Jump to content

Off-Roading with the Single Speed Transfer Case: 4.3L and 2.7L

Justin Holland
 Share

Recommended Posts

econometrics Senior Enthusiast

econometrics

Posted
Posted

I used 4L twice already on my RST 5.3L. Once when turning around in an approach with a really step embankment on both sides, and the other in my driveway yesterday morning when I got stuck over the curb pulling out too wide from my garage with my nose pointed downhill. Lol 

 

In both of these instances, I'm sure 4H would have worked fine. But I liked having the 4L option since you can more accurately control your throttle-to-wheel speeds with more ease. 

redwngr Senior Enthusiast

redwngr

Posted
Posted

For those considering 4wd for the first time be aware that the shifts between 2wd, 4HI and 4auto can be made at any normal driving speed. 

 

Shifting into or out of 4LO requires that speed be 3mph or less (moving a little is better than stationary) and the transmission must be in neutral. 

 

4LO has it's place, but it is much less convenient to activate.

 

 

Gangly Senior Enthusiast

Gangly

Posted
Posted

I've used 4 low a couple times now, mostly with extraction/recovery of other vehicles, and the ability to keep the tires from blowing away if I gave it too much gas was nice.  It's kinda weird to hear the engine working hard and not have that "herky-jerky" throttle response, the 4 low made things much smoother.

 

I would agree with the above statements though, 4 low isn't truly necessary and a single speed transfer case with a locking rear dif would be perfectly capable in 90% of what most people perceive to be off roading.

  • Like 1
  • 3 weeks later...
SSTODD Enthusiast

SSTODD

Posted
Posted
On 2/3/2021 at 2:50 PM, Justin Holland said:

I am a 2.7L fan boy now, they only come in single speed. 

I have an Elevation 2.7 4x4 with the 2-speed so this is an option available with the right trim package.

redwngr Senior Enthusiast

redwngr

Posted
Posted

NP0    Transfer case, single speed, electronic Autotrac with push button control (4WD models only)            

(Std on Base, SLE, Elevation and SLT 4wd's)

 

 

NQH    Transfer case, two-speed, electronic Autotrac with push button control (4WD models only)
Base sierra -  Included and only available with (X31) X31 Off-Road Package or available as a free flow option on TK10903. 
SLE and Elavation -  Included and only available with (X31) X31 Off-Road Package. 
SLT -  Included and only available with (L87) 6.2L EcoTec3 V8 engine or (X31) X31 Off-Road Package. 

AT4 and Denali - standard

 

TK10903 is reg cab 4wd

redwngr Senior Enthusiast

redwngr

Posted
Posted
6 hours ago, Justin Holland said:

Can you share a picture of your 4wd buttons please?

If the elevation has the x31 package it will have the (NHQ) 2 speed transfer case

image.png.20d51bc00af02e6818db975639008db2.png

 

 

Otherwise it has the single speed (NP0) box and control:

image.png.3f275f2c65f4f7ec138f95d5d1fd851d.png

 

 

  • Thanks 1
OnTheReel Senior Enthusiast

OnTheReel

Posted
Posted

No 2 speed with the 2.7 because that engine can’t be paired the Z71/X31 packages. Simple as that. The only trucks that get 4 low without any off road packages are the 6.2 trucks, and Denali.

  • Like 1
  • 3 weeks later...
Dunn Senior Enthusiast

Dunn

Posted
Posted

yep, says x31 not offered with 2.7 turbo engine....have to switch motors

  • Thanks 1
  • 1 year later...
Wesley Dodson New Member

Wesley Dodson

Posted
Posted

I just bought a 22 and didn't realize it didn't have lo range but I would think with thw 10 spd trans it wouldn't be much of an issue 

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

 it didn't have lo range but I would think with thw 10 spd trans it wouldn't be much of an issue 

 

Not understanding that logic?

SilveradoRST Enthusiast

SilveradoRST

Posted
Posted

It’s been 4 years (2019) with the single speed transfer case in the Silverado/Sierra 1500s.  I can’t find any YT videos on anyone testing the Terrain Mode in the real world.  Interested to see some.  

newdude Senior Enthusiast

newdude

Posted
Posted

I've used the Terrain Mode once to try it on my 2.7T with the single speed transfer case.  Boy do the brakes grab that thing.  It's as if you were two foot driving but the ABS is being used to clamp the brakes instead of your foot.  You have to push the gas pedal pretty good to overcome the resistance.

 

Anyone looking for a Silverado with the 2.7T and the two speed transfer case, the only way is to step to a Custom Trail Boss or LT Trail Boss.  Those both have the 2 speed transfer case as standard equipment.

 

At camp GMC, the 2.7T is with the single speed case only.  

dgstarr63 Enthusiast

dgstarr63

Posted
Posted

I live at the top of a steep dead end road that intersects with a busy road at the bottom. I use low range for hill descent when there is snow or ice on the road. As long as 2 speed transfer cases are available, I will purchase them.

  • Thanks 1
superdashdad Enthusiast

superdashdad

Posted
Posted (edited)
On 2/23/2021 at 11:13 PM, OnTheReel said:

No 2 speed with the 2.7 because that engine can’t be paired the Z71/X31 packages. Simple as that. The only trucks that get 4 low without any off road packages are the 6.2 trucks, and Denali.

High Country also has 4wd low and that is the only trim chevy or gmc that you can get with 4wd low along with the max tow package as far as I am aware, at least on refreshes.

Edited by superdashdad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
    • Coastie05
      ‘25 Silverado purchase- back to dealership for bumper/radio issue

      By Coastie05 · Posted

      Hope it all works out for you. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...