Jump to content

Recommended Posts

Posted

What wheel size do you have? I have the same size 2.25" level in front and 3" blocks out back on my 17. I'm running 295/55R20 Nitto Ridge Grapplers on Sierra reps that have the factory offset. Minor rubbing on the plastics at full lock. I could probably zip tie them back and clear them but I'm lazy. f68d498d4c0768ca9ad6430dd085df34.jpg

 

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

 

Sent from my iPad using Tapatalk

Posted

Currently running the factory 275/55R20 so 20". Nice Truck.

 

 

Sent from my iPad using Tapatalk

Thanks

 

Sent from my SAMSUNG-SM-G920A using Tapatalk

Posted

Hmmm .. they fit with just a 2" lift in the front ?? They are pretty slick !! I just googled and found this. 7b7718c59b9ddaf24608cbde8fa9f13a.jpg

 

 

Sent from my iPhone using Tapatalk

That's a 4.5 inch Zone

 

 

Sent from my iPhone using Tapatalk

Posted

So how do you reduce the dice of a picture to be able to post on this site.

#cantfigureitout

Use the tapatalk app. for the forum. It will resize for you.

 

Sent from my SAMSUNG-SM-G920A using Tapatalk

Posted

Use the tapatalk app. for the forum. It will resize for you.

 

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

 

Sent from my iPad using Tapatalk

Thank you sir

 

 

Sent from my iPad using Tapatalk

Posted

So how do you reduce the dice of a picture to be able to post on this site.

#cantfigureitout

 

 

Sent from my iPad using Tapatalk

Posted (edited)

Sent from my iPad using Tapatalk

Thank you sir

 

 

Sent from my iPad using Tapatalk

 

Sent from my iPad using Tapatalkpost-175204-150436992568_thumb.pngf4477778dd0560ddc72575ac5e83a878.jpg

post-175204-150436992568_thumb.png

post-175204-150436992568_thumb.png

post-175204-150436992568_thumb.png

Edited by cowboysfanmd
Posted

1ad590790f29c6d60090597f76fb3a84.jpg

 

88e6d5d09aa371ed0ac42bb08654c2f2.jpg

 

c4f8604e1f4931985c996854e819375e.jpg

 

facf435d0f9a84a16509742e9f701c0b.jpg

 

a86fca72cad034ac38d2e9ed3b76f745.jpg

 

Glad to have it back and it's beautiful!!!

 

2016 Silverado

2.5" Rough Country Lift

Moto Metal MO970 20x9 +0 Offset

Toyo Open Country RT 295 55/20

 

 

Sent from my iPhone using Tapatalk

  • Like 3
Posted

1ad590790f29c6d60090597f76fb3a84.jpg

 

88e6d5d09aa371ed0ac42bb08654c2f2.jpg

 

c4f8604e1f4931985c996854e819375e.jpg

 

facf435d0f9a84a16509742e9f701c0b.jpg

 

a86fca72cad034ac38d2e9ed3b76f745.jpg

 

Glad to have it back and it's beautiful!!!

 

2016 Silverado

2.5" Rough Country Lift

Moto Metal MO970 20x9 +0 Offset

Toyo Open Country RT 295 55/20

 

 

Sent from my iPhone using Tapatalk

 

 

Sent from my iPad using Tapatalk

Posted

Looks awesome, trying to decide on the tires, hope to make a decision before weekend ends. The YOYOs look great. I think its now between the TOYOs and Terra Grapplers.

 

 

Sent from my iPad using Tapatalk

  • Like 1
Posted (edited)

I did the MotoFab 2" level kit up front on my '17 Sierra 1500, and I have had it in for just over a week. I'm getting some slight wheel rub on the left when at left turn lock. After reading through I'm thinking this shouldn't be. The guys at my local alignment shop had a helluva time getting it aligned. Took two trips before the camber and toe was right, and upon getting camber/toe dialed in my cross caster is out one degree to the right side. -0.4° left and +1.4° right. Any advice to be had? This is an Elevation Edition sitting on the factory 20"s with the factory 275 55 20 Conti's

 

Edit: I guess -0.4 and 1.4 is really 1.8 huh...

Edited by nmyron

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.
    • There's absolutely a mountain of profit in catering to the "I do my own research" crowd, people who are certain they know better. And I don't mean there isn't data to support that 0w40 produces less wear product than 0w20 in an engine like the 3.0 Duramax, that only feeds them the assurance they need. Again, my whole thing with oil selection is, sure, 0w40 or 0w30 produces less wear product. Are we talking the difference between the engine lasting only 100k versus 200k? Or are we talking more like, if the engine will already go 350k on a good 0w20 regimen recommended by the OE, is using 0w40 going to get us to 355k, assuming we can even get the rest of the truck to last that long, meanwhile sacrificing the first 5y, 100k in powertrain warranty. The answer isn't easy, there are tradeoffs.   I willfully use 0w20 Dexos D for this reason, knowing that a 0w40 will produce slightly less wear. I don't believe the delta in wear product is meaningful over the lifetime of the engine, and I place much more importance on driving style and overall feeding and care of the engine as a whole. It's the mentality that someone can abstain from alcohol their whole life which is an amazing boost to health by itself, theoretically. But if they're sedentary, that lifestyle choice will most likely kill them young despite their other, concerted efforts. Maybe someone doesn't drink AND they are the perfect picture of health and activity AND they use 0w40 AND they treat their engine perfectly. If living until 130 years is the goal, sure, do that. But it's going to be a really old truck falling apart around a good engine for that last 30 years, without a doubt.   I watched Demonworks' other video on the 100k+ 3.0 Duramax that had dealer 0w20 changes on what appears to be OLM-prescribed intervals (8-10k).   The QR codes are still present and readable on the main bearings. That's how little wear it has.   That's not proof that anyone else should stick to 0w20, but it's confirmation, for me, that 0w20 is perfectly acceptable to use in these engines.
    • 1Based on independent testing of OE 0W-20 in the Peugeot TU3M Wear Test as required by the dexos1 Gen 2 specification.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...