Jump to content

Recommended Posts

Posted

I dunno what to tell ya there. I have a 4.3 4x4. I get about 15 around town IF I run auto 4x4. 17-20 if I put it in 2wd.

Posted

No mods and always in 2wd. Not dogging it either. Haven't towed anything yet. The truck is only a month old so I'm still babying it for now. On the highway I set the cruise control at 65 mph. I bumped up the tire pressure from the factory 35 to 40 psi cold to see if that might help slightly.

Posted

For what it's worth, it is still winter. Is it really cold where you are? You'll always see dips with cold weather..but my new 5.3 really is impacted by cold. On cold days I get 16.5 to 18.5....the last warm up we had I got over 20 easily. That to me is a huge swing in MPG due to temp.

Posted

I haven't really monitored how the cold effects the tunes yet, but it's obvious that it does, I get excellent MPG when it's 40+ but when it gets in the teens I would venture to say that I'm down 25% on mileage.

Posted

I have 4500 on my 5.3 and if I drive freeway I get great mileage but in town it's all stop and go and all one to two mile trips I can get as low as 9.8mpg

 

Short trips dont allow the motor to warm up to peak efficiency. And in stop and go, low mpg is to be expected. You cant take an average from a 1-2 mile trip. Its more accurate over several hundred miles.

 

 

Sorry guys. Guess I should have proof read my post. I meant I'm only getting 15 MPG.

 

Even if its only 15 mpg. there are more factors at play here. winter blend gas. cold temps. new engine break in.

 

How are you calculating? best way to do it is clear your trip meter on each fill up. then see how many miles you drive on the tank and divide by the number of gallons you put in. The DIC will sometimes be 1-2mpg off for the worse or the better.

Posted

I calculate by using the trip and a full tank. The DIC is always roughly 2 MPG or so more than the math shows. I know there's a lot of vairables for fuel milage, I'm just curious if everyone else with the 6 cylinder is getting around the same as me. I hate to drop it off at the dealer for something like fuel milage. Seems like most people went with the 5.3. I'm starting to wish I had.

Posted

Here in Michigan it's crazy temp swings. .. 20 one day 45 the next... And my mileage changes with the temp. ..I own a bipolar Sierra.

Posted

Had to chime in on temp swings. Lol not to bash ya but we had 70 degrees the other day and snow within 24 hours. Thats an Indiana temp swing lol. It will effect fuel milage for sure.

 

Sent from my LGL86C using Tapatalk

 

 

Posted
Here in Michigan it's crazy temp swings. .. 20 one day 45 the next... And my mileage changes with the temp. ..I own a bipolar Sierra.

 

Same here, same roads same conditions. It ridiculous! I wonder if a flashscan tune could fix this if Gm can't? A friend has a 2013 and it acts the same way, just not as extreme swings.

 

Sent from my SGH-I337M using Tapatalk

 

 

Posted

Just funny how GM hasn't said anything on this matter yet. I looked my truck up there was a problem with AFM before it left factory. website TIS2WEB input VIN# and show all the recalls and update before and after it was. built.

Posted

Just funny how GM hasn't said anything on this matter yet. I looked my truck up there was a problem with AFM before it left factory. website TIS2WEB input VIN# and show all the recalls and update before and after it was. built.

 

1 12663390 Main Operating System for Product Safety Recall 14008. 2 12659528 New calibration with diagnostic enhancements for DTC P0128. 3 12642488 Fuel System 4 12642600 Speedometer 5 12660170 New calibraton to address abrupt deceleration after an aborted shift. 6 12659743 New calibraton to address abrupt deceleration after an aborted shift and improve active fuel management operation. 7 12625016 Slave Operating System 8 12642481 Engine
Posted

I calculate by using the trip and a full tank. The DIC is always roughly 2 MPG or so more than the math shows. I know there's a lot of vairables for fuel milage, I'm just curious if everyone else with the 6 cylinder is getting around the same as me. I hate to drop it off at the dealer for something like fuel milage. Seems like most people went with the 5.3. I'm starting to wish I had.

I have the v6 and am getting really good mileage. The lowest I have gotten is in the 17's and the highest has been in the 20's. I think I'm averaging 18.3 or 18.4. No complaints on my side about mpg.

Posted

I have the 5.3 4x4 and surprisingly I get better mileage if I stay in the 40~50 mph range than anything above or below. I am thinking at higher speeds its the brick like aerodynamics and below 30 it doesn't seem to drop into V4 mode. So far the best I see is mid 22's at these slower speeds which is fine since I did not buy this as a daily driver.

Posted

I have a big issue that has popped up. I just filled up with E85 and after running about 100 miles the mpg looks dismal. I will not know for sure until I run a few tanks through. The issue and I guess you could say bright side is that this 5.3 engine loves the E85 you have to really be careful with the gas pedal as people will be staring at you because the rear tires are spinning on the slightest take off. you must gain over 50 HP with this alcohol fuel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...