Jump to content

Recommended Posts

Posted

I guess this counts as something I did to my K2 today...

 

I just negotiated a deal on a 2016 crew cab LTZ midnight edition. I will be trading in my 2015 crew cab summit white 2lz.

 

The 2016 is currently in transit and should be at the dealer by the end of the month! Pics to follow...

  • Like 1
Posted

I guess this counts as something I did to my K2 today...

 

I just negotiated a deal on a 2016 crew cab LTZ midnight edition. I will be trading in my 2015 crew cab summit white 2lz.

 

The 2016 is currently in transit and should be at the dealer by the end of the month! Pics to follow...

Good choice! The midnight editions are some of the best looking factory produced trucks.

 

Sent from my SM-G900P using Tapatalk

Posted (edited)

De-badged my 15 SLT. I'm so happy with the results. Used 50lb braid, which made it a breeze to 'cut' them away. I used my fingers to pull the remaining 3M off. I then used 3M adhesive remover (this stuff is worth your time and money) to clean up the residual. Once all of that was cleaned up, I washed the affected areas and waxed away the fine lines that remained. Looks like they were never there.

 

 

Sent from my iPhone using Tapatalk1f479c6a0068f3f127481bca4f6d71f5.jpg51449dd78bb50a2d1ddf3fe079a78372.jpg1d1f4e856f0e950323b43c83c8b593cb.jpg3c68ba38aad8d93e2a2466c9f5cac473.jpg

Edited by J-Honcho
  • Like 2
Posted

how do you like them? How did the install go??

 

Install was pretty much straight forward but that was after I didn't receive all of the brackets with my order.... Box came looking like it had been opened and returned. I ordered from SDTRUCKSPRINGS.

iPhone 6 '14 Silverado

Posted

I had the i1000 tuner but it kept giving me issues, wondering if the i2 would give me less issues? Let us know how you like it!

So far I like it a lot. I had issues with connecting to laptop for first time for updates but I swapped cords and all is good.

Posted (edited)

Added LED's to the bumper step.

 

 

Told you your post was going to motivate me :)

steplight3_zpsn4nkdkfm.jpg

I installed some 10mm threaded bayonet jobs.

I placed them on the back plate vs the top of the step since I wanted it to shoot some light off to the sides as well as hit the edge of the step.

(We load equipment in the dark after gigs and am in the habit of setting stuff off to the side as I organize the bed, this way anything I put out there will be lit.)

steplight1_zpsiwueresb.jpg

No need to remove the bumper, but place something between the bumper and bed as you drill as the bit may catch on the soft plastic and pull in quickly.

The barrel light just screws in and after placing the backing nut you can tighten with appropriate open ended wrench.

Dabs of silicone applied with a stick will keep the nut from backing out.

steplight2_zpselj4rckx.jpg

 

Lights are wired to work off the cargo switch along with bed lights.

ebay link http://www.ebay.com/itm/2pcs-1-5W-T8-LED-12V-Hidden-Car-Eagle-Eye-10mm-Screw-Bolt-on-Light-Bulb-White-/141720785400?hash=item20ff3791f8:g:gSIAAOSwT6pVqIRU&vxp=mtr

Edited by crewl1
  • Like 1
Posted

At last i almost had to call on my neighbor to download it he's 8

Nice stickers go bolts

 

sent from Florida beech

Posted

Cleaned the interior since I've neglected it since about mid November, now I realize I shouldn't have done that cause it took 2.5 hours to get it perfect. Got a lot of stuff planned for this weekend, hopefully I can finish it all up and post it up!

  • Like 1
Posted

so far .. i have added a grill guard ..and updated the tires to 20's

 

post-145295-0-20186800-1455766513_thumb.jpg

post-145295-0-96791200-1455766247_thumb.jpeg

post-145295-0-96791200-1455766247_thumb.jpeg

post-145295-0-20186800-1455766513_thumb.jpg

post-145295-0-96791200-1455766247_thumb.jpeg

post-145295-0-20186800-1455766513_thumb.jpg

post-145295-0-96791200-1455766247_thumb.jpeg

post-145295-0-20186800-1455766513_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.
    • I can't believe that could possibly be the case. It should be 36mo/100k miles from installation. Then again, it also seems like since a dealership installed it, it'd all be in the system and you wouldn't need to worry about registering, either. Shows you what I know. 😄 Hope this one outlives the warranty!
    • I haven't seen inventory recovery from COVID.    In the few random times I 'build my own' truck or SUV, no one has the exact one I want.   GM has been working to lower incentives too for a long time.    A $500 incentive isn't getting me off the couch to go truck shopping.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...