Jump to content

How long before taking a road trip.

GN2018
 Share

Recommended Posts

GN2018 Enthusiast

GN2018

Posted
Posted

I’m going to get a new truck this week.  I also want to go see a family member.  The trip is 700 miles (1400 round trip).  How long would you wait until you take a trip like that with a new car?  I recall engine break in requires that you not hold a steady speed for extended periods for the first 500 miles, if I recall correctly.  I could make sure I vary the speed by taking some back roads or just varying my speed on the expressway.

 

The other concern would be taking a trip in a untested vehicle.

 

Wondering what others think. I don’t want to wait but seems like 500 miles would be prudent to have on it before I take a trip.

CamGTP Senior Enthusiast

CamGTP

Posted
Posted

The second I left the lot I would have zero issue driving it hundreds of miles.

  • Like 5
Rob Mugs Enthusiast

Rob Mugs

Posted
Posted (edited)
4 minutes ago, CamGTP said:

The second I left the lot I would have zero issue driving it hundreds of miles.

+1

 

Let'r rip.  With it being this new, you'll be all set if things go sideways (highly unlikely) 

Edited by Rob Mugs
1454 Enthusiast

1454

Posted
Posted
I’m going to get a new truck this week.  I also want to go see a family member.  The trip is 700 miles (1400 round trip).  How long would you wait until you take a trip like that with a new car?  I recall engine break in requires that you not hold a steady speed for extended periods for the first 500 miles, if I recall correctly.  I could make sure I vary the speed by taking some back roads or just varying my speed on the expressway.
 
The other concern would be taking a trip in a untested vehicle.
 
Wondering what others think. I don’t want to wait but seems like 500 miles would be prudent to have on it before I take a trip.
I can't say I did it the right way, but mine had 29 miles on it when I took it to work my first week with it. I've had it 3 weeks now and 2700 miles. So.....
  • Like 1
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
43 minutes ago, GN2018 said:

 I could make sure I vary the speed by taking some back roads or just varying my speed on the expressway.

This, not 100% necessary, but it will put your mind at ease, and give you a chance to see how truck drives in different conditions.

 

Think of it as a really long first date🤔😬

Edited by JimCost2014
KARNUT Senior Enthusiast

KARNUT

Posted
Posted

Most people buy a new car just before a road trip. That’s usually the excuse. I usually broke them on the test drive. Pedal to the metal.


Sent from my iPhone using Tapatalk

  • Like 4
Gangly Senior Enthusiast

Gangly

Posted
Posted

I was very easy on the vehicle the first 500 miles, then I drove it like a normal vehicle after that and put 7K miles on it in the first three months.  I usually wouldn't take a new vehicle on a long trip until I've had at least 1,000 miles on it, not because of drivetrain worries, but because of electrical gremlins that always seem to pop up in the first 1K miles.  This truck had a bad battery that decided to give up the ghost within a week of owning it, and if I had been on a road trip I would have been screwed.

econometrics Senior Enthusiast

econometrics

Posted
Posted

My truck had half the "break in" mileage on it by the time I got it home from the dealer. 150 miles for the dealer to get it over to them from a different dealer in TX, then 150 miles home for me. 

 

I wouldn't worry about it one bit, OP. Just get it and drive it and enjoy it! 

  • Like 1
Grumpy Bear Senior Enthusiast

Grumpy Bear

Posted
Posted (edited)
13 hours ago, GN2018 said:

 I recall engine break in requires that you not hold a steady speed for extended periods for the first 500 miles, if I recall correctly.  I could make sure I vary the speed by taking some back roads or just varying my speed on the expressway.

If you read that procedure is says "no need for and elaborate break in" like we did in the 50-60's but it does not say that a break in is not required; it is. It further states it "will run better in the long run." Then it goes on to give you an outline of a much simplified break in for you to follow. 

 

With that now clear and given your wilingness to comply (quoted above) the remaining part of your question lays in the trust you have to execute the break in and your trust in GM and the guy that drove it the first 150 miles 😉  

 

13 hours ago, GN2018 said:

Wondering what others think.

 

That's what I think.  

Edited by Grumpy Bear
OnTheReel Senior Enthusiast

OnTheReel

Posted
Posted

Just run it. My truck was a dealer transfer that had over 100 miles on it when I got it. I’m sure the people who drove it there on the highway didn’t exactly take it easy or vary speeds. They probably beat on it like I do. 🙂

 

And I would hope you can trust your brand new vehicle to make a 700 mile trip without issue. 

  • Like 1
TNTSierra Senior Enthusiast

TNTSierra

Posted
Posted

Every vehicle I have owned on first test drive. I drove it like a stole it. Told salesman to hang on and I have floored every single vehicle. On way home after buying them I always check out the governor limit in them too. The new Acadia ****** down at 132. Man it’s fun!  Good luck and have a great time in your trip. No worries, just fun!!  

GN2018 Enthusiast

GN2018

Posted
  • Author
Posted

Thanks for the replies.  I think I'll do it half a$$, which is typical for me at times.  I have a shorter trip that I can take back roads to see my daughter.  With that trip, I'll put about 200 miles on it and just take it easy.  Give me a chance to get use to everything and it to me.  Then, I'll go on my trip.  Going in about an hour to pick it up.  Just a little excited. :)

  • Like 1
Minnvmax Enthusiast

Minnvmax

Posted
Posted (edited)

Why would someone pay the price they are asking for these new trucks and not follow the instructions in the manual for break in?!?! I try to follow the break in procedure in the owners manual and that doesn't include hitting the expressway especially for an extended trip.  I hear the same thing in recreational forums. "Drive it like you stole it" . Whatever. I've always gone with mfg recommendation on every engine I have owned and I have never had problems. Autos, ATV's, Sleds. This is exactly why I don't buy used equipment. You cant trust anybody to follow directions. 

Edited by Minnvmax
  • Like 1
  • Thanks 1
TNTSierra Senior Enthusiast

TNTSierra

Posted
Posted
1 hour ago, Minnvmax said:

Why would someone pay the price they are asking for these new trucks and not follow the instructions in the manual for break in?!?! I try to follow the break in procedure in the owners manual and that doesn't include hitting the expressway especially for an extended trip.  I hear the same thing in recreational forums. "Drive it like you stole it" . Whatever. I've always gone with mfg recommendation on every engine I have owned and I have never had problems. Autos, ATV's, Sleds. This is exactly why I don't buy used equipment. You cant trust anybody to follow directions. 

To each their own. I’ve never followed a break in period. I do required maintenance on my vehicles with my father, but the break in cycle to me is bogus. It’s a way for manufacturers to cover their @sse$$ when “someone “ redlines there vehicle out of control and blows the vehicle up.

I have 2 Kawasaki jet skis that have been  driven full speed since hour number 1. They are 10 years old now and all I’ve replaced are the batteries. 
 I have a 4 year old Stingray boat and I’ve driven that full throttle as well. Haven’t had issue with it. 
I live in Iowa and bought a MTD snowblower and first day used it had 6 foot drift in driveway and that baby got work out. Took in for small motor service recently and the older gentlemen stated “wow, can’t believe how clean it is and how well it runs for a 2009. 

Never had I had an issue with any of my vehicles when it comes to engines. The only issue I’ve had was my 2006 SS Trailblazer with transmission issues but I bought that used and they were known to go out. Once a beefed it up. Nothing happened again and I put 70k HARD running miles on that and motor was still strong. 

ai am closing on my new house in 2 weeks, I picked up a 42 zero turn cub cadet and you best believe that baby will be getting a workout on my acre of land!!  

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I had skimmed through that article when you posted the link and honestly I felt rather defeated in a sense and realized that all these years in changing oil that in fact putting in what I was told was a good quality oil was probably not filtered as well as it should be although the filter put on the engine would be what ( as long as it never went into bypass mode ) would be the final filtering of the new oil that the engine components would first see, but then the filtering media itself is not up to par to what is ideal because a full flow filter would be too restrictive to filter fine enough for the engines best outcome in the long run. Only one of our tractors over the years which was a Versatile with a 855 Cummins had a separate bypass filter, some engine manufacturers did spec a partial bypass system within the main oil filter but I don't believe any other trucks or equipment I was servicing used such a filter. No doubt a product like the Amsoil bypass system is of benefit as long as nothing goes sideways with the extra plumbing and filter such as a rupture/leak that could cause the oil to pump out of the engine ( yes that Versatile had a remote canister with hoses routed to it as well ). With the idiot egr system on a diesel and as a result forcing a lot more soot into the oil, that certainly isn't helping the diesel engines cause or as you pointed out the GDI engine issue with creating more soot and aside from having a fancy secondary filtering system, changing the oil more often helping lower the total soot load.     So oil manufacturing and the end product is not something one can control and I wonder if there are specs on what various oil packaging companies produce in particle count or size. As to the filtering, if the OEM is not designing a filter size and spec that is really what it could be, they too are short changing the end user and so what is the answer. Of course as you say the oil side can only do so much if the air side isn't keeping up its end of the picture and air filters are only so efficient and if in a dusty environment such as farm or construction or driving gravel roads there is a lot of dirt to filter out and some of that ends up into the air stream.    Of course the irony in places like where I am where they dump the salt on the highways but also will mix in some calcium or outright pure calcium for problem road area's, or using calcium as dust control on gravel roads, the vehicle that gets used in that environment may rust out before a properly engineered engine and maintenance finally wears out so one has to face that reality in the rust belt. 
    • GAMark
      Road Master Active Suspension

      By GAMark · Posted

      Has anyone run these on their 2500?
    • Erfar
      Oil Change

      By Erfar · Posted

      have you stuck with dealer oil changes since then? I made the same switch after getting tired of crawling around under the truck, but I’ve found some dealers are way better than others about getting you in quickly. Curious if yours has been good about scheduling or if you’ve had to look elsewhere for quicker turnaround.
    • cherryred21duramax
      Can anyone decode a VIN to determine if this truck has had emissions issues or a recall?

      By cherryred21duramax · Posted

      Thank you.   I am set on a 3.0 Duramax as my previous truck with a Ford Ecoboost had just as many, if not more, "common" issues.  Cam phasers, timing chain issues, 10-speed valve body and CDF drum, emissions issues, etc.  So I figured, why not get 2x the fuel mileage (these things got 27+mpg on every mixed city/highway test drive I put them through) and better towing capability with resale value to boot?   My minimum, shortest trip will be 50 miles 1-way and I regularly go out of state with a travel trailer.  I'm planning on using this for a marketing/event promotion business also, which would require regular towing of trailers for bands, DJs, sound and lighting gear, along with my personal camera gear for filming events.   Looked at other trucks in the $30k+ price range but the issues seem to be everywhere, plus too many with gaudy mods.  I'm literally sticking with RWD trucks because they tend to be actually used as trucks, vs. the 4x4 models I've seen with unsafe lifts, huge tires, and general mods that would affect reliability (I'm wondering if some of them were tuned, hence the aggressive throttle response and hard shifting).   So my goal is to find a stock, 3.0 with 1 or 2 owners, in good physical condition, and decently well maintained.  Can't seem to find that up here, everything in the $27-30k range has had multiple owners, smoke smell, issues, or body damage.  Or the ridiculously modified trucks with 80k miles for under $27k but lots of problems...
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      That’s pretty tough Grumpy. I reread the previous few posts. They all reference oil changes. Much like your last thread. In my humble opinion it keeps things interesting.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...