Jump to content

Recommended Posts

Posted

I think a lot of complaints about the wipers are actually due to a contaminated windshield. I've found an excellent product for deep cleaning the glass (cleans the rubber on the wipers too). It's Bon Ami cleanser. You'd think it would scratch the glass but it doesn't. GM actually used to recommend it.

 

Wet down the glass and sprinkle the Bon Ami pretty heavily and then scrub with a cloth. You'll feel the cleanser digging in. When you rinse it off you can see how the glass is sheeting off the water. If it doesn't sheet off it means you need to scrub some more. Then take the same cloth and scrub the rubber of the wipers. It's almost a miracle how well this works. The windshield and wipers are clean like new and work nice and smooth.

 

Here is a picture of what to buy. Get the 1886 formula. I found mine at a mom & pop hardware store. Definitely don't use any other kind of abrasive cleanser - only Bon Ami.

 

WP_20160813_004_zpsrqrcbxs4.jpg

  • Like 1
Posted (edited)

too many to quote - but x 6 or 7 or 8 or whatever on rain-x. i've used it on headlights , side view mirrors and everything - really helps shed water and in not so nice months slush snow and crap off , coupled with my OEM blades i have zero issues. apply it twice a year once in spring once in fall. best 6.99 you can spend IMO. i will note my truck also sits in my garage when not in use so its not subject to elements deteriorating them as mentioned earlier too.

Edited by AdamZ71
Posted

Before you buy anything, always look at amazon. It saves me a lot of money every year.

 

Advance Auto isn't too bad if you order online and pickup in store. If you Google it you can usually find a coupon for 30% off when you order online.

Posted

I agree with Dale_K on cleaning the glass. I have not tried Bon Ami but I use Rain-X X-treme Glass cleaner a few times a year. I got it at Walmart and it does a great job getting off all the old grime and film.

 

419ksUATwGL.jpg

Posted

Check out the Goodyear Hybrid blades at Costco for $7.99 each. I've installed them on my sons' and daughters' vehicles recently and they fit and work well (obviously better than stock). For you Costco Special Owners, this is a particularly good fit.

Two times a year Costco offers a buy one get one free on these blades....time to stockpile....Goodyear instructions and numerous Mickey Mouse mounting adapters can be confusing and look like they'll fly off with the first swipe.......BUT they hold firmly and wipe better than the OEM....great blades.

  • 1 year later...
Posted

I got my 2018 a month ago and have gone just under 1000 miles now at least half in the rain.   The original wipers left streaks and shuttered so I did research and decided to get the Michelin Stealth wipers for their snow and ice performance in addition to rain.  Living in Michigan we get a little of everything.   I drove for the first time with the new blades today and they are so much better, no streaks, no shuttering, stupid quiet, and I think they look nicer too.  The original blades were sticky feeling and almost looked like a half circle after taking them off.  For 30 bucks this was one of the best mods yet.  Hopefully they hold up and do as well with snow and ice as with rain.

  • 1 year later...
Posted

Here's one out of the box for ya.  Take a clean old bed linen sheet (white is preferable) and makes a small rag.  Spray some lacquer thinner onto the sheet rag.  Run the lightly soaked cloth along the square edge of the wiper blade.  You'll see a coating of black (rubber) removed from the blade onto the rag.  This works best if you remove the wiper blade and work under a nice bright shop light or outside in the sun.   Lacquer thinner evaporates very quickly so work fast.  Do not scrub.  Run the whole length of the blade nor more than twice.  Wear a nitrile glove or something.  Giggle if you will but I'm still running my 2015 OEM's on my 2500HD in Maine with all the salt, sand, and other road crap.  Want to see the results of your work?  Take a very strong lens (old camcorder or camera) and look at the wiper cleaning edge before and after.  It makes a nice crisp edge.  It typically is very small chunks of pitch (pine trees in Maine) the collect on the cleaning edges of the rubber that make the streaks.  The rubber needs to be in good condition for this to work.  If it's cracked, separated, folded over, etc. you need new blades.  All the best...

  • Like 1
Posted

GM must use different wiper blade suppliers. I have never found a blade that would last as long as the original ones on my 2015 Silverado, built at Flint. I hate the adapters and find them inferior to direct fit blades. I have used Bosh Icons and they were average life. I am now using Trico direct fit, they work good an are quiet.  I wonder how long these will last?

Posted (edited)

I don't know if it's the area I live in (St Louis MO) or just my luck, but I have never had a wiper issue with my 2016 Sierra. I use rain-x 2-in-1 wiper fluid and rain-x quantum blades. I wash my truck regularly and replace my blades annually. Maybe that's why I haven't had an issue, but even after a full year of use through 4 seasons I don't have much streaking or chatter from the blades. I just replace annually because I'm super picky when it comes to visibility. Windshield gets replaced a soon as it's cracked or gets a large chip, non-working headlights are replaced asap, and the windshield is always clean. Brakes and tires are another area I don't let get to a certain point.

Edited by midwestdenaliguy
  • 1 year later...
Posted
3 hours ago, Paul Pierce said:

I still have the original blades on my 2017 Silverado,  no streaks, or chatters, go figure?

Same here, before my recent service last month - I had them changed, just because, even though I really didn't need it.

Posted

Hard to beat the OEM's, also hard to pull out the VISA when they tell you how much🤔😬, but worth the expense.

 

 

  • Thanks 1
Posted
28 minutes ago, JimCost2014 said:

Hard to beat the OEM's, also hard to pull out the VISA when they tell you how much🤔😬, but worth the expense.

 

 

Yeah, it ain't cheap but, it's cheap insurance, so to speak. :)

 

IMG_0529.jpg

  • Like 1
Posted
10 minutes ago, MikeBMW said:

Yeah, it ain't cheap but, it's cheap insurance, so to speak. :)

 

IMG_0529.jpg

Yes sir, think that is what I pay here in Washington, but put on myself.

The passenger side entertains the neighbors, as I use some "colorful" language to get the old one off. Wife's Tahoe much easier on both front ones.

 

Found a You Tube video on the rear for the Tahoe, some fellow in the worst Christmas sweater ever changed his in 57 seconds, showed all of the tricks, now it is a breeze to swap out.

  • Thanks 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?
    • The use of absolutes like "always" to describe gear selection, and giving free advice at a boat ramp sounds like a recipe for disaster. It's a boat ramp, not a farm, for starters.   IMO gear selection should depend on the obstacle. If low range is working and this is a slower speed, controlled ordeal, I'd keep using that.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...