Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
I have a 2017 and have the ProComp 2.25" level. I ran it with the stock UCAs for about 20k miles without any issues. I got my 2017 in August of 2016 and none of the levels were offering replacement UCAs. I added cognito UCAs because I got them used for a good price. I'm not saying you wont have any issues but I'm not easy on my truck and the ball joints were fine when I took the stock UCAs out.

The ProComp kit is just a level and doesn't include a diff drop. It is the exact same kit as the Readylift 2.25" level just in a different box and costs less. Now Readylift is offering replacement UCAs with the kit. 7fdd87731ce40372b9d3b6d7ad7fbf8b.jpg

Sent from my SM-G950U using Tapatalk


I’ve got about 6k on my level, ordered Fox coilovers with resi’s, new Fabtech UCA’s and after lots of research, I cancelled my order and went with the 4.5” lift through CST Suspension. There are a few guys on the forum that got me turned on by it due to zero widening of the front wheel track unlike all the other brands and after many thousands of miles not one complaint. Leveling is fine for a clearing a bit larger tires but I noticed immediately after leveling with no larger tires that my truck rode rougher. This lift will put everything back but lift through spindles.


Sent from above
  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

ShubiSnax Enthusiast

ShubiSnax

Posted
Posted
9 hours ago, rudyb said:

I dig it. Any rub with this setup? Are you running stock UCA? Is that a 1.5" level? Thanks

Thanks! Bilstein 5100's(front on 3rd setting, rear is stock height). Stock UCA's. Bilstein claims this is a 1.25" lift in the front, but I have a feeling it was just a bit more.

I did get some rubbing on the factory mudflaps so I took a dremel and trimmed the insides just a bit. No rubbing now.

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
Just 2” and 285s stock wheels. Nothing drastic

 

 

Sent from my iPhone using Tapatalk

 

The interesting thing about people raving about leveling is they forget to mention from mid 2015 GM started using stamped steel UCA’s, causing your tires to rub onto your trucks frame and or UCA’s. Not trying to be negative about leveling but Doing a level, it caused me to spend thousands of dollars replacing stock wheels with new +1 offset and finally larger tires (no rubbing) at a cost of approximately $3K later. At least I’m half way done on what it costs to lift a truck lol!

 

This is only experienced with my 20” wheels and tires.

 

Also forgot to mention you’ll need new shocks too for the raised height preferably Bilstein 5100’s

 

Sent from above

 

Rad_Rado17 Enthusiast

Rad_Rado17

Posted
Posted
1 hour ago, TXGREEK said:


I’ve got about 6k on my level, ordered Fox coilovers with resi’s, new Fabtech UCA’s and after lots of research, I cancelled my order and went with the 4.5” lift through CST Suspension. There are a few guys on the forum that got me turned on by it due to zero widening of the front wheel track unlike all the other brands and after many thousands of miles not one complaint. Leveling is fine for a clearing a bit larger tires but I noticed immediately after leveling with no larger tires that my truck rode rougher. This lift will put everything back but lift through spindles.


Sent from above

I am in the same boat, I am currently looking into control arms or possibly doing the same CST lift too.  I don't want the headache down the road....

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted
I am in the same boat, I am currently looking into control arms or possibly doing the same CST lift too.  I don't want the headache down the road....


Not worth the headaches, believe me. So much BS going on these forums with lies how some aren’t getting any rubbing with exact setup only to admit it soon after as “its not bad” lmao! Just spoke with the shop, haven’t received it yet from CST. I’m looking at first part of next week for install, arg!


Sent from above
ducklawyer Enthusiast

ducklawyer

Posted
Posted
 The interesting thing about people raving about leveling is they forget to mention from mid 2015 GM started using stamped steel UCA’s, causing your tires to rub onto your trucks frame and or UCA’s. Not trying to be negative about leveling but Doing a level, it caused me to spend thousands of dollars replacing stock wheels with new +1 offset and finally larger tires (no rubbing) at a cost of approximately $3K later. At least I’m half way done on what it costs to lift a truck lol!
 
This is only experienced with my 20” wheels and tires.
 
Also forgot to mention you’ll need new shocks too for the raised height preferably Bilstein 5100’s
 
Sent from above
 

Can’t imagine I’ll rub with the 285s. 32.5x11.5 should clear with 2”. I’ll report this afternoon. As far as the shocks go I’ll let it ride. Had same setup on my 14 (with 285/55 ko2s) and never thought it rode bad.
69705009de4abb2fe3659c98c2ac3629.jpg


Sent from my iPhone using Tapatalk
Sierra706 Senior Enthusiast

Sierra706

Posted
Posted
 
Running a procomp lift will included diff drop which doesn’t need new UCA’s cause with a diff drop your UCA’s will be fine for a while.
 
You should look at CST suspension, much better quality and doesn’t make your track widen up front like it does with all those knuckle replacement kits such as BDS, ProComp. A couple guy on this forum brought it up and I jumped on it.
 
 
Sent from above


A diff drop and UCAs are not related. Diff drop will help your CV joints return to a more stock angle. It will do nothing in regards to the upper ball joint which is the weak point of the stamped steel arms.


Sent from my iPhone using Tapatalk
  • Like 1
Rad_Rado17 Enthusiast

Rad_Rado17

Posted
Posted
22 minutes ago, TXGREEK said:

 


Not worth the headaches, believe me. So much BS going on these forums with lies how some aren’t getting any rubbing with exact setup only to admit it soon after as “its not bad” lmao! Just spoke with the shop, haven’t received it yet from CST. I’m looking at first part of next week for install, arg!


Sent from above

 

I hear ya..........I currently have a 3" level and am looking at control arms + a diff drop.  

 

can't wait to see pics once it's done.

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted


A diff drop and UCAs are not related. Diff drop will help your CV joints return to a more stock angle. It will do nothing in regards to the upper ball joint which is the weak point of the stamped steel arms.


Sent from my iPhone using Tapatalk


Speaking of my experience, after my 2.25” level was installed, the installer showed me that my UCA’s were not flat anymore, arched. Levels kill UCA’s!


Sent from above
pronstar Enthusiast

pronstar

Posted
Posted
 

Not trying to be negative about leveling but Doing a level, it caused me to spend thousands of dollars replacing stock wheels with new +1 offset and finally larger tires (no rubbing) at a cost of approximately $3K later. At least I’m half way done on what it costs to lift a truck lol!
 


It depends on the components selected.

It’s entirely possible to level a truck with new UCA’s, on stock wheels with larger tires, and get great ride quality.
  • Like 1
pronstar Enthusiast

pronstar

Posted
Posted

Can’t imagine I’ll rub with the 285s. 32.5x11.5 should clear with 2”. I’ll report this afternoon. As far as the shocks go I’ll let it ride. Had same setup on my 14 (with 285/55 ko2s) and never thought it rode bad.
69705009de4abb2fe3659c98c2ac3629.jpg


Sent from my iPhone using Tapatalk



You might get slight rub with 285’s depending on tire choice.

I get very slight rubbing at full lock with my 285
Nitto Trail Grappler MT’s on stock wheels.


Sent from my iPhone using Tapatalk Pro
TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted

Right after I did my level I installed 275/60/20 KO2’s and they rubbed bad! Went to a Fuel+18 and still rubbed but not as bad, Only thing that worked is current setup +1 offset 20X9’s with Nitto Ridge Grapplers 285/60/20’s


Sent from above

TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted


It depends on the components selected.

It’s entirely possible to level a truck with new UCA’s, on stock wheels with larger tires, and get great ride quality.


Absolutely correct, the UCA’s play a big role in it.


Sent from above
TXGREEK Senior Enthusiast

TXGREEK

Posted
Posted

 

 

You might get slight rub with 285’s depending on tire choice.

 

I get very slight rubbing at full lock with my 285

Nitto Trail Grappler MT’s on stock wheels.

 

 

Sent from my iPhone using Tapatalk Pro

My 275/60/20’s on stock 20’s rubbed bad and embarrassing especially in grocery store parking lots.

Leveling over 2.25” is a money pit.

 

Sent from above

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      Well if you insist.
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      You have to have the last word. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I am sure that was quite the pass experience and not a great place to experience during the winter when the conditions are not good. I've seen video of that pass and also more detailed information and pictures about the wrecks at that one hair pin turn where tractor trailers have flown right off the cliff and I am sure from all the warning signs that you know the exact curve that was !. After all there is a reason why a song was made about Wolf Creek Pass !. By the way and I didn't realize this either when I bought my truck as its nothing I even thought of that would be programmed into the cruise control and this occurs in either the basic or the more advanced cruise that controls your distance behind a vehicle and that is the brakes going down a hill are being applied as soon as the vehicle goes a certain speed over the set cruise speed. While it certainly does force downshifts in the transmission as you found out with cruise on while going down hill, its also dragging the brakes as needed to keep the speed controlled to what the cruise was set to. For me, I find that unsettling simply because I have no concept then as to how MUCH brake input is being used a and just how hot are those brakes getting and the wear factor as well. I can see that system getting a person into trouble on long mountain grades while pulling a trailer as it would not only be standing on the brakes of the pickup without any driver input, it would also be automatically applying the trailer brakes and it could cause a run away unit by overheating the brakes. Its one thing on a shorter hill and if the driver allows it to do its thing but on a long mountain grade is where things could get so out of hand. As someone a while back on this forum said, they had someone following them at night I believe on a down grade and had the cruise set and the person behind them could see the brake lights being energized all the way down the hill. I figured when I saw your comment that you didn't know and would have no way of knowing that your truck was applying the brakes and that you would and rightfully so assume you only used the brakes when you pressed on the pedal to slow down more than the cruise set speed for the slower sharp curves. So its good knowledge to know this about the newer GM trucks, certainly when doing any descending on long mountain grades. In the future try kicking off the cruise and use the the manual mode on a pass to see what that is like as I know myself when I first experienced it I thought no way can this engine be holding me back this well and tried the same hill in manual mode and sure enough the engine was revving way up and still could not hold the trucks speed down like it could in cruise mode.    Fuel mileage, that is where a really low sleek type of car can do better at higher speeds, certainly it starts sucking fuel too but a tall pickup is pushing massive amounts of air and also allowing a lot more air under it and the tow mirrors as in elephant ears pushing through the wind  as well. Driving like grandpa is about as good as one can do when driving one of these if trying to get the best fuel economy they can. I bet these trucks would get the best mileage they can if driven on a freeway in Florida if not busy traffic at a sedate speed and that sea level elevation without hills, vastly different then Colorado !. 
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      It’s over for almost 24 hours. Are you playing Eddie Haskell? 
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      Again, really you two.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...