Jump to content

Recommended Posts

Posted

Wow....thanks ...hope mine breaks in too....

 

Sent from my SPH-L720 using Tapatalk

How many miles you got on the truck?

 

 

Sent from my iPhone using Tapatalk

Posted

You can't just blame driving style. I had a 5.3 with 3.08 gears and my lifetime over 9000 miles was 14mpg. I would drive with the full intention of getting the best fuel economy possible, but it just wouldn't do it. It did have some good moments here and there, but when I went to a diesel 2500 I broke all my mpg records from that 1500.

 

It's a shitty problem to have because the dealers won't help out because it's easy to blame driving style.

 

 

Sent from my SGH-I337M using Tapatalk

i agree that is shitty. No way you can prove it to them that I know

 

 

Sent from my iPhone using Tapatalk -

Posted

Copying my post from another thread, for FYI here guysl:

 

Been emailing back and forth with Blackbear tuning about getting a tune done. They recommend running at lease 89 octane in the 5.3. See the quote below from my email with Justin at Blackbear. I will be more than likely using 89 octane from now on with the tune. I probably wont use E85 anymore because of the crappy mileage and its overpriced by me. Paid 3.72 for E85 last weekend, and 3.55 the weekend before that! Meanwhile since then regular gas has dropped below 3.70! The combination of an 89 octane and a tune from Blackbear, I'm sure I will see similar performance gains like when using E85 but with the gas mileage of regular gas.

 

Quote

 

The 5.3L does not *require* higher than 87, but it cannot burn 87 efficiently, ever. We've encountered thousands of them (2007+) and they all, every single one, ping on 87 octane due to the high compression ratio. The 2014s are slightly better than the previous model due to the direct injection, but are still not happy on 87. As a result, 89 octane will almost always pay for itself and will definitely be more consistent and more responsive. 91+ octane is not a necessity, especially not with factory tuning, but 89 octane is a win-win.

  • Like 1
Posted

^ Man I want a Blackbear tune soooo bad. Just haven't mustered up the courage yet. Ha

 

 

 

Just filled up again,

430 miles

23.1 gallons

18.61 MPG

I had more than a few "foot to the floor" runs on this tank as well messing with my buddies Tundra. :driving:

Posted

^ Man I want a Blackbear tune soooo bad. Just haven't mustered up the courage yet. Ha

 

 

 

Just filled up again,

430 miles

23.1 gallons

18.61 MPG

I had more than a few "foot to the floor" runs on this tank as well messing with my buddies Tundra. :driving:

 

 

Thats pretty good mileage. My numbers on regular gas are usually betteen 17-18 around town. With E85 I've been averaging between 14-15 around town. But dat powaaa

Posted

are you the first one to take off from a red light? If so that's why the mileage is so bad.

I'm always the first one off the line at red-lights and I get great mileage. For me it is sort of a game, both high mileage and not being left by traffic at a light.

 

I accelerate fairly slowly so it seems even worse to my fellow drivers if I'm caught napping at a light.

 

Two feet on the two pedals helps a lot. I am ready to go as soon as the light changes. I brake with my left always anyhow.

 

I use enough power to make sure I get up to a higher gear in a short time span. The grade/incline of the road makes a big difference in what gear/speed I seek to reach. I accelerate smoothly but often more slowly than other vehicles. When I reach my target gear/speed I transition to maintaining that speed. This is usually a calculated choice to lift my right foot just enough to stop all further acceleration.

 

I always tried to save fuel in my 2004 Silverado. It was frustrating and required ridiculous effort for small gains. These new DI trucks are well suited to stretching the fuel.

Posted

Best mileage is 25.4 and average 16-18 city. I don't drive like its a Sunday afternoon and like to open it up on the highway. No mods, still stock and lovin' every minute.

Posted (edited)

Hello everyone,

 

Just got back from a trip to San Diego, put about 1000 miles on my Sierra Denali with the 6.2L

 

Please keep in mind I live in Commifornia and we have the strictest emissions in probably the world.

 

Please also keep in mind I was 1 of 4 people in the truck with an estimated payload of 1,000-1,200 lbs (4 bodies plus various suitcases, laptops, coolers, etc)

 

Also, this trip occurred in 100* central valley heat for 62% of the miles

 

Truck is 2WD with Standard Box

 

Used 91 octane entire trip

 

Here are my real world MPGs with my 6.2L (truck is basically brand new, picked up in 2nd week of April, this was first road trip):

 

To San Diego:

 

IMG_20140630_143019_zps44119e5d.jpg

 

From San Diego:

 

IMG_20140703_164805_zps91745c23.jpg

 

 

I was extremely pleased with the 6.2L getting over 20 MPGs on a trip like this. When you account for the CA emissions restrictions on my truck, the valley heat, the payload, the L.A. traffic and the Grapevine (mountain range separating NorCal and SoCal)..... to get 20.8 MPGs on my return trip is outstanding IMO.

 

I kept the cruise control on 73 MPH on pretty much the entire trip (when I wasn't in traffic).

 

 

So count me as very impressed with these new engines from GM. I NEVER came close to these MPGs in my old 2010 GMC Sierra CCSB with the 5.3L

Edited by Mark L
Posted

Sounds pretty consistent with my results, in colorado I think we get a little better mpg. And I think my bedcover also gives me about .5-1 mpg.

I also know my dirt bike in the back will cost 1-2 mpg on the highway and once I accident my had the truck in 4wd auto which cost me about 1 mpg on a tank

 

 

Sent from my iPhone using Tapatalk

Posted

 

post-131214-140469771594_thumb.jpg My milage is getting better.....also I noticed when I drive 80+ I get great milage 20+ mpg...65 - 79 mph im getting 17.5 average mpg

post-131214-140469771594_thumb.jpg

post-131214-140469771594_thumb.jpg

post-131214-140469771594_thumb.jpg

  • Like 1
Posted (edited)

Cruised 115 miles the other day between 80/85mph. Avg 19mpg...Not too shabby.

**with 93 Octane**

Edited by Aaron1085
Posted (edited)

Cross country trip from Ohio to Arizona crew cab short bed 5.3 w/ 22" wheels 3.42 gears with around 4-500 pounds in the bed ypaqamu5.jpg averaged 70-80 mph the whole trip. 87 octane the whole way.

 

 

Sent from my iPad using Tapatalk

Edited by Dj0nes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • 87 down as low as $5.14 here... winning!
    • Progress... sort of.   Intake is disassembled, spider is out, fuel lines removed. Used a torch on the stripped screw with the lower intake off, much easier when I've got the intake sitting on my workbench, I made it talk. Walked right out with a pair of vice grips once it was nice and toasty hot.   New parts are piling up on my service cart waiting to be installed. Distributor, temperature sensor, new gaskets, fuel line kit, themostat, water neck.   My new pickle is I don't want to spend $600 on a replacement spider. I'm not sure IT is bad. I'm probably splitting hairs. Or it's $300 to send mine away and another 3 weeks of the truck just sitting. I have half a mind to assemble everything with the old spider to see if I can get away with just replacing the fuel pressure regulator to be safe. The obvious issue was the gushing high pressure fuel line which will be replaced. Getting to the spider really isn't that hard, and now I know what I'm doing , swapping it would be a breeze should it absolutely need one. Stupid, or smart?   The part that gives me pause is replacing the distributor. Well, it's already out. And I didn't mark it, whoopsie! Engine was at TDC when I removed it, I know that, so upon correct reinstall the metal tip on the rotor should point to the TDC mark on the distributor because that's where it was pointing on the old distributor. Worst case I'm a tooth off and have to re-stab it.   But then, what? I assume the truck will start. It doesn't appear the timing can be set. Here's the problem: These distributors can't be rotated but a degree or two, by design. What I read is Cam ****** needs to be -2 to +2 degrees, ideally at 0 (and checked/set above 1000 rpm). There should be enough wiggle to get that properly set, but checking the reported value is another potential issue. My Actron 9185 scanner says it supports enhanced GM PIDs and Cam ****** is one of them but it's unclear that I'll be able to correctly see it over OBD 1.5. I can see why people end up junking these things with life left in them. They're an absolute nightmare with tweener-year diagnostics/electronics and unobtanium parts.   Fingers crossed it starts and idles nicely. There can be hope, right? I'ma buy a lottery ticket the same day just in case.   Next steps..DO IT. I have not installed an intake before so I've been reading and watching a lot. Some say NO RTV except on china walls, some say DO RTV on water ports but not fuel/air intake. 1/4 or 3/8 bead on China walls? I think my strategy will be, obviously, RTV china walls with overlap on the gasket corners. Chapstick-style RTV the water ports. Leave intake ports dry. The only set of intake gaskets I could find locally are Edelbrock performance gaskets (uh...for an asthmatic 190hp V6? LOL) so we'll see how they do.   #NoToolLeftBehind. It took an hour, but my recovery mission for my deep 10mm socket was successful. It had rolled down the bellhousing and wedged itself between what I think are the fuel lines? I couldn't see it at all, but with a junk antenna I had laying around, I blindly went poking/sweeping for it, heard it clink, raised the truck, and caught a sliver glimpse of chrome with a flashlight way up there in Narnia. I had pushed it farther along the lines holding it captive, but within access of severely improvised tools, poking and cursing at it to finally knock it free to where I could get a fingertip on it to bring it home.    Not much to see.      
    • Thats crazy considering im right next door (Indiana)
    • For a limited time, retail and commercial accounts receive an AMSOIL Vinyl Tool Tray with their order of $500 or more when they use code TRAY726 at checkout. The promotion runs through July 21, 2026.   Order at https://syntheticadvantage.com   Want to use AMSOIL in your business or sell at your store, apply here.  https://www.amsoil.com/business-opportunities/?zo=521390  
    • It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...