Jump to content

Recommended Posts

Posted

Started laying out my el wiring today.. need some help with the tie breaker vote.. red or blue?

large.20180828_172011.jpg.75a42bf5aad5ea77c2394a3144c7ee97.jpglarge.20180828_172049.jpg.b165d9fc623e57cfcf544f95e5a52234.jpglarge.20180828_201820.jpg.c19344f8c4b891d6ebc308e5d1a574f1.jpglarge.20180828_201744.jpg.758539ad74a37a642e38926bb92e580b.jpg

The el wire is temporarily setup.. the finished setup will end at the armrest like the daytime photos and not extend down along the switch panel. The problem I have is red or blue.. daytime the red pops more on the door panel but night time the blue matches the oem dash light

  • Like 1
Posted
19 minutes ago, YukonXL04 said:

I say blue. And I also say that looks badass! Where did you get it?

eBay.. these were left over from another project but you can do all 4 doors for around $10 or so.. there are a ton of options on there for el wire

 

Posted
eBay.. these were left over from another project but you can do all 4 doors for around $10 or so.. there are a ton of options on there for el wire
 
I vote blue. Do you have a link for the one you bought? And how are you making it stay?

Sent from my SM-G955U using Tapatalk

Posted
5 minutes ago, CKrado said:

I vote blue. Do you have a link for the one you bought? And how are you making it stay?

Sent from my SM-G955U using Tapatalk
 

If you get the style of el wire that is like welting then you can simply push it into the cracks in your trim/upholstery. I did a quick eBay search and this is the kind to look for:

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.ca%2Fulk%2Fitm%2F172860512467

 

 

Posted

another vote for blue! 

 

That said, don't you guys find having lights on at night when driving distracting?? Perhaps if you turn it way way down. Wife has used a reading light in the past, bugged me lol

Posted
47 minutes ago, Roscopcoletrain said:

another vote for blue! 

 

That said, don't you guys find having lights on at night when driving distracting?? Perhaps if you turn it way way down. Wife has used a reading light in the past, bugged me lol

I find that overhead lights or white light bugs me but the dash colors and such don't. I don't know if its more the color or position but doesn't seem to be an issue with other lights.

  • Like 1
Posted
Started laying out my el wiring today.. need some help with the tie breaker vote.. red or blue?
large.20180828_172011.jpg.75a42bf5aad5ea77c2394a3144c7ee97.jpglarge.20180828_172049.jpg.b165d9fc623e57cfcf544f95e5a52234.jpglarge.20180828_201820.jpg.c19344f8c4b891d6ebc308e5d1a574f1.jpglarge.20180828_201744.jpg.758539ad74a37a642e38926bb92e580b.jpg
The el wire is temporarily setup.. the finished setup will end at the armrest like the daytime photos and not extend down along the switch panel. The problem I have is red or blue.. daytime the red pops more on the door panel but night time the blue matches the oem dash light

Are these dimmable?


Sent from my iPhone using Tapatalk
Posted
7 minutes ago, stassin22 said:


Are these dimmable?


Sent from my iPhone using Tapatalk

you can dim el wire.. typically it's done via pwm (think single bulb daytime running lights on cars).. although there are other diy methods that have been used. You can also buy ready to use dimmable el drivers. el wire is like led's in that there is a wide spectrum of quality, brightness and applications available out there.

Posted
you can dim el wire.. typically it's done via pwm (think single bulb daytime running lights on cars).. although there are other diy methods that have been used. You can also buy ready to use dimmable el drivers. el wire is like led's in that there is a wide spectrum of quality, brightness and applications available out there.

Well thanks for adding to my list of future mods and finances lol


Sent from my iPhone using Tapatalk
  • Haha 1
Posted
you can dim el wire.. typically it's done via pwm (think single bulb daytime running lights on cars).. although there are other diy methods that have been used. You can also buy ready to use dimmable el drivers. el wire is like led's in that there is a wide spectrum of quality, brightness and applications available out there.


I wore el lights for a Halloween costume one year, did you hard wire yours or just the battery pack?


Sent from my iPhone using Tapatalk
Posted
19 minutes ago, Deadpoollane said:

 


I wore el lights for a Halloween costume one year, did you hard wire yours or just the battery pack?


Sent from my iPhone using Tapatalk

 

I hardwire everything.. but ya you can run el lighting from a battery pack with a some AA batteries to create "wearables"

If you think the ambient lighting may be too distracting check out Google and have a look at the OEM lighting options in the new Camaro's and Mercedes-Benz E class cars.. it's not for everyone but the Automobile industry acknowledges the custom car crowd

Posted
I hardwire everything.. but ya you can run el lighting from a battery pack with a some AA batteries to create "wearables"
If you think the ambient lighting may be too distracting check out Google and have a look at the OEM lighting options in the new Camaro's and Mercedes-Benz E class cars.. it's not for everyone but the Automobile industry acknowledges the custom car crowd


Yep, my 2010 camaro has the same look you made


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Wawa and Meijer here have ethanol free (88 & 89) I use for my mower and lawn equipment.  Its not much more than reg.  I paid $3.29 a few weeks ago.  
    • tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
    • NewDude, thank you for the suggestions!    I did follow up and the dealer indicates he has an open CX case and is working with DPAC (Dealer Parts Assistance Center).   Per the dealer, GM has had a quality spill and is not providing an update for when a replacement engine will be available.
    • That's interesting.   There was a factory wire-hole in the back, top of the rear cab, which had a wire for the third brakelight assembly running through it, as well as several holes (10 of them I believe) for all of the studs coming off of the 3rd brakelight assembly itself.   I sealed all of those holes with RTV/silicone as well.   I found it kind of odd, that none of those holes, were sealed with any kind of sealant by the factory - if there was any there, it wasn't very much.   That said, I've been out in heavy rain and have ran the truck through high-pressure car-washes a few times now and she has been 100% water-tight to this point.   I feel very confident in the repair, we'll see how it holds up.
    • I bought a used 2022 2500hd with 6.6L in February. In March took a 2200 mile trip towing our 6500 lb trailer. Changed the oil day before leaving and when we were arriving at our 1st destination, low oil light came on (roughly 1000 miles) it was 2 qts low. Now it towed like a dream, no issue there, and we did go through the mountains of TN, but still, 2 qts! Luckily I did purchase an extended warranty. Brought it to the dealership in April, oil change and consumption test. Brought it back last week, 1300 miles, no towing, and no oil showing on the dipstick. GM is reccomending a new engine (cheaper than them rebuilding), we'll see if the warranty company comes through. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...