Jump to content

Recommended Posts

Posted

Anyone know the biggest tires that can be put on 22" GM rims with a RC 2.5" level while having no rub and no offset?

Posted

I know this has probably been discussed many times on here but I have yet to find a clear answer. I have a '14 crew cab sierra all terrain and I am going to get a 2" leveling kit from rough country. What is the tallest tire I can fit on my truck once I install the leveling kit? I'm looking more for height, I like the width of the stock 275 55 20 tires. I will be installin the tires on the stock all terrain wheels. Any complaints with the RC 2" leveling kit on the newer trucks? I installed one on my '09 sierra when I had it and didn't have any problems.

Posted

I know this has probably been discussed many times on here but I have yet to find a clear answer. I have a '14 crew cab sierra all terrain and I am going to get a 2" leveling kit from rough country. What is the tallest tire I can fit on my truck once I install the leveling kit? I'm looking more for height, I like the width of the stock 275 55 20 tires. I will be installin the tires on the stock all terrain wheels. Any complaints with the RC 2" leveling kit on the newer trucks? I installed one on my '09 sierra when I had it and didn't have any problems.

 

275/60 with 2". I think you can do 275/65 if you do the 2.5".

Posted

I know this has probably been discussed many times on here but I have yet to find a clear answer. I have a '14 crew cab sierra all terrain and I am going to get a 2" leveling kit from rough country. What is the tallest tire I can fit on my truck once I install the leveling kit? I'm looking more for height, I like the width of the stock 275 55 20 tires. I will be installin the tires on the stock all terrain wheels. Any complaints with the RC 2" leveling kit on the newer trucks? I installed one on my '09 sierra when I had it and didn't have any problems.

If you like the stock width, you'd probably be safe to go with 275/60r20s or MAYBE 275/65r20s

Posted

Anyone having ball joint issues with the 2.5" kit? I have the 2" kit and am not happy with it. Going to add the other .5 inches soon and wondering if I will have issues with ball joints?

Posted

Anyone having ball joint issues with the 2.5" kit? I have the 2" kit and am not happy with it. Going to add the other .5 inches soon and wondering if I will have issues with ball joints?

 

You'll be fine at 2.5" i wouldn't go any higher without doing a proper suspension lift.

Posted

Finally finished all the mods, here is some info for those looking for it.

 

- 2inch rough country leveling kit

- 305/55/20 Nitto Terra Grappler G2

- 20 inch Fuel Maverick Wheels with a 20mm Offset

 

And before any one asks, No rubbing on the fender lining and suspension at full lock. I also didn't trim a thing.

 

 

 

 

 

 

Nice looking truck! That's pretty much the exact same set up i'm looking to run. Any chance you could upload some more pics? Maybe one down the side, or from the front showing the stance? Thanks!

Posted

I know I asked before but didn't really get an answer.

 

Can I do Fox coilovers at Factory height and then use a spacer to get my level? I assume fox's would improve ride quality greatly but if they are too compressed they'd be stiff. Using a spacer on them might be the best of both worlds

Posted

2.5" lift, also came with a spacer to do 3" lift in the front. Then I put Firestone airbags in the back to adjust the ride height in the back when I haul/tow. Keep about 10psi in them and it lifted the back around 3/4-1" so I have a little rake in it. Tires to come here soon and maybe rims. Also thinking of doing a 1.5" body lift.

 

Before:

619968bc6a848f423450466b252c7d65.jpge5b3ee9735c914d5a8842a1a5b5bef39.jpg

 

 

After:

4c73105014cb5286d8fbaa63bee928e0.jpg

 

3987340505ee7640338691d2b19703d1.jpg

 

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted

Would you. Happen to have more pics?

18" problems haha I read that 295/70/18 rub with RC 2.5" on stock rims. I love the Z71 rims do i went with the safe bet 275/70/18 Cooper Discoverer. Love em

 

ImageUploadedByTapatalk1422328467.620829.jpg

Posted (edited)

2015 Z71 Silverado 5.3 V8

Bilstein 5100 adjustable strut 2" Level Front
Bilstein 5100 Rear Shocks
Toyo Open Country AT2 275/65/20
MHT Fuel Nutz 20x9 wheels

Magnaflow 18" Dual Exhaust

Zero Rub

 

Couple of pics including a Before and After

post-146254-0-18499200-1439663556_thumb.jpg

post-146254-0-46661400-1439663574_thumb.jpg

post-146254-0-32475800-1439663581_thumb.jpg

post-146254-0-72280700-1439663591_thumb.jpg

post-146254-0-18499200-1439663556_thumb.jpg

post-146254-0-46661400-1439663574_thumb.jpg

post-146254-0-32475800-1439663581_thumb.jpg

post-146254-0-72280700-1439663591_thumb.jpg

post-146254-0-18499200-1439663556_thumb.jpg

post-146254-0-46661400-1439663574_thumb.jpg

post-146254-0-32475800-1439663581_thumb.jpg

post-146254-0-72280700-1439663591_thumb.jpg

post-146254-0-18499200-1439663556_thumb.jpg

post-146254-0-46661400-1439663574_thumb.jpg

post-146254-0-32475800-1439663581_thumb.jpg

post-146254-0-72280700-1439663591_thumb.jpg

Edited by second2none
  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 
    • when it's greyed out that is it's way of telling you that it's downloading the patch in the background. Eventually it will be fully downloaded and then it will prompt you at ignition shut down to run the update. I highly recommend doing the update once you get home and can run it a few times. I've had several issues with updates not going the first time around and I had to retry the update multiple times in my driveway before it was successful.   Some updates are huge and take awhile to download. You can help it by connecting to your home WiFi and keep the truck on service mode for the ignition and keep it alive for awhile on a battery charger too. There are specs it needs to be in for updating such as a full enough battery charge, no running ignition, etc.
    • I am not techy at all but wondered if you have the truck running but sitting still in park as some functions gray out as soon as the truck is moving. I believe in the settings for updates you can choose for it NOT to update and I wonder by chance if maybe that was chosen before and now it won't allow you to chose to press update, I think that is back in the settings menu where it has all the items one wants on or off etc. Also I assume you have a wifi connection and checked that it has some signal strength, not that it would have anything to do with the grayed out updates choice in that case. What I am thinking out loud of here may be be of no value but thought I would suggest it, sometimes it can be the simplest thing that resolves an issue.  
    • The so called rare failure that some certainly liked to tout ( die hard Ford fan boys ) as per the lifter failing and wiping out the cam. Back when it started happening the blame was being pointed to the lifters and honestly I never did hear anything myself conclusively one way or the other on that. Ford themselves in I believe 2024 had a technical bulletin I will call it that came out and for some engine platforms they were reprograming the engines idle speed but also they had a software update for the oil pump which then some time later was said what that software update did as to be increasing the oil pressure at idle. It is a good question if that issue was completely solved as one Ford specialist mechanic youtuber said he saw failures after that time period. Like anything there would be the variables, what oil is being used and the OCI and how much idle time gets put on an engine. I've seen some comments to claim that the L8T isn't so happy with high idle time either but I also know that companies that require their vehicle to idle a lot on the job don't tend to get the oil changed often enough for all those hours of idle time and go off of the odometer. 
    • My 2026 Silv. 1500 WT (reg cab/short bed/4wd) has the 40/20/40 with storage in lower middle seat as well as the fold-down center bolster/armrest.   With the dual glove boxes this is about as much storage as possible in a std cab IMHO. Bill
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...