Jump to content

Recommended Posts

Posted
On 1/26/2018 at 4:51 PM, DenaliLegend said:

Thanks! 285/55r22 and get a small rub on full lock on liner only

Damn, wouldn't think they'd fit without harsh rubbing on a leveling kit 

Posted

Here's a pic of my leveled 2018...

 

3" leveling kit on 275/60/20, removed factory block in the rear. 

IMG_2230.JPG

Posted

What’s up guys I went with a motofab leveling kit 3inches in the front 2 in the back did it myself but fursure a lot easier with two people 44a68958d320f1ad6b1deb02890ddf3d.jpg


Sent from my iPhone using Tapatalk

Posted

2018 crewcab Silverado 2” RC leveling kit. Thinking about 295/55/20 Nitto Ridge Grappler on stock wheels, anyone running these tires with this setup?

 

b77de85056fbbb017203c4338c7b27ce.jpg

 

 

Sent from my iPhone using Tapatalk

 

 

Posted
2018 crewcab Silverado 2” RC leveling kit. Thinking about 295/55/20 Nitto Ridge Grappler on stock wheels, anyone running these tires with this setup?

 

b77de85056fbbb017203c4338c7b27ce.jpg

 

 

Sent from my iPhone using Tapatalk

 

 

Any wider than a 275 on your stock wheels will rub the UCAs on your 18 with a leveling kit. If you look you likey are already rubbing slightly on your UCAs now on stockers. 295s will fit in that 295/55R20 height-wise but width will give you trouble.

 

 

 

 

Sent from my iPhone using Tapatalk

Posted
Any wider than a 275 on your stock wheels will rub the UCAs on your 18 with a leveling kit. If you look you likey are already rubbing slightly on your UCAs now on stockers. 295s will fit in that 295/55R20 height-wise but width will give you trouble.
 
 
 
 
Sent from my iPhone using Tapatalk

Sounds like maybe going to a 275/65 or 60 might be a better fit.


Sent from my iPhone using Tapatalk
  • Like 1
Posted
On 1/10/2018 at 7:16 PM, SirenRed16 said:

If you remove the rear block that'll only give you like 1 inch. If you want perfect level you have to buy lowering shackles. Both of these trucks have a 3 inch drop in the rear.a45530fbd42120b73c4d94ccaa369295.jpg550829c858b445602deffab5fe6f9d5b.jpg

Sent from my SAMSUNG-SM-N920A using Tapatalk
 

Is this 2" shackles and block taken out? 

Posted
Is this 2" shackles and block taken out? 
No it's a 2" shackles and the block flipped under the leaf springs. If I had removed the block I would of had to get longer u bolts.

Sent from my SAMSUNG-SM-N920A using Tapatalk

  • Like 1
Posted (edited)
3 minutes ago, SirenRed16 said:

No it's a 2" shackles and the block flipped under the leaf springs. If I had removed the block I would of had to get longer u bolts.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 

any pictures of the block being flipped? I'm really new to this truck thing and I like how those trucks sit with the rear drop. I've seen 2" shackles with .5" block, is that about the same?

Edited by silvy2k17
Posted
any pictures of the block being flipped? I'm really new to this truck thing and I like how those trucks sit with the rear drop. I've seen 2" shackles with .5" block, is that about the same?
It'll be the same but the trucks I posted have about 3" of drop. I'll try and get you a picture.

Sent from my SAMSUNG-SM-N920A using Tapatalk

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Took me FIFTEEN MINUTES to find this. Isn't that a problem? On the mainstream media I can INSTANTLY find 100 articles bashing President Trump ... but when it comes to TRUTH in American corporate news & search engines, it's carefully filtered to support ONE SIDE. A Republic cannot survive like this! Incredible! Even all the AI searchers out there failed as well! ChatGPT said it needed more details on the video that I provided a DIRECT LINK to! I thought AI was the be-all, end-all?? I had to dig it up myself. This should be FRONT PAGE NEWS!!! 🤬   Here's the statement directly from our President:     Glenn Beck's reporting on the operation:   https://glennbeck.com/watch/videos/trump-just-revealed-a-massive-military-secret-that-lowered-gas-prices   In case that link doesn't work, here's the YouTube link:    
    • More is cylinder deactivation. Kia-Hyundai Ive had 4. The warranty is the same 10 years 100K miles. My grandson drives the first one 05 Elantra GT. My wife drives the second one 2011 Genesis. The Genesis still performs as new and looks great. The Elantra looks rough. He’s not kind to it. The third was a Genesis coup. The fourth was a Santa Fe. Those were my daily drivers. I don’t keep them long. Kia is the same as Hyundai with the same warranty. I looked at the K-4 today. Too small, otherwise pretty good buy. Most of Hyundai and Kia’s have a performance upgrade. 
    • Thanks for the point of reference 
    • Great question. Answer....depends. One the volume of the crankcase, the driver that will actually be using the vehicle and the amount it uses plus the distance expected for that next trip. Couple of for instances:   Wife is going to drive Dizzy to Moline and back plus a bit around town so say 500 miles on the day. I know from years with that SUV that around town and local rural it uses about a quart in 1250 miles. But on the Interstate and her at the wheel without her anchor nagging her she'll push it and it will drop a quart in about 800 miles. Hence, around town I wait to somewhere between a quarter down to a quart down. On her trip I'd top it if it was down a few ounces and hope for the best.    Have I overfilled one? You mean by adding before it needs a full quart I assume. No, not once after finding the true fill mark.  I know the dipsticks of everything I drive and add what it needs. I learn this by doing the first oil change a quart low. Run the motor for a few minutes. Let it sit over night. Check and mark. Then add half a cup at a time making note of the place on the stick. I add through the dipstick tube with a barbeque basting bottle. Give it a few minutes to drain down and check again.    A vehicle like Dizzy that uses this much oil will take a few quarts between 3K changes. I keep one in the vehicle with the bottle and a bag. (Mindful of it's fullness) Not a big deal and never makes a mess of it. There is no such thing as "multiple quarts' in my shop for any specific oil. There will be a maximum however of the number of different oils used over the fleet.     Dizzy holds a nominal 5 quarts. So the first fill was indeed over as it actually took 4.75. My vehicles are fit with Valvomax valves so I can meter an ounce on the drain if need be. Found her mark first crack at it. Never to be repeated.    Pepper uses none between changes so I don't keep a quart in that one. Straight up 6 quarts put her dead on the full line. Check it ever fuel stop. They will surprise you when they start using.    Raven holds 3 liters or 5.44 ounces over three quarts. I add 3 quarts and 6 ounces. That gives me 5 oil changes on my orphan quart.    Lawnmower holds about 3/5 of a quart. I don't over fill it to prevent an orphan. So yea, depends. 
    • 185k on original 6.2L engine and 10 speed. 6" lift with 35" tires. Changed oil (Mobil 1 synthetic) when truck told me to. Original tranny with original fluid and no service or flush done. All highway miles. A/C compressor replaced at 155k. Oil cooler line replaced at 180k. Still daily driver. Love this truck.   This is my 3rd 6.2L vehicle (2008 Yukon Denali / 2018 Cadillac Escalade) with over 150k miles and no issues. Denali had broken motor mount at 100k.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...