnt buy used because new trucks were same price and some even less than newer slightly used......was kinda shocked really

Posted

Ok, I figured out their system. You cannot change any options. Then you get a base price. From there, you'd have to talk to them about the options. That is the only way I can get the page to spit out a price. 

Posted

I hit them up on chat and they're doing it on the backend with the features provided in the chat. We'll see what they say.

Posted

So this is hilarious.

 

When I filled out the carvana form with no extra features, they said 44,786. After spending 15min on chat and having them manually add those features, the new estimate is 42,000. uhhh, ok. 

 

GMTV offered 44,500. 

2019 LTZ Z71, all options but front camera, added running boards and tonneau.

Still thinking I'll wait it out for GM to fix the rear window for good or I'll replace it with solid glass once over 36k miles. Otherwise, I still really like this truck.

  • Like 1
Posted

This is where you dump your leaky window and SU4 axle trucks.  No need for all that lemon crap. ?

Posted

Thanks to this forum with putting the idea in my head :) Just sold my 19 Silverado RST to Carvanna with convenience II package, 4wd, 5.3 for $44,942.00. Had 12,300 miles, bought last year for $43,000, MSRP was $53 and some change.  Really easy transaction too, just meet at Carvanna store in OKC, 10 mins later, I had my check. Still in shock I was paid that much, bought a 2020 GMC AT4 with 6.2 today!

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...